• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.605-610
• /
• 2021

Wireless charging method using a laser is considered as the most efficient method at a long distance of the wireless charging method. Combining long-range laser wireless charging technology with wireless communication technology will make it possible to use it for a variety of applications. Accordingly, this paper shows the results of research and experiments on wireless charging and wireless communication simultaneously based on a laser. This technique uses a laser as a light source for E/O(: Electric-to-Optical) conversion at the transmitter for optical wireless power transmission. In the experimental results, the optical power transmission using a 100 mW laser transmitter and a solar cells receiver showed a DC-to-DC efficiency of 1.9 %, wireless optical communication showed a transmission speed of up to 90 kbps when the transmission distance is 15 m.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.35-43
• /
• 2014

In this paper, it is about to non-contact wireless power transmission according to various conditions of self induction principle between the two planar coils at a transmission unit and a receiving unit based on the theory of wireless power transmission. The experiments are occurred in order to power transfer of noncontact method from designed wireless circuits in the primely coil and secondary coil, and the applying to Half Bridge Resonant converter transmission unit and receiving unit. and that were able to prepared circumstance to calculate of the output voltage and power source. The main power of the inductive coupling the resonant converter at the transmission unit is converted electrical energy using the solar cell module and artificial light source (halogen lamp) as a replace light and received 24 V power supply from solar power was used a input power source for the wireless power transmission device. Experimental results, to received of power is used to illuminate the lighting and to charge the battery in receiving circuit.And the wireless power transmission efficiency measured at the output side of the transmission unit is obtained about 70% to 89% compared to input power of receiving unit.In addition, efficiency were tested through ID verification method and comparing the phase difference between the voltage when foreign substances interfere with wireless power transmission.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.136-138
• /
• 2019

무선급전 시스템에서 대기 모드 시에도 전력을 소모하는 비중이 큰 수신부 통신 모듈을 OFF 시켜서 대기전력을 낮출 수 있다. 이때 대기모드 시 PFC 동작을 OFF 시키게 되면 추가로 대기전력을 더 낮출 수 있지만 PFC가 OFF된 상태에서는 AC 입력전압 크기에 따라 인버터 입력 전압 범위가 크게 변동하게 된다. 하지만 수신 통신 모듈 OFF시에는 무선통신을 통한 출력전압제어를 할 수 없기 때문에 안정적인 전력전달이 힘들다. 따라서 본 논문에서는 대기모드 시 출력전압을 일정 수준으로 제어하기 위해, 입력전압 크기에 따른 Feed-forward 구조를 통하여 동작 주파수를 가변 하는 무선전력전송 시스템을 구현하고자 한다.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.39-43
• /
• 2008

The purpose of this study was to develop EOG system for collecting eye movement patterns to investigate visual function and position and the level of balancing. This small and partable wireless EOG system was enabled to collect stable signals without hindering any kind of sports movement. This system was consist of four parts: amplifier, main process with wireless transmitter, receiver, and display. Three EOG electrodes were used and placed on right(+), left(-) sides of eyes, and between eyes as a reference. This system was possible to measure signals for relatively long duration but the degeneration of electrodes may magnify measurement errors when collecting time was getting longer. Thus, dry electrodes may be applied to the system when long term measurement is needed for future studies.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.449-454
• /
• 2012

According to the development of the ubiquitous computing technic today, the sensor base system is becoming a big issue in IT fields. This study is to develop a smart weather watching system which allows us to carry out temperature measuring without regard to location and altitude using the sensor devices. this system is composed of the wireless receiver module(PC base) and the wireless measuring module(ATmega2560 base).

