• The Journal of Society for e-Business Studies
• /
• v.13 no.1
• /
• pp.21-32
• /
• 2008

RFID systems provide technologies of automatic object identification through wireless communications in invisible ranges and adaptability against various circumstances. These advantages make RFID systems to be applied in various fields of industries and individual life. However, it is difficult to use tags with distinction as tags are increasingly used in life because a tag usually stores only one object identifier in common RFID applications. In addition, RFID systems often make serious violation of privacy caused by various attacks because of their weakness of radio frequency communication. Therefore, information sharing methods among applications are necessary for expansive development of RFID systems. In this paper, we propose efficient RFID scheme. At first, we design a new RFID tag structure which supports many object identifiers of different applications in a tag and allows those applications to access them simultaneously. Secondly, we propose an authentication protocol to support the proposed tag structure. The proposed protocol is designed by considering of robustness against various attacks in low cost RFID systems. Especially, the proposed protocol is focused on efficiency of authentication procedure by considering security levels of applications. In the proposed protocol, each application goes through one of different authentication procedures according to their security levels. Finally, we prove efficiency of th proposed scheme compared with the other schemes through experiments and evaluation.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.175-184
• /
• 2005

PDA(Personal Digital Assistants) and laptop computer that are small sized mobile implements are typical devices which capable of using wireless internet. They seem to have a tendency to possess multi-function as well as to miniaturize in accordance with taking advantage of today's digital convergence circumstance. It should be considered that the pointing input device of these mobile computer that have PDA size and laptop's performance has to be added to something very small instead of 4-button, 5-button navigator and with the electric pen. The basic framework for this study is to investigate the usability of the two input devices Trackpoint and Touchpad which regarded as a alternative pointing device for small sized mobile computer. 14 novice subjects compared a Trackpoint to a Touchpad across five curser-control tasks. The study found that subjects executed not more slowly with a Trackpoint input device than with the Touchpad. Observation shows that learning for Trackpoint appears to have had more than for the Touchpad. Subjects expressed preference for the Trackpoint in general work.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.493-504
• /
• 2007

With the advance and proliferation of computer and wireless network technology, it is common to access to network through the wireless network using mobile device. The ratio of using the streaming media out of many applications through the network is increasing not only in the wired network but also in the wireless network. The streaming media is much bigger than other contents and requires more network bandwidth to communicate and more computing resources to process. However the mobile devices have relatively poor computing resource and low network bandwidth. If the streaming media service is provided for mobile devices without any consideration about the network bandwidth and computing power, it is difficult for the client to get the service of high quality. Since especially mobile devices are supported with very limited energy capacity from the battery, the streaming media service should be adjusted to the varying energy state of mobile devices to ensure the complete playback of streaming media. In this paper, we propose a new method to guarantee the complete playback time of the streaming media for the mobile clients by dynamically controlling transmitted frame rate to the client according to the estimated available time of mobile device using battery model reflecting the characteristic of the battery. Since the proposed method controls the number of frames transmitting to the client according to the energy state of the mobile device, the complete playback time is guaranteed to mobile clients.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.94-106
• /
• 2020

Recently, the radio navigation method utilizing the GPS(Global Positioning System) satellite information is widely used as the method to measure the position of objects. As GPS applications become wider and fields based on various positioning information emerge, new methods for achieving higher accuracy are required. In the case of autonomous vehicles, the INS(Inertial Navigation System) using the IMU(Inertial Measurement Unit), and the DR(Dead Reckoning) algorithm using the in-vehicle sensor, are used for the purpose of preventing degradation of accuracy of the GPS and to measure the position in the shadow area. However, these positioning methods have many elements of problems due not only to the existence of various shaded areas such as building areas that are continually enlarged, tunnels, underground parking lots and but also to the limitations of accumulation-based location estimation methods that increase in error over time. In this paper, an efficient positioning method in a large underground parking space using Fingerprint method is proposed by placing the AP(Access Points) and directional antennas in the form of four anchors using WLAN, a popular means of wireless communication, for positioning the vehicle in the GPS shadow area. The proposed method is proved to be able to produce unchanged positioning results even in an environment where parked vehicles are moved as time passes.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.1-8
• /
• 2010

