• Journal of the Earthquake Engineering Society of Korea
• /
• 제15권5호
• /
• pp.1-10
• /
• 2011

This paper proposes an efficient method for selecting ground motions with the mean response spectrum matching a target spectrum. Since former studies reported that the shape and amplitude of the response spectra can be treated independently for selecting ground motions, this study first selects ground motions such that the shape of their mean response spectrum matches that of the target spectrum, then scales the ground motions. To select the ground motions best matching the shape of the target response spectrum, the standard deviation of the difference between the target response spectrum and the mean response spectrum of the selected ground motions needs to be minimized. Unlike the existing procedure, the scaling factor can be computed without iteration. Based on the selection results of 7 ground motions from a library of 40 ground motions, the proposed method is verified as an accurate and efficient method.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제5권2호
• /
• pp.103-111
• /
• 2001

본 연구에서는 능력스펙트럼법을 이용하여 성능목표를 만족하기 위하여 필요한 점성 감쇠기？ 양을 간단하고 직접적인 방법으로 산정하는 방법에 관하여 연구하였다. 먼저 능력스펙트럼법을 이용하여 구조물의 비탄성 응답을 구하고 구조물의응답과 목표변위의 차이를 이용하여 필요한 유효감쇠비를 구하였다. 그리고 이러한 유효감쇠비를 이용하여 필요한 점성감쇠기의 양을 선정하였다. 본 연구에서 제안한 방법의 타당성을 검증하기 위해 10층의 철골조 건물에 세 가지 유형의 층지진하중을 가하고 제안된 절차에 따라 필요한 감쇠기의 양을 구하였다. 해석결과에 따르면 제안된 방법에 의하여 설계된 점성 감쇠기를 해석 모델에 설치하고 시간이력 해석을 수행한 결과 최대응답은 목표변위와 잘 일치함을 발견하였다.

• Journal of Korean Society of Neurocognitive Rehabilitation
• /
• 제10권2호
• /
• pp.1-7
• /
• 2018

The study has compared normally developed children and children who were diagnosed as autism spectrum in goal management training them to observe the effect. The research was conducted to four normally developed children and four children who were diagnosed as autism spectrum, and all subjects were provided with identical goal management training. The children and the caregivers have selected desired objectives activity, and all three activities were followed by goal management training. Intervention periods were conducted ten times in total, two times a week for five weeks, and eight subjects in the two groups were trained one on one by the researcher. The training time was 40 minutes for every session. The descriptive statistics and frequency analysis were used as the statistical method, and the Mann-Whitney test, the nonparametric statistical analysis, was conducted to compare the difference between the two groups. Goal management training for two groups did not show a statistically significant difference in terms of the performance status of Canadian Occupational Performance Measure (p>.05). In the summary of Bruininks-Oseretsky Test of Motor Proficiency (2nd) which evaluates the motor skill, there was a statistically significant difference between the autism spectrum disorder group and normal group (p<.05). Additionally, the two groups showed a statistically significant difference in eye-hand coordination sub-test among Developmental Test of Visual Perception (2nd) which evaluates the visual perception performance (p<.05). The research has confirmed the applicability of goal management training to children with autism spectrum compared to the normally developed children, and it has confirmed the effectiveness of the training.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.628-631
• /
• 2008

For the remote sensing purpose, radar systems extract the target information, such as the magnitude of reflectivity and the velocity from the spectrum analysis of return echoes through the Doppler filter bank. This conventional spectrum estimation method, FFT(Fast fourier Transform) is widely used in most radar systems. However, the frequency resolution of return echoes can be seriously degraded in fast moving targets because of the short acquisition time. Since the high Doppler frequency resolution is important in the detection and tracking of fast moving targets, it can cause very unsatisfactory results. Therefore, in this paper, the parameter spectrum estimation method called AR(Autoregressive) spectrum estimation, is investigated to overcome these problems.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제7권4호
• /
• pp.63-69
• /
• 2003

In this study seismic design procedure for buckling-restrained braced frame systems was proposed using hysteretic energy spectrum and accumulated ductility spectrum constructed from single degree of freedom systems. The hysteretic energy spectra and accumulated ductility spectra corresponding to target ductility ratio were constructed first. The cross-sectional area of braces required to meet a given target displacement was obtained by equating the hysteretic energy demand to the accumulated plastic energy dissipated by braces. Twenty earthquake records were utilized to construct the spectra and to verify the validity of the design procedure. According to analysis results of three- and eight-story buckling-restrained braced frame structures designed using the proposed method, the mean values for the top story displacement correspond well with the given performance target displacements. Also, the inter-story drifts turned out to be relatively uniform over the structure height, which is desirable because uniform inter-story drifts indicate uniform damage distribution. Therefore if was concluded that the proposed energy-based method could be a reliable alternative to conventional strength-based design procedure for structures with buckling-restrained braces.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제5권1호
• /
• pp.45-52
• /
• 2001

