• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.100-104
• /
• 2000

Diamond film was deposited on Si substrate by using microwave plasma-enhanced chemical vapor deposition (MPECVD) system. After thinning the cross section between diamond film and Si substrate by ion milling method, we investigated its interface via transmission electron microscopy We could observe that the diamond film was grown either directly on Si substrate or via the interlayer between diamond film and Si substrate. Thickness of the interlayer was varied along the cross section. The interlayer might mainly composed of Sic andlor amorphous carbon. We could observe the well-developed electron diffraction pattern of both Si and diamond around the interface. Based on this result, we can conjecture the initial growth behavior of diamond film on Si substrate.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.67-72
• /
• 1999

Optimal pretreatment processes for metal plating on engineering plastics, especially on Nylon-inorganic filler alloy was studied. For Nylon-inorganic filler alloy, adhesion strength between resin surface and metal could be improved by just etching process that eliminate amorphous layer. In the SEM picture and surface roughness measurement, etching treatment was found to make enabled the surface condition very rough and the adhesion strength good. It was also found that the surface condition of plated article and its adhesion strength partly depended upon molding condition of Nylon-inorganic filler alloy. EDS, peaks showed that what kinds of and how much of the metal elements remained on the resin surface after pretreatment processes. Cr did not affect on adsorption of Sn and Pd remarkably.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.699-706
• /
• 2001

The effects of uniaxial drawing conditions on the molecular orientation of poly (ethylene 2,6-naphthalate) (PEN) are investigated. Birefringence measurements show that the orientation is significantly enhanced at high draw ratio, low drawing temperature, and fast drawing speed. The characteristics of orientation examined by FTIR- ATR dichroism method represent almost same results. Amorphous orientation function increases with drawing rate at $120^{\circ}C$, but it decreases with drawing rate at $141^{\circ}C$. These behaviors can be explained with the relation between crystallization and chain relaxation rates. It is observed that the orientation of PEN film is accompanied by significant alignment of the naphthalene rings of PEN parallel to the film surface.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.477-487
• /
• 2000

A series of poly(L-lactic acid) (PLLA)/poly($\beta$-hydroxynonanoate) (PHN) blend were prepared to study the miscibility and the crystallization behaviors. The thermal behaviors and characterization of PLLA/PHN blends Were studied using differential scanning calorimetry (DSC), XRD and polarizing optical microscopy (POM). The PLLA and PHN are partially miscible in amorphous region. The crystallinity of PLLA increased as the content of PHN increased, and T$_{g}$, T$_{c}$, and T$_{m}$ of PLLA shift as the content of PHN increased. Moreover, the number of PLLA spherulite increased as the content of PHN increased in the POM experiment. Thus, PHN acted as a nucleating agent to PLLA.

• The Korean Journal of Rheology
• /
• v.8 no.1
• /
• pp.58-68
• /
• 1996

고분자 가공에서 가장널리 사용되고 있는 사출공정은 비등온의 싸이클 공정이므로 사출조건에 따라 성형품은 다양한 형태의 열이력과 변형이력을 받게 되고 그 결과 최종성형 품의 기계적 물성이 현저히 달라지게 된다. 그러므로 우수한 물성을 갖는 성형품을 얻기위 해서는 열이력과 변형이력에 연관되어 나타나는 미세구조의 변화와 잔류응력을 최소화할수 있는 최적 성형조건의 선정이 대단히 중요하게 된다. 본 연구에서는 수치모사실험을 기초로 설정한 성형조건의 범위에서 다양한 사출성형실험을 수행하여 얻은 시편을 대상으로 미세구 조의 변화와 잔류응력에 미치는 성형조건의 영향을 조사함으로써 최적성형조건을 선정하기 위한 방안을 찾고자 하였다. 편광현미경을 사용하여 관찰한 결정성 고분자수지 시편의 내부 구조는 전형적인 skin-core 구조를 보일뿐만아니라 충전속도, 사출온도, 금형온도, 및 gate로 부터의 위치 변화에 따라 미세구조가 현저히 변함을 알수 있었으며 광탄성법과 layer removal method를 이용하여 조사한 무정형 고분지수 시편의 잔류응력은 금형온도와 사출압 에 가장 영향을 많이 받으며 두께 방향으로 parabola한 분포를 가짐을 알수 있었다. 이상의 결과로부터 사출조건의 변화에 따라 잔류응력과 내부구조가 현저히 변하게 되며 이는 성형 품의 물성에 직접적인 영향을 미치고 있음을 알수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.759-763
• /
• 1991