Clients require easy to use of product and operating and industry safety according to the change of a market and a factory. For overcoming it, this paper developed controller of take-out robots that take high speed and superprecision and supplement a week point as use the system based on network. development controller classify teaching pendant and center server PC. Center server PC service the information about all process to supervisor. Teaching pendant is the bridge that service various faculties such as control, user recognition, metallic pattern operation to the user using injection molding. The controller development for taking out injection molded body classify software and hardware. The development of software is divided into three step which is application program, user interface and device driver. the simple device driver is not classified and included in application program. The hardware induce the touch panel and wireless network and construct the effective process control and internet connection. The inject ion cycle of existing system was five second but advanced system has the inner four cycle, process efficiency and product operation through wireless network.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.919-929
• /
• 2013

Recently, a variety of IT technologies are applied to the vehicle. However, some vehicle-IT technologies without security considerations may cause security problems. Specially, some researches about a smart key system applied to automobiles for authentication show that the system is insecure from replay attacks and modification attacks using a wireless signal of the smart key. Thus, in this paper, we propose an authentication method for the driver by using driving patterns. Nowadays, we can obtain driving patterns using the In-vehicle network data. In our authentication model, we make driving ppatterns of car owner using standard normal distribution and apply these patterns to driver authentication. To validate our model, we perform an k-fold cross validation test using In-vehicle network data and obtain the result(true positive rate 0.7/false positive rate is 0.35). Considering to our result, it turns out that our model is more secure than existing 'what you have' authentication models such as the smart key if the authentication result is sent to the car owner through mobile networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1167-1174
• /
• 2009

In the monitoring of a patient in a sickroom, not only the physiologic and environmental data of the patient, which is automatically measured, but also the clinical data(clinical chart)of the patient, which is drew up by a doctor or nurse, are recognized as important data. However, since in the current environment of a sickroom, clinical data is collected being divided from the data that is automatically measured, the two data are used without an effective integration. This is because the integration of the two data is difficult due to their different collection times, which leads the reconstruction of clinical data to be remarkably uncertain. In order to solve these problems, a method to synchronize the continuous environmental data of a sickroom and clinical data is appearing as an important measure. In addition, the increase of use of small machines and the development of solutions based on wireless communications provide a communication platform to the developers of health care. Thus, this paper realizes a remote system for taking care of patients based on a web that uses mobile phones. That is, clinical data made by a nurse or doctor and the environmental data of a sick room comes to be collected by a collection module through a wireless sensor network. An observer can see clinical data and the environmental data of a sickroom through his/her mobile phone, integrating and storing his/her data into the database. Families of a patient can see clinical data made by hospital and the environment of the sick room of the patent through their computers or mobile phones outside the hospital. Through the system,hospital can provide better medical services to patients and their families.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.775-788
• /
• 2006

Many disaster monitoring systems are constantly studied to prevent disasters such as environmental pollution, the breaking of a tunnel and a building, flooding, storm earthquake according to the progress of wireless telecommunication, the miniaturization of terminal devices, and the spread of sensor network. A disaster monitoring system can extract information of a remote place, process sensor data with rules to recognize disaster situation, and provide work for preventing disaster. However existing monitoring systems are not enough to predict and prevent disaster, because they can only process current sensor data through utilizing simple aggregation function and operators. In this paper, we design and implement a disaster prevention system to predict near future dangerous area through using outside sensor network and spatial Information. The provided prediction technique considers the change of spatial information over time with current sensor data, and indicates the place that could be dangerous in near future. The system can recognize which place would be dangerous and prepare the disaster prevention. Therefore, damage of disaster and cost of recovery would be reduced. The provided disaster prevention system and prediction technique could be applied to various disaster prevention systems and be utilized for preventing disaster and reducing damages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.1-7
• /
• 2012

At the industrial work site, the manufacturing process is being automated to improve work efficiency. However, it is often difficult to automate the entire manufacturing process, and there are spaces in which workers there are constantly exposed to danger. To protect such workers from the danger, this paper studied a worker safety management system for the industrial work site which uses a location recognition system and which is based on the Ubiquitous-Wireless Sensor Network (U-WSN). Using wireless signals, the distance between two devices can be measured and the location of a worker can be calculated using triangularization in 3-D. But at the industrial work sites where there are a lot of steel and structures, errors occur due to signal reflection and multi-path, etc., which makes it difficult to get the accurate location. To address this problem the following was done: first, a circular polarization patch antenna appropriate to the work site was used to reduce the degree of error that may occur from the antenna emission pattern and the particular Line of Sight (LOS); second, a 3-D localization technique and a filtering algorithm were used to improve the accuracy of location determination. The developed system was tested by using it on a wharf crane to validate its accuracy and effectiveness. The proposed location recognition system is expected to contribute greatly in ensuring the safety of workers at industrial work sites.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.51-56
• /
• 2009

Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp.