• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.121-133
• /
• 2013

Defect-free transfer service on the Next-generation wireless network extensive roaming mobile node (MN) to provide efficient mobility management has become very important. MIPv6(Mobility IPv6) is one of mobility management scheme proposed by IETF(Internet Engineering Task Force), and IPv6-based mobility management techniques have been developed in various forms. One of each management techniques, IPv6-based mobility management techniques for PMIPv6 (MIPv6) system to improve the performance of a variety of F-PMIPv6 (Fast Handover for Proxy MIPv6) is proposed. However, the F-PMIPv6 is cannot be excellent than PMIPv6 in all scenarios. Therefor, to select a proper mobility management scheme between PMIPv6 and F-PMIPv6 becomes an interesting issue, for its potenrials in enhancing the capacity and scalability of the system. In this paper, we develop an analytical model to analyze the applicability of PMIPv6 and F-PMIPv6. Based on this model, we design an Secure Smart Mobility Support(SSM) scheme that selects the better alternative between PMIPv6 and F-PMIPv6 for a user according to its changing mobility and service characteristics. When F-PMIPv6 is adopted, SSM chooses the best mobility anchor point and regional size to optimize the system performance. Numerical results illustrate the impact of some key parameters on the applicability of PMIPv6 and F-PMIPv6. Finally, SSM has proven even better result than PMIPv6 and F-PMIPv6.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.35-40
• /
• 2011

In this paper, we compare and analyze data aggregation methods based on event area in wireless sensor networks. Data aggregation methods consist of two methods: the direct transmission method and the aggregation node method. The direct aggregation method has some problems that are data redundancy and increasing network traffic as all nodes transmit own data to neighbor nodes regardless of same data. On the other hand the aggregation node method which aggregate neighbor's data can prevent the data redundancy and reduce the data. This method is based on location of nodes. This means that the aggregation node can be selected the nearest node from a sink or the centered node of event area. So, we describe the benefits of data aggregation methods that make up for the weak points of direct data dissemination of sensor nodes. We measure energy consumption of the existing ways on data aggregation selection by increasing event area. To achieve this, we calculated the distance between an event node and the aggregation node and the distance between the aggregation node and a sink node. And we defined the equations for distance. Using these equations with energy model for sensor networks, we could find the energy consumption of each method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.164-171
• /
• 2006

Recently Digital multimedia broadcasting (DMB) has been available as a commercial service. The users sometimes have difficulty in finding their preferred multimedia contents and need to spend a lot of searching time finding them. They are even very likely to miss their preferred contents while searching for them. In order to solve the problem, we need a method for recommendation users preferred only minimum information. We propose an algorithm and a system for recommending users' preferred contents using preference transition probability from user's usage history. The system includes four agents: a client manager agent, a monitoring agent, a learning agent, and a recommendation agent. The client manager agent interacts and coordinates with the other modules, the monitoring agent gathers usage data for analyzing the user's preference of the contents, the learning agent cleans the gathered usage data and modeling with state transition matrix over time, and the recommendation agent recommends the user's preferred contents by analyzing the cleaned usage data. In the recommendation agent, we developed the recommendation algorithm using a user's preference transition probability for the contents. The prototype of the proposed system is designed and implemented on the WIPI(Wireless Internet Platform for Interoperability). The experimental results show that the recommendation algorithm using a user's preference transition probability can provide better performances than a conventional method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.77-83
• /
• 2019

With the increase in population, the number of such senior citizens is increasing day by day. These senior citizens have a variety of care needs, but there are not enough health workers to look after them. Ambient Assisted Living (AAL) aims at ensuring the safety and health quality of the older adults and extending the number of years the senior citizens can live independently in an environment of their own preference. AAL provides a system comprising of smart devices, medical sensors, wireless networks, computer and software applications for healthcare monitoring. AAL can be used for various purposes like preventing, curing, and improving wellness and health conditions of older adults. While information security and privacy are critical to providing assurance that users of AAL systems are protected, few studies take into account this feature. In this paper, we propose a secure and lightweight authentication scheme for the AAL systems. The proposed authentication scheme not only supports several important security requirements needed by the AAL systems, but can also withstand various types of attacks. Also, the security analysis results are presented to show the proposed authentication scheme is more secure and efficient rather than existing authentication schemes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.139-145
• /
• 2024

