• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.607-613
• /
• 2004

The future wireless communication systems will use spatial multiplexing with Multiple Input Multiple Output(MIMO) system to take advantage of high spectral efficiencies. In such systems it will be desirable to select a sub-set of available transmit or receive antennas to reduce cost and complexity. In this paper we propose a novel transmit antenna selection schemes for MIMO systems which is suitable for multipath environment. The proposed transmit antenna selection schemes offer better BER performance than that of MIMO systems without antenna selection and with traditionally proposed antenna selection schemes.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.85-91
• /
• 2017

This paper concerns the design of a matching module system enabling the RF signal to be harmonized between the new base stations (RRH) and the repeater in the same frequency band of the asynchronous transfer network. This matching system controls the RF Gain Control of the module while monitoring the quality of the quality. Additionally, the RF environment has been adapted accordingly to adjust the RF Gain Control to match the receiver characteristics of the relay. As a result of this study, we improved the quality of the interface between the new base stations and existing relays.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2005

Multicarrier code division multiple access(MC-CDMA) Is a scheme that combines multicarrier modulation with CDMA. It offers robustness to frequency selective fading and can support higher rate data transmission with higher spectral efficiency. The objective of this article to proposed a new asynchronous ME-CDMA system to implement multiple data rate communications. It can be accomplished by changing the number of parallel branch(.p). For the analysis of average BER performance, numerical method and computer simulation were used. After MAI power of received signal calculated, the average BER can be acriuired using Gaussian approximation to MAI. We also compare the system performance with that of a single rate MC-CDMA system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.305-308
• /
• 2014

AIS(Automatic Identification System) is a radionavigation equipment for exchanging safety related information between ships as well as ship and shore station, introduced by SOLAS convention and widely used especially in vessel traffic service. The dynamic data of AIS is transmitted at intervals of 2 second to 3 minutes depending on ship's navigational status and speed. However, so often times it happens that some AIS data can not be received due to increasing AIS traffic and it's time slot confliction. In this paper, a revised reporting intervals of AIS dynamic data is proposed in order to decrease AIS data link load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7B
• /
• pp.469-480
• /
• 2005

This paper presents new multimedia transmission and synchronization scheme for parallel server in wireless environment. The proposed scheme is developed for the parallel sewer that stores MPEG-4 data according to VOP (video object plane) types, i.e., I-, p-, and B-VOP. The goal of our research is to develop the enhanced multimedia transmission scheme that copes with load unbalancing, congestion, and jitter. Thus, we consider three issues; the data striping, the priority queuing, and the multimedia synchronization. First, we develop a parallel server architecture in which each server separately stores video data that is striped by the MPEG-4 VOP types.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.1022-1029
• /
• 2009

What Ubiquitous means "being or existing anywhere, anytime"in Latin, which is, in other words, the users are able to access the network no matter where they are, what kind of network or computer terminals they use. This paper focuses on the implementation of hardware system. The first part of the sytem is the sensor node which transmits the sensor data from node to ARM11 platform through the Zigbee network wirelessly. The other part of the system is the ARM11 platform which receives and displays the sensor data. ARM11 platform is sink node. The ARM11 platform is based on ARM11 architecture and ported with Linux OS. Qtopia is used as Window Manager in order to make applications. The highly efficient ARM11 processor, S3C6400 MPC is the main part of the ARM11 platform.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1252-1258
• /
• 1999

This paper describes a COMS IF transceiver IC for 10-MHz bandwidth wireless local loops. It interfaces between the RF section and the digital MODEM section and performs the IF-to-baseband (Rx) and baseband-to-IF (Tx) frequency conversions. The chip incorporates variable gain amplifiers, phase-locked loops, low pass filters, analog-to-digital and digital-to-analog converters. It has been implemented in a 0.6 -${\mu}{\textrm}{m}$ 2-poly 3-metal CMOS process. The phase-locked loops include voltage-controlled oscillators, dividers, phase detectors, and charge pumps on chip. The only external complonents are the filter and the varactor-tuned LC tank circuit. The chip size is 4 mm $\times$ 4 mm and the total supply current is about 57 mA at 3.3 V.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.745-752
• /
• 2005

In this paper we propose and implement a digital part of a receiver system for identifying a moving object and its tracking position in wireless environment. We assumed UWB(Ultra Wide Band)-based communication system for target application and used serial communication method(RS-232). The proposed digital receiver consists of RS-232-type1/RS-232-type2 for input and output of serial communication, ID Detector for detecting IDs, and PISO&Buffer circuit to buffer input signals for appropriate operation of ID Detector. We implemented the digital receiver with minimal hardware(H/W) resource according to target application of UWB-based communication system. So it correlates input patterns with pre-stored patterns though repeated detecting method for multiple IDs. Since it has reference panerns in the Ve-stored form, it can detect various IDs instantly. Also we can program content and size of reference patterns considering compatibility with other systems .The implemented H/W was mapped into XC2S100PQ208-5 FPGA of Xilinx, occupied 727($30\%$) cells, and stably operated in the clock frequency of 75MHz(13.341ns).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.214-217
• /
• 2001

This paper presents an implementation methodology of common Rf- integrated PCS base station system which, is capable of providing PCS services for 3 PCS carriers concurrently and wireless system performance evaluation data is shown. We have built up a common PCS base station system using a commonization module, which is consisted of a multi-channel combiner, duplexer, LNA, power divider, feeder line, and a common set of antennas. It was shown that the performance of the system within the total 30MHz PCS frequency range is uniformly acceptable and measured signal quality and coverage are equivalent to that of the individual PCS base station. It is expected that PCS carriers are able to save a huge amount of installation and maintenance expenses by installing and sharing this base station system. This paper forms a groundwork for deploying efficient and economical IMT-2000 network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.422-429
• /
• 2022

In this paper, the intermediate frequency transmission signal level between the network system-based baseband and RF unit consisting of multi-channel airborne relay devices and a lot of mission devices, which are currently undergoing technology development tasks, is kept constant at the reference signal level. Considering the other party's receiving input range, despite changes in the short-range long-range wireless communication environment, it presents a multi-link protection and MLP-A algorithm that allows signals to be transmitted stably and reliably through signal detection automatic gain control, and experiments and analysis considering short-distance and long-distance wireless environments were performed by designing, manufacturing, and implementing RF units to which MLP-A algorithms were applied, and applying distance calculation equations to the configuration of multiple air movements and verification networks. Through this, it was confirmed that a stable and reliable RF communication system can be operated.