• Title/Summary/Keyword: 무선 수신부

Search Result 187, Processing Time 0.031 seconds

An Error-Tolerant Large Data Transmission between IoT Devices using Inaudible High-Frequencies (IoT 기기 간 비가청주파수를 활용한 대량의 데이터 전송에서의 오류 극복방법)

  • Park, Jong-Hyeok;Lee, Han-bum;Choi, Won-hoo;Yeom, Sanggil;Choo, Hyunseung
    • Annual Conference of KIPS
    • /
    • 2015.10a
    • /
    • pp.341-342
    • /
    • 2015
  • 무선통신기술은 연결 중심의 IoT 시대에서 중요한 역할을 하고 있다. IoT 기기 간 데이터 통신을 위해 Bluetooth, NFC와 같은 기술이 활용되지만, 호환성의 문제가 있다. 비가청주파수를 활용한 데이터 통신 연구는 기존의 무선통신기술이 가지는 모듈 의존성, OS 종속성 문제를 해결하였다. 하지만 기존 연구 결과는 소량 데이터만 전송 가능하고, 데이터 전송량을 늘릴 경우 전송시간 대비 효율이 낮았다. 본 논문에서는 비가청주파수를 활용하여 대량의 비트를 여러 개의 프레임으로 나누어 연속적으로 전송하기 위한 통신 프로토콜을 제안한다. 이는 소량 데이터를 전송하는 기존 연구 결과의 높은 정확도와 함께 송신부와 수신부의 유기적인 상호작용을 통해 대량의 데이터 전송에 적합한 알고리즘이다.

A Bluetooth/WiFi Dual-Mode RF Front-End Module Using LTCC Technology (LTCC 기술을 이용한 Bluetooth/WiFi 이중 모드 무선 전단부 모듈 구현)

  • Ham, Beom-Cheol;Ryu, Jong-In;Kim, Jun-Chul;Kim, Dong-Su;Park, Young-Cheol
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.23 no.8
    • /
    • pp.958-966
    • /
    • 2012
  • This paper presents a compact bluetooth/WiFi dual-mode dual-band RF front-end module(FEM) is realized by low temperature co-fired ceramic(LTCC) technology. The proposed RF front-end module consists of a diplexer, baluns in the LTCC substrate, and an SPDT switch, an SP3T switch on the LTCC substrate. In order to reduce the module size and increase integration level, the proposed diplexer and balun are designed using LC lumped elements. The parasitic elements caused by coupling effect between metal pattern layers and ground plane layer are considered during the design. The fabricated dual-mode RF front-end module has 13 pattern layers including three inner ground layers and it occupies less than $3.0mm{\times}3.7mm{\times}0.66mm$.

Design and Implementation of Wireless Multicommunication Circuit Based On USN (USN 기반의 무선 멀티 커뮤니케이션 회로 설계 및 구현)

  • Sim, Gab-Sig;Jang, Jae-Hyuk
    • The Journal of the Korea Contents Association
    • /
    • v.11 no.8
    • /
    • pp.33-42
    • /
    • 2011
  • In this paper we designed and implemented a wireless communication circuit which can control the remote devices integrating RFID and ZigBee. This system unifies transmit part and receive part. And this system recognizes RFID tag data, then the recognized information is controlled by MCU, and transmitted to a remote device through the ZigBee. This is operated on TinyOS. If this system is applied to a entrance security system, it can permit/deny one's entrance as well as control the personal computer or other electronic devices. Our experiment shows the result of the recognized data transmission is very different according to a opened playground and a closed place. The data transmission time is stable in the indoor and the data transmission distance is long in the outdoor. We anticipate that our system be applied the various office oriented domains by connecting to the Wired LAN or the WLAN of IEEE 802.11x category.

