• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.183-187
• /
• 2020

The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, have not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, In this paper, especially, research on the convergency design for total inspection machine is treated. is treated.

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.197-201
• /
• 2020

The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, did not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, research on design and manufacturing of JIG and Fixture for molybdenum pin manufacturing and inspection is treated.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.372-381
• /
• 1985

Oxo molybdenum (V) complexes of substituted 8-quinolinols were synthesized and characterized by means of the investigation of elemental analysis, infrared spectra, electron spectra, electric conductivity and mass spectrometry compared with oxo molybdenum (VI) complexes. Oxo molybdenum(V) complexes were nonelectrolyte and one strong band of stretching mode of molybdenum and terminal oxygen appeared approximately $940cm^{-1}$. Oxo molybdenum(VI) complexes gave two peaks corresponding molybdenum containing ions, a molecular ion (I) of a 2 : 1 (ligand : metal) chelate and a fragment ion (II) of a 1:1 chelate due to the loss of ligand radical from ion (I). Molybdenum(V) complexes were observed the fragment ion(II) of a 1 : 1 chelate partly. The electronic spectra corresponding to d-d transition and charge transfer transition were observed and interpreted.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.37-45
• /
• 2024

Molybdenum is used in various industries because of its high heat and corrosion resistance. It was selected as a critical mineral in Korea. However, there have been recent challenges in production because of the increased depth and decreased grade of molybdenum veins. Consequently, it is necessary to enhance the effectiveness of the molybdenum beneficiation process. In this study, a basic evaluation of beneficiation characteristics was conducted to enhance the effectiveness of the domestic molybdenum ore beneficiation process. The properties of the beneficiation process were assessed using mineralogical analysis, work index, and flotation kinetics. The results revealed that the allowable particle size of the molybdenum ore for liberation was ~100 ㎛. In addition, the work index was calculated to be 14.57 kWh/t. The operating conditions in the flotation units were achieved by determining the optimal flotation time for each process based on flotation kinetics. Finally, the characteristics of molybdenum ore beneficiation provided in this study can be utilized to diagnose the grinding and flotation processes of large-scale molybdenum beneficiation plants.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.44-49
• /
• 2018

$MoO{_4}^{2-}$ is the stable chemical species of Mo(VI) in alkaline solution. In the pH range of 2 to 6, condensation polymerization between $MoO{_4}^{2-}$ and hydrogen ion results in the formation of various polyanions of Mo(VI). Polycations of Mo(VI) begin to form when solution pH is less than 2. As the concentration of inorganic acid increases, polycations of Mo(VI) can react with the anion of the inorganic acid, resulting in the formation of heteranions of Mo(VI). The distribution of Mo(VI) species at pH < 6 depends on the concentration of Mo(V) and inorganic acid. In order to analyze the solvent extraction and ion exchange data on Mo(VI) from concentrated inorganic acid solution, it is necessary to elucidate the nature of Mo(VI) complexes.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.1
• /
• pp.52-57
• /
• 2001

옥천대의 탄질 흑색 점파암에 최대 1000 ppm까지 부화되어 있는 몰리브덴의 광물학적 존재형태를 밝히기 위하여 충청북도 괴산군 덕평지역 흑색점판암에 대하여 박편제작, X선회절분석, 중성자활성화학분석, 주사전자현미경관찰, 에너지분산 X선분석, 파장분산 X선분석 등을 실시하였다. 그결과 몰리브덴은 두께 $1~2\mu$m 정도의 극미립 엽상 휘수연석($MoS_2$)으로 존재함이 판명되었다. 휘수연석은 흔히나이트의 포획물로 산출된다. 탄질흑색 점판암에 우라늄 및 바다듐과 함께 다량의 몰리브덴이 함유되어 있음에도 과거의 연구에서 그 존재형태가 규명되지 않은원인은, 극미립 휘수연석이 불투명한 세립 탄질기질에 분산 분포하기 때문이다.