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.405-408
• /
• 2004

본 논문에서는 FPGA와 마이크로프로세서를 이용하여 One Board화된 무선 콘트롤러 시스템의 기저대역부를 설계 하였다. 송신부에서는 컴퓨터와 연결된 마이크로프로세서부에서 컴퓨터를 통해 입력된 데이터를 병렬로 FPGA부로 전송하여 PN_code를 이용한 대역확산 거쳐 전송하고, 수신부에서는 대역역확산를 사용하여 데이터를 다시 수신측 마이크로프로세서를 통해 확인하였다. FPGA 설계는 Xilinx사의 FPGA 디자인 툴인 Xilinx Foundation3.1을 사용하였으며, FPGA configuration을 위한 타이밍 시뮬레이션을 수행하였고. Xilinx사의 SPARTAN2 2S100PQ208칩에 downloading 한 후 Agilent사의 1681A logic analyzer를 사용하여 설계된 회로의 동작을 확인 하였다. 또한 데이터의 입출력을 CPU부를 통해 컴퓨터에서 모니터링 할 수 있도록 설계하였다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.316-317
• /
• 2017

본 논문에서는 새로운 자기 공진형 무선 전력 전송 시스템을 제안한다. 송신부 2개를 배치하여 기존의 1 대 1 자기 공진보다 더욱 넓은 범위를 확보하여 실용성을 높이고자 한다. 동일한 송신부 2개를 배치하여 자기장의 세기를 높임으로써 수신부에 전송되는 전력의 크기 및 거리를 증대시킬 수 있다. 또한, 송 수신코일의 위치에 따라 서로 다른 출력 전력을 위상 제어를 통하여 다양한 범위의 일정한 전력을 제어할 수 있다. 이때 위상천이를 하지 않을 시에 고정된 입력 전류가 흐르게 된다. 하지만 위상천이, 즉 2개의 송신코일에서 전달하는 전류 조절을 시도함으로써 수신 측으로 전달하여 일정한 전력을 얻을 수 있었다. 실험을 통해, 기존의 방식보다 높은 성능을 가짐을 확인하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.203-211
• /
• 2015

The implanted telemetry system provides the monitoring of species while they move within their cages. Species monitored include mice, rats, rabbits, dogs, pigs, primates, sheep, horses, cattle, and others. A miniature transmitter implanted in each animal measures one or more parameters. Parameters measured include arterial pressure, intra-pleural pressure, left ventricular pressure, intra-ocular pressure, bladder pressure, ECG, EMG, EEG, EOG, temperature, activity, and other parameters and transmits the data via radio frequency signals to a nearby receiver. Every conventional dedicated transmitter contains one or more sensors, cpu and battery. Due to the expected life of battery, the measuring time is limited. To overcome these problems, electromagnetic inductive coupling based wireless power transmission technology using multiple transmit coils were proposed. Each coil having different active area are driven by the coil driver. In this research, parallel resonance based coil driver was proposed. In addition, the device to detect where the receiver is positioned was proposed. From the experiments we show how to determine the driving condition of coil driver.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.251-254
• /
• 2018

Research about IoT system that utilizes variation of wireless received signal according to the changing of the surrounding environment are actively being studied. In this paper, firstly we proved that the received signal strength changes according to the ambient temperature variation. Then, we proposed the fire detection scheme by using received signal strength variation when the signal exchange between fixed transmitter and receiver periodically. The proposed scheme consists of the received signal strength change detection unit and the internal receiver temperature detection unit which prevents misunderstanding the received signal strength variation by the changing of wireless channel environment as outbreak of fire. The proposed scheme has the advantage of being able to support the existing receiver through software upgrade without additional device.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.566-572
• /
• 2020

In a wireless power transmitter, the characteristics and effects of wireless power transmission between two induction coils are investigated, and a power converter circuit and a battery charger/discharger circuit using wireless power transmission technology are proposed. The advantage of wireless power transmitters and wireless chargers is that, instead of the existing plug-in-mounted wired charger (OBC; on-board charger), the user can wirelessly charge the battery without connecting the power source when charging power to the battery. There is. In addition, the advantage of wireless charging can bring about an energy efficiency improvement effect by using the secondary side rectifier circuit and the receiving coil, but the large-capacity long-distance wireless charging method has a limitation on the transmission distance, so many studies are currently being conducted. The purpose of the study is to study the transmitter circuit and receiver circuit of a wireless power transmission device using a primary coil, a secondary coil, and a half bridge series resonance converter, which can transmit power of a non-contact type power transmitter. As a result, a new topology was applied to improve the power transmission distance of the wireless charging system, and through an experiment according to each distance, the maximum efficiency (95.8%) was confirmed at an output of 3 kW at an 8 cm transmission distance.