• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.75-85
• /
• 2004

The natural dyes from Gardenia jasminoides, Carthamus tinctorius L., Rhus javanica, Lithospermum erythrorhizon, Caesalpinia sappan L., and Castanea crenata were extracted under different pH in distilled water, As the pH in distilled water went from acid to alkali, the much deeper colors in the same color tone were generated from the individual plant species. Before dyeing, wood species were treated by different mordants including AI, Cu, Cr and Fe for color-fixing between wood and the natural dyes. Each mordant could develop independent color on the surface of the woods. The wood species dyed by the natural dyes created deep-tone colors according to higher pH and temperature of the dyeing solution, leading to deeper penetration of the dyes into the wood tissues. Finally through the computer modelling of natural-dyed wood furniture, it was confirmed that the colored furniture can adequately be compatible with the current interior spaces of diverse colors.

• The Korean Journal of Mycology
• /
• v.50 no.4
• /
• pp.291-300
• /
• 2022

In this study, the physical properties of the medium and changes in the wood chemical composition of the sawdust were investigated during the cultivation of oak mushroom sawdust bags, and the following results were obtained. After inoculation, the weight of the medium decreased during the incubation period. It is determined that this is not due to evaporation of moisture containing the medium or decomposition of sawdust, but to decomposition of rice bran, a low molecular substance added to the medium. It was confirmed that the moisture content of the medium was steadily increased during incubation, and it was estimated that the organic substrates such as rice brane in the medium was decomposed by mycelium, and water, one of the decomposition products of organic substrates, caused an increase in the moisture content of the medium. Along with the increase in the harvest of oak mushrooms, the proportion of organic substances such as holocellulose and lignin, the main components of the wood cell wall of sawdust, steadily decreased. In particular, the degradation characteristics of the wood cell wall component of shiitake, which is a white rot fungi, were confirmed by higher lignin reduction rate than that of holocellulose. On the other hand, ash, which is an inorganic material, increased with an increase in the number of mushroom harvests. The increase in the amount of ash in the medium may have been due to the decrease in the organic matter content such as holocellulose and lignin.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.1-27
• /
• 1997

This study was to survey the flora of resources vascular plants in the Experiment Forests of Kangwon National University. Resources vascular plants were composed of 98 families, 345 genera, 551 species, 2 subspecies, 88 varieties, 10 formae, and 2 hybrid, totaling 653 taxa. Among the investigated resources plants, Korean endemic plants and rare or endangered plants were distributed 20 taxa and 18 taxa, respectively. There were 27 taxa of Naturalized plants in this study area, which would have unpredictable influence on the natural ecosystem. The urbanized index(UI) of all over the investigated areas was about 12.4%. Useful resources plants were composed edible source(42.1%), medicinal source(33.8%), pasture source(28.8%), ornamental source(11.8%), timber source(5.2%), fiber source(1.4%), industrial source(1.1%). Vascular plants of unknown use were 140 taxa(21.4%).

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.358-373
• /
• 2013

In this study, both mild acid and alkali treatments with 1.0 wt% and 2.0 wt% of $H_2SO_4$ and NaOH solution were applied to evaluate the effects on chemical compositions of wood biomass. Yellow poplar (Liriodendron tulipifera L.) and larch (Larix kaempferi C.) were chosen due to major species planted in Korea. Chemical treatments of biomass were carried out by being soaked in either acid or alkali solution with 1:20 ratio for 72 hours at ambient temperature. Afterward, lignin, 5 major reduced sugars, ash contents and elemental composition were determined. To statistically understand the relationship between samples and chemical treatments, the Tukey test, simple linear regression model and ANOVA analysis were introduced using a statistical software R. As results from both wet chemistry and statistical analysis, yellow poplar was more affected on the lignin and xylose contents by acid treatments under these experimental conditions. Meanwhile, larch was more affected on the composition of galactose and lignin by alkali treatments. A series of results in this study would show that equivalent chemical treatment makes a change the chemical composition of each species.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.87-94
• /
• 2005

This study was carried out to investigate the effect of soil types and soil properties on wood preservative leaching. Radiata pine (Pinus radiata Don.) sapwood stakes, which had been treated with 2.0%(w/v) CCA, were leached for 12 weeks by a common laboratory method in four different soils and for 14 days by the AWPA standard leaching method in water. The physical and chemical properties of the four soils were determined, and the percent leaching of the individual component of CCA was correlated with the various soil properties. The data show that leaching of preservative chemicals from treated wood exposed to soil is influenced by the type of soil. The preservative leaching was greater when wood was exposed to water than when the wood was in contact with water-saturated soil. The greatest chromium, copper and arsenic leaching from CCA-treated stakes were observed in the sandy loam, loam, and sand, respectively, and the least amount of leaching of CCA components occurred in the silty loam. The leaching of preservative components from treated wood is extremely complex and appears to be influenced differently by the soil properties. The extent of copper leaching from CCA treated wood appears to be related to exchangeable Mg and sum of bases. There is a reasonably good relationship between chromium leaching and exchangeable Mg, and between arsenic leaching and exchangeable K, soil Ni, Mn, Fe, Cr, or Cu content. Since this study was conducted based on laboratory leaching method using small cross-sectional dimensions; thus, data obtained from this experiment should not be used to predict leaching characteristics from commercial-size wood used in real situation. Accordingly, further studies are necessary using outdoor ground-contact leaching.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.8-15
• /
• 2017

