• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.147-154
• /
• 1989

The experiments were carried out to compare the growth characteristics of excised seminal roots in Japonica type, Indica- Japonica hybrids and its parents. Based on the modified culture medium by Kawata et al., several levels of pH. sucrose and casamino acid were varied in the culture media. The excised root length at 27$^{\circ}C$ incubator was little different between Japonica type and Indica-Japonica hybrids, but at 30$^{\circ}C$ incubator the excised root elongation of Indica-Japonica hybrids was much better than that of Japonica type. The dry matter weight of excised root in Indica- Japonica hybrids was significantly heavier than in Japonica type at both 27 and 30$^{\circ}C$ incubators. The difference of dry root weight between Japonica type and Indica- Japonica hybrids was caused from the number of lateral roots, especially the root numbers of 25 cm length. The main and lateral seminal root growth of Japonica type grew best at the lot of 0.2 percent casamino acid. However, the lots of 0 and 0.2 percent casamino acid showed good results in the main and lateral excised root growth. respectively of Indica-Japonica hydrids. The growth of excised roots was better in Indica-Japonica hybrids than in Japonica type at even various levels of pH, sucrose and casamino acid. Between the parents of Indica - Japonica hybrids, the excised root growth of Indica type was more predominant than that of Japonica type, and the effect of casamino acid on the excised root growth in the formar was similar to that of Indica type. This result indicated that the growth characteristics of excised seminal roots in Indica Japonica hybrids were derived from the parent, Indica type.

• Korean Journal of Poultry Science
• /
• v.20 no.4
• /
• pp.217-231
• /
• 1993

Due to the increased awareness on the relationship between high cholesterol intake and cardiovascular disease, the development of low cholesterol eggs and egg products are necessary at the present time. Largely, two approaches are possible to develop low cholesterol eggs. The first approach is the production of low cholesterol eggs by altering feeds of layers, by administering drugs, by genetic selection of strains and breeds, and by management of laying cycle, age and egg size. The second approach is to manufacture low cholesterol eggs technically treated with adsorbant, solvent, enzyme, edible oil and supercritical fluid. Both approaches have their own pros and cons, respectively, as far as the cholesterol removal rates, the easeness of process, and the economic reasons are concerned. The low cholesterol egg production is quite labor-intensive and has relatively low cholesterol removal rate(30∼50％ ) compared to that of chemically treated eggs. On the other hand, the low cholesterol eggs treated with chemicals have a very high cholesterol removal rate (80∼90％) but some of the methods are not completely safe as food processing purposes due to the residual chemicals and the sensory quality is not as good as the low cholesterol eggs without chemical treatment. Therefore, further studies must be conducted to improve the sensory quality of low cholesterol eggs and to eliminate fear about the harmfulness using low cholesterol eggs.

• Korean Journal of Weed Science
• /
• v.7 no.2
• /
• pp.156-164
• /
• 1987

Allelopathic activity of dominant upland weed species was determined using aqueous and methanol extracts and dried residues of the weeds. Germination and seedling growth of radish (Raphanus sativus L.) and sesame (Sesamum indicum L.) were greatly inhibited by 2% (w/v) aqueous extracts of Artemisia asiatica Nakai and Portulaca oleracea L., respectively. Great phytotoxicity on both indicator plants occurred by 2% (w/v) aqueous extracts of Capsel/a bursa-pastoris (L.) Medik. A complete inhibition in germination and seedling growth of radish was caused by 2% (w/v) methanol extract of A. asiatica. There was about 90% inhibition in germination and seedling growth of sesame due to 2% (w/v) methanol extracts of A. asiatica, P. oleracea and Trifolium repens L. Phytotoxic effects varied with extract solution, weed species and indicator plants employed, indicating that the weed species contained different contents and kinds of allelopathic chemicals. Water potential and pH adjusted to those of the extracts did not affect germination and seedling growth of the indicator plants. Phytotoxicity increased with increasing concentration of the extracts obtained from four suspected alleopathic weeds. Soil-incorporated plant residues of A. asiatica and P. oleracea caused greater phytotoxicity on radish than those of C. bursa-pastoris and T. repens.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4331-4337
• /
• 2010

This study was to investigate the effectiveness of deep neck flexor exercise with using modalities in pain reduction and functional improvement to those who have chronic neck pain. The subjects were instructed the patients with chronic neck pain (37 people). Randomized study design of two groups was used: Only using modalities group and deep neck flexor exercise group with using modalities, and each group was taken by three times per week for 12 weeks. To evaluate the effects of therapies was to research the questionnaire about VAS(visual analog scale), NDI(neck disability index), and endurance of deep neck flexor before experiment, after 6 weeks and after 12 weeks. In visual analog scale(VAS) and neck disability index(NDI), there were significant decreased in using modalities group and deep neck flexor exercise group after 6 weeks more than before experiments but were only significant decrease in deep neck flexor exercise group after 12 weeks. The endurance of deep neck flexor was significantly increased in deep neck flexor exercise group after 6 weeks and 12 weeks more than before experiments. Thorough these results deep neck flexor exercise has the effectiveness to the therapies of chronic neck pain. Using the deep neck flexor exercise would be high effects on pain reduction and functional improvement and also considered in improving the living qualities of those who have chronic neck pain.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.214-221
• /
• 2019

