• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.354-361
• /
• 1999

The films annealed after physical deposition of titanium and chemical deposition of amorphous silicon by plasma were formed Si-rich titanium silicide with a good quality of crystallinity and had the various lattice structures due to orientation of lattices for epitaxy growth during annealing process. Band gap of the titanium silicide had 1.14~1.165 eV and the films annealed after chemical deposition of a-Si:H by plasma were influenced by a-Si and the dangling bond offered by desorption of hydrogen. Urbach tail ($E_0$) of the films annealed after physical deposition of Ti was nearly constant within a range of 0.045~0.05 eV, and the number of defect in films annealed after chemical deposition of a-Si:H by plasma was about 2~3 times more than that in annealed Ti/Si films.

• Applied Microscopy
• /
• v.33 no.2
• /
• pp.131-143
• /
• 2003

A Differentiating pathway of hemocytes in vitro and in vivo of grasshopper, Euprepocnemis shirakii was described using light and electron microscopes. In the interior of body, the stem cells of the hemopoietic organ differentiated into six types of cells respectively which are prohemoyte, plasmatocyte, granulocyte I, granulocyte II, spherulocyte and oenocytoid. The formation of these hemocytes was derived from the stem cells surrounded by a reticular cell. Hemopoietic tissue cultured in the insect media differentiated different hemocytes, but none of them underwent any mitotic division. Morphological features of the cultured cells in media were essentially the same as those of the hemocytes differentiated from the stem cells in vivo. These results were shown that each stem cell could differentiate into different types of hemocytes. It was confirmed that the stem cells possessed the pluripotent differentiation ability to directly each hemocyte, and that the once formed hemocytes in vivo and in vitro didn t undergo further transformation to other hemocytes. The maintenance of circulating hemocytes in grasshopper had been depended on the widely spreading hemopoietic organ situated in the upper surface of the dorsal alary muscle and located on the first to eighth segments.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.48-53
• /
• 2007

Pulverization characteristics of H-kenyaite in vibration mill and exfoliation property in epoxy of pulverized H-kenyaite was investigated by using XRD, SEM, TEM. and particle size analyzer. Pulverization was conducted for 0.5~5 h. The particle morphology of sample pulverized for 1 h preserved plate-shape. However, this plate-shape disappeared in the sample pulverized for 3 h. The XRD pattern of sample pulverized for 1 h showed the characteristic peak of H-kenyaite. However, the peak disappeared in samples pulverized above 3 h, indicating severe destruction of H-kenyaite structure. TEM analysis for the kenyaite/epoxy nanocomposites exhibited only gallery expansion of 3~5 nm in non-pulverized sample, but dramatical large expansion of 5~10 nm in the samples pulverized during 1 h. This results confirm that the pulverization of wide plates composed of H-kenyaite particle have largely affect on the formation of an exfoliated kenyaite-polymer nanocomposite.

• Applied Microscopy
• /
• v.41 no.1
• /
• pp.13-20
• /
• 2011

The ultrastructure of the matured egg envelope in Pond smelt, Hypomesus nipponensis belonging to Osmeridae, Osmeriformes were investigated by routine light and electron microscopes. The matured egg have two egg envelopes and have a single micropyle, which is thought to the pathway of sperm in the area of the animal pole. An outer egg envelope was surrounded by a follicular layer and outer surface of inner egg envelope have structure with high electron density. Also, the inner egg envelope consisted of 6 horizontal lamellae with higher electron density alternating with 5 interlamellae of lower electron density. Many grooves distributed on the outer surface of outer egg envelope, and the outer surface of inner egg envelope was covered by amorphous structures. In conclusion, the egg of teleost is surrounded by one egg envelope according to the studies on morphology of egg envelope up to the present. The fact that have two egg envelopes is a species specificity of Pond smelt and these ultrastructural characters of egg envelope can be utilized in taxonomy of teleost.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.73-82
• /
• 1990

Rosin-maleic anhydride adduct (RMA) was synthesized from rosin and maleic anhydride. The polyamideimides were obtained by reacting the adduct with two aromatic diisocyanates using sodium methoxide as catalyst. The yield and the inherent viscosity of polymers obtained by the reaction in NMP solvent were low because of the possible reaction of NMP solvent with diisocyanate monomer. The polymers were synthesized in solvent mixture of NMP and cosolvents such as xylene, acetophenone, benzonitrile, and nitrobenzene in order to minimize the side reaction of NMP with diisocyanates. The yield of polymer obtained by the reaction in NMP-nonpolar cosolvent mixtures was about 70% and that obtained by the reaction in NMP-polar cosolvent mixtures was over 90%, respectively. The polymers were either amorphous or poorly cystalline, and soluble only in highly polar solvents. The inherent viscosity of polymers ranges from 0.12-0.26dl/g. The results of thermal analysis showed that the polymer had good thermal stability with initial decomposition temperature over $330^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.94-102
• /
• 1993