FGPA Design and SoC Implementation for Wireless PAN Applications (무선 PAN 응용을 위한 FPGA 설계 및 SoC)

  • Kim, Young-Sung;Kim, Sun-Hee;Hong, Dae-Ki
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.9 no.2
    • /
    • pp.462-469
    • /
    • 2008
  • In this paper, we design the FPGA (Field-Programmable Gate Array) of the KOINONIA WPAN (Wireless Personal Area Network), and implement the SoC (System on Chip). We use the redundant bits to make a constant-amplitude in a modulator part. Additionally, the SNR (Signal to Noise Ratio) performance of the demodulator is improved by using the redundant bits in decoding steps. The four-million FPGA of the KOINONIA WPAN can be operated at 44MHz frequency. The PER (Packet Error Rate) of the designed FPGA with RF (Radio Frequency) module is below 1% at the -86dB MIPLS (Minimum Input Power Level Sensitivity), and the SNR is about 13dB. The SoC is implemented by using Hynix 0.25um CMOS (Complementary Metal Oxide Semiconductor) process. The size of the SoC is $6.52mm{\times}6.92mm$.

Design and Implementation of Baseband Modem Receiver for MIMO-OFDM Based WLANs (MIMO-OFDM 기반 무선 LAN 시스템을 위한 기저대역 모뎀 수신부 설계 및 구현)

  • Jang, Soo-Hyun;Roh, Jae-Young;Jung, Yun-Ho
    • Journal of Advanced Navigation Technology
    • /
    • v.14 no.3
    • /
    • pp.328-335
    • /
    • 2010
  • In this paper, an efficient algorithm and area-efficient hardware architecture have been proposed for $2{\times}2$ MIMO-OFDM based WLAN baseband modem with two transmit and two receive antennas. To enhance the performance of the receiver, the efficient timing synchronization algorithm and symbol detector based on MML algorithm are presented. Also, by sharing the hardware block with multi-stage pipeline structure and using the complex multiplier based on polar-coordinate, the complexity of the proposed architecture is dramatically decreased. The proposed area-efficient hardware design was designed in hardware description language (HDL) and synthesized to gate-level circuits using 0.13um CMOS standard cell library. As a result, the complexity of the proposed modem receiver is reduced by 56% over the conventional architecture.

Study on signal processing techniques for low power and low complexity IR-UWB communication system using high speed digital sampler (고속 디지털 샘플러 기술을 이용한 저전력, 저복잡도의 초광대역 임펄스 무선 통신시스템 신호처리부 연구)

  • Lee, Soon-Woo;Park, Young-Jin;Kim, Kwan-Ho
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.12 s.354
    • /
    • pp.9-15
    • /
    • 2006
  • In this paper, signal processing techniques for noncoherent impulse-radio-based UWB (IR-UWB) communication system are proposed to provide system implementation of low power consumption and low complexity. The proposed system adopts a simple modulation technique of OOK (on-oft-keying) and noncoherent signal detection based on signal amplitude. In particular, a technique of a novel high speed digital sampler using a stable, lower reference clock is developed to detect nano-second pulses and recover digital signals from the pulses. Also, a 32 bits Turyn code for data frame synchronization and a convolution code as FEC are applied, respectively. To verify the proposed signal processing techniques for low power, low complexity noncoherent IR-UWB system, the proposed signal processing technique is implemented in FPGA and then a short-range communication system for wireless transmission of high quality MP3 data is designed and tested.

Implementation of Wireless Power Transmission System for Multiple Receivers Considering Load Impedance Variation (부하 임피던스 변화를 고려한 복수 수신기 무선전력전송 구현)

  • Kim, Young Hyun;Park, Dae Kil;Koo, Kyung Heon
    • Journal of Advanced Navigation Technology
    • /
    • v.22 no.2
    • /
    • pp.148-153
    • /
    • 2018
  • This paper proposes a single-input multiple-output (SIMO) self-resonant wireless power transmission system for transmitting power to multiple receivers and the characteristics are simulated and measured. A 600 mm diameter transmission single loop, a 600 mm diameter helical transmission resonant coil, an external diameter 900 mm planar spiral reception resonant coil, and an $80{\times}60mm^2$ flat plate square coil as a receiver are used to form a wireless power transmission system 600 mm away with the table structure. For optimal characteristics, the wireless power transmission coils are designed by EM simulation and equivalent circuit analysis, and the characteristics are simulated and measured. The variation of the efficiency with distance from the center of the spiral resonant coil is analyzed and the measured efficiency is 57% for one receiver and for the two receivers, the efficiency is 37% for each receiver.

