• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.133-138
• /
• 2011

In IP-based wireless sensor networks (WSNs), it might be necessary to distribute application updates to the sensor nodes in order to fix bugs or add new functionality. However, physical access to nodes is in many cases extremely limited following deployment. Therefore, network reprogramming protocols have recently emerged as a way to distribute application updates without requiring physical access to sensor nodes. In order to solve the network reprogramming problem over the air interface, this thesis presents a new scheme for new update code propagation using fragmentation scheme and network coding. The proposed code propagation method roughly shows reduced performance improvement in terms of the number of data exchange compared with the previously proposed pipelining scheme. Further, It is shows enhanced reliability for update code propagation and reduced overhead in terms of the number of data exchange. As a result, we can efficiently perform the software update from the viewpoint of speed, energy, and network congestion when the proposed code propagation system is applied. In addition, the proposed system solves overhearing problems of network coding such as the loss of original messages and decoding error using the predefined message. Therefore, our system allows a software update system to exchange reliable data in wireless sensor networks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.437-446
• /
• 2017

70 percent of Korea's territory is covered with mountains, whose difficult conditions can cause damage to facilities. Recently, the demand for facilities related to outdoor activities including monorails has been on the rise, and such facilities are much more likely to become damaged. For this reason, a monitoring system applying IoT to mountainous areas was developed and its applicability is evaluated in this study. The current status of the existing mountainous facilities and monitoring systems were reviewed, and the current wired monitoring technology was analyzed. A scenario for IoT-based monitoring was developed, and then sensor nodes were developed, which include an RF-communication module and interface, power-supply and solar-cell. A testbed was set up at K University. The same data was collected by the wireless system as had been collected by the wired one. The study findings are as follows. Firstly, by using the wireless system, it is estimated that the construction duration can be reduced by about 25 percent, while the construction costs can be reduced by about 3~52 percent. Secondly, the safety of the construction workers can be improved by making the working conditions less dangerous, such as by eliminating the need to transport cables.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.669-672
• /
• 2015

Recent Internet of Things (IoT, Internet of Things) that can be applied to various fields as the development of technology has been developed a lot of service and has been developed with the service also for crop management. To manage the essential elements of soil moisture in the crop growth but existing a direct person measuring the fluid point to carry the measuring instrument, if you take advantage of the WPAN (Wireless Personal Area Network) in this paper to manage sensor data, a fixed 3 points (30, 60, 90 cm) and can be managed can be scientifically analyzed the state of growth of the crop. Open field environment is utilized as it is less disturbance of the interference and the frequency of the radio frequency signal of the structure provides a relatively comfortable environment. Therefore, WPAN building and data transmission scheme of the minimum cost is to be developed. In addition, the operation to enter low power mode, the algorithm is necessary because a lot of restrictions on the power supply applied to the sensor nodes and the gateway is constructed in the open field. In the experiment, verifying the effectiveness by using a network configuration of each of the sensor nodes and the gateway, and provides a method for time synchronization of the operation and a low power mode. The study protocol for the RF communication with the LoRa and to enhance communication efficiency is needed in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.51-56
• /
• 2016

In this paper, we propose an Arduino-based plant monitoring system. The proposed system is based on the Arduino platform, using an environmental sensor and a pressure sensor for measuring temperature, humidity and illuminance in order to monitor the state of the environment and the facilities of the plant. Monitoring data are transmitted to a ZigBee coordinator connected to a server through a radio frequency transceiver. When using a pressure sensor and the environment sensor data stored on the host server, checking the pressure in the environment of the plant and equipment is intended to report any alarm status to the administrator. Using a grid line-based key distribution scheme, the authentication node dynamically generates a data key to protect the monitoring information. Applying a ZigBee wireless sensor network does not require additional wiring for the actual implementation of a plant monitoring system. Possible working-environment monitoring of an efficient plant can help analyze the cause of any failure by backtracking the working environment when a failure occurs. In addition, it is easy to expand or add a sensor function using the Arduino platform and an expansion board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1708-1721
• /
• 2011