• Korean Journal of Crystallography
• /
• v.3 no.2
• /
• pp.85-97
• /
• 1992

EBFZM( Electron Beam Floating Zone Melting) 법을 이용하여 몰리브덴에서의 금속계 불순물과 침입형 불순물의 정련기구 및 단결정 성장기구를 연구하 였다. Fe, Cr, Co등의 금속계 불순물은 몰리브덴과의 평형증기압의 차이에 따른 불순물의 선택적 증발에 의하여 우수한 정련효과를 나타내며, 몰리브덴보다 응점이 높은 Ta, W는 잘 제거되지 않았다. 한편 대역 정제에 의한 정련효과는 미약함을 확인하였다. EBF ZM은 C,0,N등의 침입형 불순물의 정련에도 효과적 이었다. 본 연구의 모든 조건에서 몰리브덴은 단결정으로 성장하였으며 2차 재결정 epitaxy에 의한 단결 정 성장기구가 제시되었다. 몰리브덴 단결정 내의 전 위밀도는 strain-anneal법에 의한 단결정의 경우보다 높았으며,본 실험의 열처리 조건에서는 변화하지 않았다. The purification and single crystal growth mechanisms of molybdenum were analysed in EBFZM ( electron beam floating zone melting). Metallic impurities of Fe, Cr, Co were purified efficiently but Ta and W were not removed well in this study. It was due to a preferential evaporation of the elements caused by the difference in equillibrium vapor pressure between the elements and molybdenum. The pu- rification effect by zone refining was not significant. The EBFZM also refined the interstitial impurities of C, 0 and N, effectively. The single crystals of molybdenum were grown regardless of the experimental conditions and the secondary recrystallization epitaxy was surge sled as a growth mechanism. The dislocation density in single crystal was higher than that by strain-anneal method, and was not reduced by heat treatments.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.9-15
• /
• 1998

Recovery af molybdenum in spent desulfuriring catalyst of petrochemical industries was studied from MfGnatc solulion which is a resultant of firstly remvercd vanadium by wet processes. In order to separate and recover molybdenum from upper mentioned rafinatz solution containing several mctal ions, such as molybdenum (1,100 ppm), vanadium (150 ppm), aluminium (19 ppm), and nickel (33 ppm), either adsorption technique by chelate resin or solvent extr~ction by tertiary amine as extractant was applied. In case of adsorption method, palyamine type chelate resin showed the highest selectivily far molybdenum ion up lo 60 ddm' of ancentration aftcr eluting with 3.0 rnolld~n' of NH,OH. On the othcr hand. molybdenum ion wa cffectlvely cxtractcd in Ule whole ranges of equilibrilrm pR by solvent extraction method with 10 ~01%-alamine 336 which was pretreated with 2N-HCI

• Economic and Environmental Geology
• /
• v.44 no.2
• /
• pp.109-122
• /
• 2011

The major Mo deposits in South Korea were formed during the Jurassic Daebo orogeny, the Late Cretaceous and the Tertiary post-orogenic igneous activities, and are characterized by a variety of genetic types such as pegmatite, greisen, skarn, porphyry and vein types. The Jangsu mine is a pegmatite-style deposit which is genetically related to the Jurassic ilmenite-series two-mica granite with the Mo mineralization age of $159.6{\pm}4.5$ Ma. The Geumseong mine occurs as a skarn/porphyry-style deposit associated with highly fractionated granite. Its age of Mo mineralization within aplitic cupola is about 96.5~l07.5 Ma. The Yeonil mine is a porphyry-style deposit, and the Geumeum mine is a veinlet-style deposit along the fracture zone with their mineralization ages of $58.4{\pm}1.6$ and $54.4{\pm}1.2$ Ma, respectively. The contrasts in the style of Mo mineralization in Korea reflect the different environment of the related magmatism. The Jurassic mineralization, being related to deep-seated granitoids, occurs as a pegmatite-style deposit, whereas the Cretaceous one, being related to subvolcanic granitoids, occurs as skarn/porphyry/vein-type ore deposits. The Tertiary Mo mineralization has a close relationship with the igneous activities associated with the Tertiary basin formation along the east coast, Korean peninsular.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.126.2-126.2
• /
• 2015

대표적인 금속 칼코지나이드 2차원 물질인 이황화 몰리브덴($MoS_2$)의 대면적 합성을 위해 화학적 기상 증착 (Chemical Vapor Deposition) 방법을 이용하였다. 몰리브덴을 포함한 $Mo(CO)_6$ 전구체와 황이 포함된 $H_2S$ 가스를 적절한 비율로 반응시켰고, 증착 속도를 조절하여 한 층부터 다섯 층까지의 얇은 $MoS_2$ 박막을 제작할 수 있었다. $MoS_2$ 박막들이 층별로 균일 하게 증착 되었는지 확인하기 위해 라만 분광법을 이용 하였고, x-선 분광법을 통해 몰리브덴과 황의 정확한 정량비를 알 수 있었다. 뿐만 아니라, 우리는 두께 의존성을 갖는 이차원 물질인 $MoS_2$ 각 층마다 나타나는 전자 구조적 특성 분석을 위해 자외선 분광법, 역광전자 분광법, 전자 에너지 손실 분광법을 사용하였다. 그 결과, $MoS_2$ 박막의 두께 별 일함수, 가전자대 최대값, 전도대 최소값, 밴드갭의 변화를 관찰할 수 있었다. 이는 기존 계산 결과와 비교하여 잘 일치함을 알 수 있다.