Most fire victims succumb to smoke inhalation, and fire smoke toxicity from interior materials is increasing with increased use of plastics. Large amounts of hazardous effects of smoke are related to deposition of smoke particles in respiratory tracts, and deposition characteristics are influenced by size distribution of particles. Thus, it is essential to know the size distribution of smoke particles from plastics for hazard analysis of fire smoke. In a recent study, it has been shown that size distributions of smoke particles from PP are different from wood in many aspects. In order to know whether other plastics show the same characteristics as PP, size distributions of smoke particles from four plastic materials (LDPE, PA66, PMMA, and PVC) were measured in real time under each fire type with various temperature and oxygen supply. In this study, smoke particles from different plastics were generated uniformly by using steady-state tube furnace method provided in ISO/TS 19700. Their size distributions were measured by using an electrical low pressure impactor (ELPI). Results of measurements showed that size distributions of smoke particles from these four plastic materials were similar to those from PP in many aspects. However, they were distinctively different from those of wood.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.108-117
• /
• 2007

This research was performed to investigate the feasibility of bamboo as a raw material for the manufacture of plywood. Wood veneer-bamboo zephyr composite boards (WBCB) were manufactured using keruing (Dipterocarpus sp.) veneers and hachiku bamboo (Phyllostacbys nigra var. henonis Stapf) using various adhesives, and the effect of the method and amount of resin spread on the mechanical properties of the composites were investigated. The WBCB manufactured using polymeric isocyanate (PMDI) showed the best mechanical properties, followed by phenol-formaldehyde resin (PF), phenol-melamine-formaldehyde resin, urea-melamine-formaldehyde resin, and urea-formaldehyde resin. However, considering the operation feasibility as well as mechanical properties, PF resin proved to be the appropriate adhesive for the practical purpose. As the amount of resin spread increased, the mechanical properties of 5-ply WBCB with 12 mm thicknesses manufactured using PF resin tended to increase, and more failure occurred at the interface between veneer and bamboo zephyr than at the interface among bamboo zephyrs. This result suggests that penetration of resin into bamboo zephyr could be the important factor. In this research, the appropriate amount of resin amount was $320g/m^2$. 5-ply WBCBs were manufactured using various methods of resin spread but the effect of the methods on the mechanical properties showed no little difference, which meant that the method of resin spread could be chosen considering the manufacturing conditions and operation feasibility.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.4
• /
• pp.47-71
• /
• 2009

The resource plants of northern region in Gapyeong-gun were investigated 7 times from Apr. 2007 to Oct. 2007. In the result of survey, the flora of this area, depend on voucher specimens, consist of 480 taxa totally; 94 families, 286 genera, 412 species, 4 subspecies, 52 varieties and 12 forms. The Resource plants in this area were categorized by their use into edible 177, pasturing 136, medicinal 124, stainable 69, ornamental 133, afforest 24, timber 10, fiber 6, industrial 2 taxa and unknown use plants 72, respectively. There were remarkable plants such as 14 taxa of Korean endemic plants, 85 taxa of specific plants which were designated by the Ministry of Environment, and 12 taxa of rare and endangered plants of Korea Forest Service. Furthermore, 22 taxa of naturalized plants 4.6% were also observed in this area and Urban Index (UI) was 8.2%. The vegetation status of investigated area was comparatively well conserved, but the degree of UI could be increased rapidly by the climbers, development of forest road. Therefore, the systems for conservation need to prepared for the effective management of forest, and the special plans need to control the number of climbers and visitors.

• Korean Journal of Plant Resources
• /
• v.25 no.5
• /
• pp.523-542
• /
• 2012

This study was carried out to clarify the regional folk plants in the southern inland area of Gyeonggi-do Province. According to the survey results, derived from 1,229 sheets of 90 residents at 35 places from 9 counties and cities between October 2009 and December 2010, the folk plants in the inland southern area of Gyeonggi-do consisted of a total of 259 taxa; 82 families, 200 genera, 221 species, 4 subspecies, 32 varieties, and 2 forma. The classification of the plants by its usage was; 214 as edible, 119 as medicinal, 34 as ornamental, 18 as timber, 12 as dye, 5 as oil, 3 as spice, 2 as fiber, 2 as aroma, and 22 as others uses. So, the edible and medicinal uses are higher than other uses. The most useful part was the leaf, followed by fruit, stem, root, and flower. The collection season was focused on spring and summer, because the leaf was mainly collected in an edible condition during those seasons. Traditional knowledge of folk plants was mostly passed down orally. The consistency comparison between the standard common name and the local name was the highest in the people in 50s and the lowest in those in 80s.

• Journal of agriculture & life science
• /
• v.44 no.5
• /
• pp.1-8
• /
• 2010

In this study, eco-friendly hybrid composite boards were manufactured from green tea and wood fibers for application as interior materials with various functionalities of green tea and strong strength properties of wood fibers. In this relation, the effect of green tea content on the static bending strength performances of these green tea and wood fibers composite boards were investigated. Static bending strengths of hybrid composite boards were lower than those of control boards and decreased with the increase of green tea content. Also, the strength performances appeared to be somewhat different by resin type used for board manufacture. The hybrid composite boards manufactured from $E_1$ grade urea resin adhesive, which has higher molar ratio of formaldehyde to urea than that of $E_0$ grade one, were 1.08~1.53 times higher in bending modulus of elasticity (MOE) and 1.19~1.82 higher in modulus of rupture (MOR) than that manufactured from $E_0$ grade. And, the differences of MOE and MOR between hybrid composite boards manufactured from $E_0$ grade and $E_0$ grade urea resin adhesive increased with the increase of green tea content. In the case of hybrid composite boards manufactured from $E_1$ grade urea resin adhesive, the MOR was within 0.94~1.03 times the commercial medium density fiberboard. Thus, it was thought that eco-friendly hybrid composite boards with various functionalities and strong strength performances could be manufactured from green tea and wood fibers.