This paper presents the design of a voltage controlled oscillator (VCO) which is one of the key building blocks in modern wireless communication systems with small VCO gain (K_vco) variation. To compensate conventional large K_vco variation, a series varactor bank has been added to the conventional LC-tank with parallel capacitor bank array. And also, in order to achieve excellent phase noise performance while maintaining wide tuning range, a mixed coarse/fine tuning scheme(series varactor array and parallel capacitor array) is chosen. The switched varactor array bank is controlled by the same digital code for switched capacitor array without additional digital circuits. For use at a low voltage of 1.2V, the proposed current reference circuit in this paper used a current reference circuit for safety with the common gate removed more safely. Implemented in a TSMC 0.13㎛ CMOS RF technology, the proposed VCO can be tuned from 4.4GH to 5.3GHz with the K_vco (VCO gain ) variation of less than 9.6%. While consuming 3.1mA from a 1.2V supply, the VCO has -120dBc/Hz phase noise at 1MHz offset from the carrier of the 5.3 GHz.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.1-11
• /
• 2010

Since January 2009, Seoul Metro Government(SMG) is operating own Network RTK Systems connecting four(4) GNSS Reference Stations which are installed inside Seoul Metro City area. SMG is currently providing VRS data service via wireless internet for Network-RTK and RINEX data observed from GNSS Reference Stations. This paper will discuss utilization of data available from SMG Network-RTK System for various applications, and present the test results on practicalities of Virtual RINEX data. For the utilization of data available from SMG Network- RTK system, 1)NTRIP data delivery of GNSS realtime observables streaming and converting to RINEX at receiving side, 2) monitoring deformation of bulky structures using GNSS observation were discussed. In addition to those discussion, 3) broadcasting VRS correction data for job site via radio modem after acquiring such correction data on-line using NTRIP based GNSS Internet Radio from SMG Network-RTK System were introduced. For the test results on practicalities of Virtual RINEX data, 1) the post-processing results of the GNSS observation data on a certain point with GNSS Reference Station data have been compared to the post-processing results of Virtual RINEX data on the same point generated from SMG Network-RTK System, and 2) VRS RTK positioning results for a certain point and post-processing results of Virtual RINEX data for the point were compared. The results showed only a few mm difference, and the high possibility for using Virtual RINEX data for post-processing applications.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.679-684
• /
• 2005

There are a few representative wireless network access technologies used widely. WWAN is celluar based telecommunication networks supporting high mobility, WLAN ensures high data rate within hotspot coverage, and WDMB support both data and broadcasting services correspondingly. However, these technologies include some limitations especially on the mobility, data rate, transmission direction, and so on. In order to overvome these limitations, there are various studies have been proposed in terms of 'Vortical Handoff' that offers seamless connectivity by switching active connection to the appropriate interface which installed in the mobile devices. In this paper, we propose the interface selection algorithm and network architecture to maximize the life time of entire system by minimizing the unnecessary energy consumption of another interfaces such as WLAN, WDMB that are taken in the user equipment. In addition, by using the results of analyzing multiple types of traffic and managing user buffer as a metric for vertical handoff, we show that the energy efficiency of our scheme is $75\%$ and $34\%$ than typical WLAN for WDMB and WLAN preferred schemes, correspondingly.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.691-700
• /
• 2003

Due to the fast development of wire&wireless internet and computer hardware, more and more internet services are being developed, such as Internet broadcast, VoD (Video On Demand), etc. So QoS (Qualify of Service) is essentially needed to guarantee the quality of these services. Traditional Internet is Best-Effort service in which all packets are transported in FIFO (First In First Out) style. However, FIFO is not suitable to guarantee the quality of some services, so more research in QoS router and QoS protocol are needed. Researched QoS router and protocol are high cost and inefficient because the existing infra is not used. To solve this problem, a new QoS control method, named Network Adaptive QoS, is introduced and applied to client/server-based streaming systems. Based on network bandwidth monitoring mechanism, network adaptive QoS control method can be used in wire&wireless networks to support QoS in real-time streaming system. In order to reduce application cost, the existing streaming service is used in NAQoS. A new module is integrated into the existing server and client. So the router and network line are not changed. By simulation in heavy traffic network conditions, we proved that stream cannot be seamless without network adaptive QoS method.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.171-183
• /
• 1995