에너지 소산장치가 설치된 건무의 비선형 시간이력해석은 복잡하고 많은 시간이 소모된다. 본 연구에서는 비선형 정적해석법인 능력 스펙트럼을 이용하여 구조물의 주어긴 거동 한계를 만족할 수 있는 감쇠기의 양을 산정하는 방법에 관하여 연구하였다. 먼저 능력스펙트럼법을 이용하여 건물의 비선형 정적응답을 구하고 건물의 응답과 목표변위의 차이를 이용하여 유효감쇠비를 구하고 이러한 유효 감쇠비를 이용하여 필용한 점성 감쇠기의 양을 구하였다. 본 연구에서는 단자 유도계에서 건물의 주기, 요구되는 탄성강도에 대한 항복강도의 비, 항복 후 강성비 등을 변수로 하여 연구를 수행하였다. 제안된 방법에 따라 설계된 점성 감쇠기를 설치한 예제 구조물의 시간이력 해석에 의한 최대 응답은 설계의 초기단계에서 사용한 목표변위와 잘 일치하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제13권1호
• /
• pp.9-14
• /
• 1999

One of the IIDSt difficult problems in a tri-band fluorescent lamp manufacture is to search a desired color by an adequate mixing of tri-color phosphors. When a light spectrum of a phosphor is slightly changw or distorted due to process variable or when another spectrum such as from Ar, Kr or a iDosphor of calcium halo-phosphate as a first layer exist, it is even rrnre difficult to search a desired color. In this work, a rapid awuaching rrethod to a desired light color was studied. 1bree single-color fluorescent lamps and three-color-mixed fluorescent lamps with different mixing ratios were prepared and the spectra of these lamps were measured, from which the rrercury and the argon spectra were eliminatffl to obtain the rrndifiw color coordinates. From this rrndifiw color coordinate, h.lIlHl ratios of green and blue to red were correlatffl with their weight ratios. This correlation was awliw to the industrial line for single and double layer coating and proven to be valuable as a desired color matching procWure in tri-color fluorescent lamp manufacture.acture.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제13권2호
• /
• pp.153-158
• /
• 2020

In this paper, we studied an algorithm for estimating a desired target by removing noise and interference in a wireless communication environment. When an information signal with a mixture noise and interference receive a receiver, noise and interference signals must be removed to accurately estimate a desired target. In order to divide the received signal region into two spatial, a power spectrum is obtained by analyzing a correlation matrix, covariance, eigen vector, and eigen value. The proposed spectrum is an algorithm that can remove noise and interference, and analyzes the existing algorithm and target estimation performance through simulation. As a result of simulation, the target estimation resolution of existing algorithm is more than 10°, but the resolution of the proposed algorithm is less than 10°. The proposed algorithm has improved the resolution of about 5° than the exiting algorithm. The proposed algorithm proved that the target estimation accuracy and resolution are superior to the existing algorithm.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제12권5호
• /
• pp.31-38
• /
• 2008

Recently the necessity of time history analyses is increasing for the seismic analyses of a structure, and the seismic design provisions of IBC2003, ASCE and KBC2005 require the use of a minimum of seven earthquake records for the time history analyses. Earthquake records for the time history analyses could be selected from the database of the field-measured earthquake records having similar site conditions with the designed site, or from simulated sites satisfying the design spectrum. However, in this study seven earthquake records were generated using 50 earthquake records, classified as records measured at the rock, in the database of the Pacific Earthquake Research Center (PEER). Seven earthquake records were first selected by the least squares fitting method comparing the scaling factored response spectra with the specified design spectrum, and a family of seven artificial time history earthquake records was ultimately generated by multiplying scaling factors, which were calculated by the least squares fitting method and the SRSS averaging method, to the corresponding selected earthquake records.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제15권2호
• /
• pp.329-339
• /
• 2002

This research presents a systematic design procedure for supplemental viscoelastic dampers required to satisfy the given performance objectives using capacity spectrum method. To obtain required damper size, the amount of supplemental damping was computed from effective damping minus equivalent damping and inherent damping of structure. In the case of viscoelastic damper, iterative procedure is required because of the inherent stiffness of the damper. To verify the design method proposed in this study, parametric studies were performed for single degree of freedom systems with design variables. The method was also applied to a 10-story steel framed structure and the earthquake responses were obtained. According to time history analysis result the controlled displacements turned out to be close to the target displacement regardless of the design parameters.