Recent outbreak of cattle diseases such as foot-and-mouth disease(FMD) requires constant monitoring of burial sites of mass cull of cattles. However, current monitoring system takes environmental samples from burial sites with period of between one and two weeks, which makes it impossible for non-stop management of hazardous bio-waste. Therefore, in this study, we suggest an improved real-time environmental monitoring system for such bio-hazardous sites based on wireless sensor networks, which makes constant surveillance of the FMD burial sites possible. The system consists mainly several wireless environmental monitoring sensors(i.e dust, Co2, VOC, NH3, H2S, temperature, humidity) nodes and GPS location tracking nodes. Through analysis of the relayed of the environmental monitoring data via gateway, the system makes it possible for constant monitoring and quick response for emergency situation of the burial sites. In order to test the effectiveness of the system, we have installed a set of sensor to gas outlets of the burial sites, then collected and analyzed measured bio-sensing data. We have conducted simulated emergency test runs and was able to detect and monitor the foul smell constantly. With our study, we confirm that the preventive measures and quick response of bio environmental accident are possible with the help of a real-time environmental monitoring system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.114-123
• /
• 2007

As a promising technology that enables ubiquitous computing and will lead the information technology industries of the next generation, the new field of sensor networks is one of the most active research topics today. From now on, each node, the network formation, and even the sensor network itself will interact with the generic network and evolve dynamically according to environmental changes, in a process of continual creation and extinction. In this paper, we propose a address-Internetworking scheme for interactive networking between a sensor network and the Internet based on the TCP port-numbers. The proposed scheme enables internetworking between a sensor network address scheme based on Zigbee and the Internet address scheme based on the Internet Protocol version 6 (IPv6). We implement the proposed address-Internetworking scheme using Berkeley TinyOS, Mica Motes, and IP. In addition we verify the proposed scheme by an interconnection experiment, which involves wireless sensor networks and the Internet, using IPv4/IPv6.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.133-140
• /
• 2007

Currently, as the requirement for high quality Internet access from anywhere at anytime is consistently increasing, the interconnection of pure ad hoc networks to fixed IP networks becomes increasingly important. Such integrated network, referred to as hybrid ad hoc networks, can be extended to many applications, including Sensor Networks, Home Networks, Telematics, and so on. We focus on some data communication problems of hybrid ad hoc networks, such as broadcasting and routing. In particular. power failure of mobile terminals is the most important factor since it affects the overall network lifetime. We propose an energy-efficient routing protocol based on clustering for hybrid ad hoc networks. By applying the index-based data broadcasting and selective tuning methods, the infra system performs the major operations related to clustering and routing on behalf of ad hoc nodes. The proposed scheme reduces power consumption as well as the cost of path discovery and maintenance, and the delay required to configure the route.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1729-1735
• /
• 2009

The hierarchical routing could cause a lot of energy consumption for transferring data by assigning hierarchical routes although actual nodes could be located in physically near spots. Also, when Node Failure or Association Error occurs, the Hierarchical routing could waste more energy to deliver the control messages. This paper evaluate performance of SHP(Shortest Hop Routing) algorithm that suggests short-cut routing algorithm using NL(Neighbor List) and Redirect_ACK message to improve problem of hierarchical routing algorithm. We do a computer simulation by the size of network, deployment of sensor nodes, sink position and POS. As a result of simulation, SHP has better performance than Zigbee Hierarchical routing and HiLow.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.551-558
• /
• 2009

Most of clustering schemes focusing on the energy efficiency have only a cluster head in each cluster, thus the energy consumption of cluster head in a cluster can rapidly increase. To reduce the energy consumption, recently, the dual-layered clustering which is separated a cluster ranges into two parts, i.e., data aggregation layer and data transmission layer, based on a sensor equipped with geographical positioning system (GPS), was proposed. However, the logical regions existing within the dual-layered clustering range can not distinguish efficiently. This scheme leads to many messages collision and transmission delay among member nodes. In this paper, to solve these problems, we propose a separated dual-layered routing scheme using the position information and the cluster radius. Proposed scheme clearly distinguish the dual-layered clustering range and gets the balanced number of member nodes in each cluster. Therefore, the proposed routing scheme could prolong the overall network life time about 10% compared to the previous two layered clustering scheme and LEACH.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5865-5872
• /
• 2011

Multi-hop communication in clustering system is the technique that forms the cluster to aggregate the sensing data and transmit them to base station through midway cluster head. Cluster head around base station send more packet than that of far from base station. Because of this hot spot problem occurs and cluster head around base station increases energy consumption. In this paper, I propose a cluster group head selection using trajectory clustering technique(CHST). CHST select cluster head and group head using trajectory clustering technique and fitness function and it increases the energy efficiency. Hot spot problem can be solved by selection of cluster group with multi layer and balanced energy consumption using it's fitness function. I also show that proposed CHST is better than previous clustering method at the point of network energy efficiency.