Visual perception information acquired through human eyes contains much information on how to view visual stimuli using eye tracking technology, it is possible to acquire and analyze consumer visual information as quantitative data. These measurements can be used to measure emotions that customers feel unconsciously, and they can be directly collected by numerically quantifying the character's search response through eye tracking. In this study, we traced the character's area of interest (AOI) and found that the average of fixation duration, count, average of visit duration, count, and finally the time to first fixation was analyzed. As a result of analysis, it was found that there were many cognitive processing processes on the face than the character's body, and the visual attention was high. The visual attention of attraction factor has also been able to verify that attraction is being presented as an important factor in determining preferences for characters. Based on the results of this study, further studies of more characters will be conducted and quantitative interpretation methods can be used as basic data for character development and factors to be considered in determining character design.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.215-222
• /
• 2019

The heat conduction problem with discontinuous material coefficients generally consists of the conservative equation, boundary condition, and interface condition, which should be additionally satisfied in the solution procedure. This feature often makes the development of new numerical schemes difficult as it induces a layered singularity in the solution fields; thus, a special approximation is required to capture the singular behavior. In addition to the approximation, the construction of a total system of equations is challenging. In this study, a wedge function is devised for enriching the approximation, and the interface condition itself is embedded in the moving least squares(MLS) derivative approximation to consistently satisfy the interface condition. The heat conduction problem is then discretized in a strong form using the developed derivative approximation, which is named as the interface immersed MLS difference method. This method is able to efficiently provide a numerical solution for such interface problems avoiding both numerical quadrature as well as extra difference equations related to the interface condition enforcement. Numerical experiments proved that the developed numerical method was highly accurate and computationally efficient at solving the heat conduction problem with interfacial jump as well as the problem with a geometrically induced interfacial singularity.

• The Korean Journal of Applied Statistics
• /
• v.34 no.3
• /
• pp.309-327
• /
• 2021

Dynamic treatment regimes (DTRs) are decision-making rules designed to provide personalized treatment to individuals in multi-stage randomized trials. Unlike classical methods, in which all individuals are prescribed the same type of treatment, DTRs prescribe patient-tailored treatments which take into account individual characteristics that may change over time. The Q-learning method, one of regression-based algorithms to figure out optimal treatment rules, becomes more popular as it can be easily implemented. However, the performance of the Q-learning algorithm heavily relies on the correct specification of the Q-function for response, especially in observational studies. In this article, we examine a number of double-robust weighted least-squares estimating methods for Q-learning in high-dimensional settings, where treatment models for propensity score and penalization for sparse estimation are also investigated. We further consider flexible ensemble machine learning methods for the treatment model to achieve double-robustness, so that optimal decision rule can be correctly estimated as long as at least one of the outcome model or treatment model is correct. Extensive simulation studies show that the proposed methods work well with practical sample sizes. The practical utility of the proposed methods is proven with real data example.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.431-445
• /
• 2022

A quantitative phase analysis method of X-ray powder diffraction was studied to determine the mineral content of clay-rich rocks practically as well as effectively. For quantitative X-ray powder diffraction analysis of the clay-rich rocks, it is necessary to prepare whole-rock powder samples with a random orientation by side mounting method. In addition, for the identification of the clay minerals in the rock, it is required to prepare an oriented mount specimen with a clay particle size of 2 ㎛ or less, ethylene glycol treatment, and heat treatment. RIR (reference intensity ratio) and Rietveld method were used for the quantitative analysis of the clay-rich rocks. It was possible to obtain the total clay and the non-clay minerals contents from the whole-rock X-ray diffraction profiles using the RIR values. In addition, it was possible to calculate the relative content of each clay mineral from the oriented X-ray diffraction profiles of the clay particle size and assign it to the total clay. In the Rietveld method of whole-rock X-ray diffraction, effective quantitative values were obtained from the Rietveld diffraction patterns excluded the region of less than 10 degrees (2θ). Similar quantitative values were shown in not only the RIR but the Rietveld methods. Therefore, the analysis results indicate a possibility of a routine quantitative analysis of clay-rich rocks in the laboratory. However, quantitative analysis of clay minerals is still a challenge because there are numerous varieties of clay minerals with different chemical and structural characteristics.

• Geophysics and Geophysical Exploration
• /
• v.25 no.1
• /
• pp.14-25
• /
• 2022

The passive surface wave method measures seismic signals from ambient noises or vibrations of natural phenomena without using an artificial source. Since passive sources are usually in lower frequencies than artificial ones being able to ensure the information on deeper geological structures, the passive surface wave method can investigate deeper geological structures. In the passive method, frequency dispersion curves are obtained after data acquisition, and the dispersion curves are analyzed by assuming 1D-layered earth, which is like the method of active surface wave survey. However, when computing dispersion curves, the passive method first obtains and analyzes coherence curves of received signals from a set of receivers based on spatial autocorrelation. In this review, we explain how passive surface wave methods measure signals, and make data processing and interpretation, before analyzing field application cases.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.93-100
• /
• 2006

The lateral soil movement in soft grounds undergoing improvement with application of vertical drains is analyzed on the basis of monitoring data at three fields, in which fifty six monitoring sites are located. Based on the investigations, the criterions are suggested to predict the lateral soil movement. In order to predict the lateral soil movement in the improved soft grounds by using the dimensionless parameter R suggested by Marche & Chapuis (1974), it is desirable that the maximum lateral displacement in the soft ground below the toe of embankment should be applied to calculate R instead of the lateral displacement at the toe of embankment. The lateral soil movement may increase rapidly, if the safety factor of slope is less than 1.4 in case of high ratio of H/B (Thickness of soft ground/Embankment width) such as 1.15 or is less than 1.2 in case of low ratio of H/B such as 0.05. Also, the graph suggested by Tschebotarioff (1973), which illustrates the relationship between the maximum height of embankments and the undrained shear strength of soft grounds, can be applied to the evaluation for the possibility of the lateral soil movement due to embankments on soft grounds.