이 논문은 특정 기기산업의 기술적 구조와 현황의 분석 및 파악을 위한 제 품.기술 관련도라는 새로운 개념을 제시한다. 제품.기술 관련도란 분석대상산 업의 주요 제품들을 도출하고 각각의 제품에 관련된 기술들을 부품기술을 중심으로 파악하여 매트릭스의 형태로 도시한 것을 의미한다. 제품. 기술 관 련도상의 제품에 대해서는 전문가의 의견에 의해 측정된 기술수준과 주된 획득방법(국산화율)을 파악한다. 한편, 제품에 관련되는 기술은 기본적인 기능을 발휘하는 제품의 생산에 소요되는 기본기술과 제품의 성능향상을 위하여 필요한 성능관련기술 등으로 구분하여 분석된다. 이러한 제품.기술 관련도는 국내 기기산업의 각 분야별 기술수준, 부품군의 기술수준 등을 도출하고 상호관련성을 파악하는데 유용한 방법으로 활용될수 있다. 특히 제품군과 부품군간의 관계 도출, 기술수준 혹은 구산화율이 낮은 제품에 관련된 부품 및 기술의 파악, 국내의 기술수준이 낮은 부품에 관련되는 제품 및 제품군, 제품의 성능이 향상에 관련된 기술등의 파악이 용이하다. 본 논문에서는 제품.기술 관련도를 한국의 정보통신기기산업에 시험적으로 적용하여 정보통신 기기분야의 제품 및 기술 구조, 그리고 경쟁력을 분석하여 보았다. 국내 정보통신기기산업의 전체적인 기술수준은 자체적으로 기술을 보유하고 있으나 성능면에서 매우 미약한 소화 및 모방 단계의 수준이라고 해석할수 있다. 한편 부품기술은 아직도 소화및 모방단계에 머무르고 있으며, 개별소자와 수동부품의 기술수준이 매우 낮게 나타났다. 분야별로 볼 때 무선통신기기, 방송기기, 정보기기의 순으로 기술수준이 낮으며, 무선통신기기분야이 발전을 위해서는 고주파 부품의 기술 발전이 선행되어야 할것으로 보인다.라 제시된 외주위탁 전략과 현재의 외주위 탁 전략이 일치할 때 정보 시스템에 대한 사용자 만족도가 보다 높은 것으 로 나타났다. 할 수 있는 효율적인 distributed system를 개발하는 것을 제시하였다. 본 논문은 데이타베이스론의 입장에서 아직 정립되어 있지 않은 분산 환경하에서의 관계형 데이타베이스의 데이타관리의 분류체계를 나름대로 정립하였다는데 그 의의가 있다. 또한 이것의 응용은 현재 분산데이타베이스 구축에 있어 나타나는 기술적인 문제점들을 어느정도 보완할 수 있다는 점에서 그 중요성이 있다.ence of a small(IxEpc),hot(Tex> SOK) core which contains two tempegatlue peaks at -15" east and north of MDS. The column density of HCaN is (1-3):n1014cm-2. Column density at distant position from MD5 is larger than that in the (:entral region. We have deduced that this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율

• Journal of the Korean Geographical Society
• /
• v.48 no.2
• /
• pp.259-271
• /
• 2013

This paper addresses the efficient facility placements to adopt a super WiFi network, taking significant considerations as the next generation 'information highway'. Since the super WiFi has a wider geographic coverage by utilizing the white spaces of TV broadcasting which are empty and available frequencies for the wireless communications, it would play an important role in releasing digital divide of the internet access for low populated or mountainous areas. The purpose of this paper is to explore systematic and efficient spatial plans for the super WiFi. For doing this, we applied optimal location covering models to Gurye-gun, Jeonlanamdo. From the application, we presented optimal locations for super WiFi facilities and significant analytical results, such as the tradeoff between the number of facilities and coverage and marginal coverage for establishing super WiFi network. The results of this research would be usefully utilized for decision makers who wish to adopt a super WiFi, to extend wireless networks in a city or build a regional infrastructure of wireless facilities.