The dynamic rheological properties of the dope and the hydrated disperson of the soyprotein, as a starting material of soyprotein fiber, were studied to investigate their viscoelastic properties. The increase of protein concentration in the both cases of the dope and the dispersion resulted in the establishment of intermolecular reaction of the protein. With the addition of alkali solution to the dispersion, the dope shows the characteristics of very lightly cross-linked high molecular weight polymer. In constrast, the dispersion shows the properties of an amorphorous polymer. The effects of chemical modification of the dispersion on the dynamic properties were also investigated.

• YAKHAK HOEJI
• /
• v.54 no.4
• /
• pp.316-321
• /
• 2010

Adefovir dipivoxil which was originally developed by Gilead Sciences has been used as treatments of HIV and HBV, especially a therapeutics for HBeAg positive and negative chronic patients. We developed highly efficient purification method using reverse phase column chromatography for mass production and a stable amorphous Adefovir dipivoxil using solid dispersion method. Reverse phase column chromatography led to highly pure product, more than 99.7% by HPLC and can be used for mass production compared with normal column chromatography. Solid dispersion method containing watersoluble polymer and Isomalt showed improved stability of amorphous Adefovir dipivoxil against heat and moisture.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.811-817
• /
• 2001

Crystallization behaviour of bisphenol A polycarbonate(PC) from amorphous phase was studied by varing solvent/nonsolvent ratios in liquid phase. Chloroform and isopropanol were used as a solvent and a nonsolvent, respectively. Samples were characterized by optical microphotography, scanning electron microscope (SEM), X-ray diffaction (XRD), and differential scanning calorimeter (DSC). DSC and XRD measurement were used to determine the crystallinity of PC. The solubility constant seems to critical to control the PC crystallinity in solvent/nonsolvent mixture. The difference in PC crystallinity is explained by the difference in solubility constant of the mixture depending on the solvent/nonsolvent ratio. PC solution of 75/25 wt% (solvent/nonsolvent) ratio produced PC powder showing maximum crystallinity. At this condition solubility constant (9.85) of the mixed solvent was close to PC (9.9).

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.58-62
• /
• 2010

The acrylic monomers were graft-polymerized to starch as matrix polymer by emulsion polymerization. Viscosity and particle size of the emulsion were increased with starch contents due to interaction with water and particle swelling toward the water phase by hydroxy group of starch. Chemical stability of the emulsion was also increased with enhancement of starch, but water and alkali resistance were reduced with increasing starch contents because of the increasement of hyrophilicity. Opacity of the starch-acrylic emulsion compound containing calcium carbonate was decreased with contents of starch by its intrinsic color. The film of starch-acrylic polymer showed more clear appearance with increasing starch contents owing to enhancement of amorphous state.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.239-244
• /
• 2016

The catalytic applicability of various ionic liquids immobilized on different silica-supports such as amorphous, SBA, MCM and commercial silica for the cycloaddition of $CO_2$ and epoxides is reviewed in this work. The effects of different structures of supported ionic liquids and silica supports in the synthesis cyclic carbonate by the cycloaddition of $CO_2$ have been remarked. The studies revealed that ionic liquids possessing functional groups or metals exhibited increased catalytic performance towards cyclic carbonate synthesis. Moreover, the reusability of SSIL catalyst and mechanism for the cycloaddition of $CO_2$ were studied.