Design and Implementation of Smart Farm Monitoring System Based on USN (USN 기반 스마트 팜 모니터링 시스템 설계 및 구현)

  • Kwon, Sook-Youn;Lim, Jae-Hyun
    • Proceedings of the KAIS Fall Conference
    • /
    • 2011.12b
    • /
    • pp.701-703
    • /
    • 2011
  • 본 논문에서는 태양광병용형 식물공장과 USN 기술이 융합된 스마트 팜 모니터링 시스템을 설계 및 구현하고자 한다. 먼저 식물공장의 규모 및 내부 환경 정보 수집에 적합한 무선 통신 모듈과 온도, 습도, 조도, PPFD, 일사량 센서를 선택한 뒤, 각 센서를 통합하기 위한 PCB 모듈을 설계 및 제작한다. 제작된 통합센서는 송신부와 수신부가 포함되어 있으며 일정 간격마다 USN 게이트웨이의 요청에 의해 식물공장 내부의 환경 정보를 측정하여 서버로 전송하고, 전송된 데이터는 서버관리자에 의해 데이터베이스에 저장 및 각 환경 정보와 연관된 디바이스 제어 시 입력 요소로 사용된다. 향후 본 시스템을 확장 및 적용할 경우 태양광병용형 식물공장의 생산 효율이 증대되고, 에너지 소비 효율을 향상시킬수 있을 것으로 기대된다.

  • PDF

Design of Remote & Wireless Control System for Submarine using RF (RF를 이용한 잠수함 무선 원격시스템 제어 설계)

  • Kim, Young-Keun;Ryu, Kwang-Ryol;Hur, Chang-Wu
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2007.10a
    • /
    • pp.192-195
    • /
    • 2007
  • 본 논문에서는 RF 모듈을 탐재한 Atmega 시스템 설계를 통한 잠수함 원격 제어 시스템을 구현한다. 본 연구에서 제작한 RC 잠수함은 실제 잠수함의 원리와 비슷하게 잠항을 할 때는 소형펌프로 밸러스트탱크에 물을 채우고, 잠수를 할 때 수직타와 추진력을 이용하여 잠항을 한다. 이와 반대로 부상은 소형펌프로 밸러스트탱크 안에 물을 배수하여 WTC(방수실린더)안의 기압과 수직타와 추진력을 이용하여 부상을 한다. RC 잠수함은 크게 외부와 내부 그리고 방수를 하기 위한 WTC(방수 실린더)로 나누어진다. 송신 부는 RF 모듈, MCU(Atmega128), 키패드, 캐릭터LCD로 구성되며 수신부는 MCU(Atmega128), RF 모듈, 제어장치들로 구성한다. 제어장치에는 모형 잠수함은 추진력을 위하여 DC 모터에 스크류(프로펠러)를 장착하고, 방향전환 및 잠항과 부상을 위하여 RC 서보 모터를 사용하고 잠항과 부상을 위하여 펌프를 사용한다. WTC는 방수실린더로서 아크릴파이프를 이용하여 제작하고 방수를 위하여 아크릴파이프를 이용 여기에 MCU와 제어 장치들을 넣어 밀봉시켜 방수를 하여 완성한다.

  • PDF

Development of Diagnosis Device for Pole and Pad Transformer using Wireless Data Communication (무선 데이터 통신을 이용한 주상 및 지상 변압기 진단 장치 개발)

  • 윤용한;민경래;최도혁;김재철
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.14 no.6
    • /
    • pp.85-92
    • /
    • 2000
  • This paper has developed the system that can monitor the distribution transformers(pole and pad) using simplified deterioration detecting sensor in oil and wireless data communication. This system is made up by deterioration detecting sensor, oil level measuring system, deterioration measuring system and communication unit. To prove the usefulness of the system, the paper compared and analyzed the system with the existed system, and after studying the correlation of the both, the result proved goodness of the new system. The proposed monitoring system, when it is used on the pole and pad transformer, would make the reliable diagnoses possible with less rate.

  • PDF