The effects of temperature and of $Na_2O$ and $SiO_2$ contents on the crystallization of zeolite A were studied, by examining crystallization curves and particle size distributions of final products at various crystallization conditions. Crystallization process could be simulated adopting the assumptions of constant linear growth rate and equilibrium between amorphous solid phase and soluble species. Rate constants were determined by comparing the simulated crystallization curves with experimental data. Rate constant for linear growth increased with temperature and crystallization rate at different mole ratio of $Na_2O/H_2O$ correlated reasonably well with increase of soluble species. The rate constant of crystallization did not increase with increase in mole ratio of $Na_2O/H_2O$, but the rate of nuclei formation and the fraction of soluble species were enhanced. The rate constants for linear growth of zeolite A were determined as $0.07{\sim}0.24{\mu}m{\cdot}min^{-1}$ at these experimental conditions Apparent activation energy was estimated as $49kJ{\cdot}mol^{-1}$.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.794-798
• /
• 2001

$Y_{2-x}SiO_5:Ce_x^{3+}$(x=0.002∼0.04) phosphors were prepared by sol-gel process, amorphous crystal phase was observed in calcining dry gel at 800$^{\circ}$C, but pure $X_2$ type of type $Y_2SiO_5$ phase appeared from heat treatment above 1000$^{\circ}$C. Light absorption of tye $Y_2SiO_5$ host lattice occurred at 230∼360nm, and light absorption of the $Y_{2-x}SiO_5:Ce_x^{3+}$ phosphors was observed at 300∼400nm in adding $Ce^{3+}$. $Y_{2-x}SiO_5:Ce_x^{3+}$ phosphors showed maximum emission shoulder at 436nm. Maximum CL intensities of $Y_{2-x}SiO_5:Ce_x^{3+}$ were observed in adding 0.025 $Ce^{3+}$ and the phosphor showed x=0.161, y=0.124 in color coordinate of CIE1931.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.864-871
• /
• 2004

Porous pseudo-boehmite gel was prepared through the aging process of amorphous aluminum hydroxides gel precipitated by the hydrolysis reaction of dilute NaOH solution and AlCl$_3$ solution. In this study, the synthesis method was studied on porous pseudo-boehmite gel having maximum pore volume, as being investigated the changes of crystal structure, infrared rays absorption spectrum, BET surface area and pore structure when the hydrolysis reaction is controlled in the range of pH 7.6~11.6 and the aging process is hold up for 2~24 h at 60~10$0^{\circ}C$. We could find that the gel precipitates deposited in in range of pH 7.6~9.6 were developed into porous pseudo-boehmite which surface area was 250~357 $m^2$/g, pore volume was 0.4~0.7 cc/g and average pore size was 58~l14$\AA$. However, the gel precipitates deposited in range of pH 10.6~11.6 were developed into bayerite which pore volume was very little.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.175-181
• /
• 2006

Hybrid process of thermally-induced phase separation and stretching was developed for the preparation of microporous polypropylene hollow fiber membranes. Precursor for stretching was prepared by using soybean oil as a diluent and benzoic acid as a nucleating agent far the sphenlite control and it was stretched far the micrporous hollow fiber membrane. The effects of stretching ratio and deformation rate for stretching process were investigated. Increase of stretching ratio resulted in the greater pore size with nonuniform size distribution. Higher deformation rate also increaser the pore size with uniform size distribution. Stretching ratio was closely related with the orientation of polymer chain and increased the mechanical strength of the fiber. Increase of deformation rate had little effects on the orientation of crystalline phase, and decreased the orientation of amorphous phase which caused the decrease of tensile strength of the fiber and broke the micro-fibrils connecting spherulites to form a circular pore shape.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.146-151
• /
• 2011

The physical properties of poly (ethylene 2,6-naphthalate) (PEN) copolymers were studied. PEN copolymers were synthesized successfully from the mixtures of ethylene glycol(EG), 1,3-propanediol (PD) and l,4-butanediol (BD) with 2,6-dimethyl naphthalene dicarboxylate. The results indicated that PEN copolymers showed an amorphous state when the content of BD(PD) in applied EG/BD(EG/PD) mixtures was less than 40% during the polycondensation. As a result, the lowering of thermal properties, orientation, and mechanical properties was found, however, the dimensional stability was improved. This is a promising result to apply the synthesized PEN copolymers as flexibles substrates.