• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.52-61
• /
• 2000

Black locust(Robinia pseudoacacia) and poplar(Populus alba ${\times}$ glandulosa) trees were collected, extracted with acetone-$H_2O$(7:3, v/v) after drying, fractionated with hexane, chloroform and ethylacetate, and freeze dried to get some brown powder. Each fraction of the powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluting solvents. The wood extractives of black locust contained (+)-leucorobinetinidin as flavan, robtin as flavanone and dihydrorobinetin as flavanonol, and robinetin as flavonol. The poplar bark extractives contained various kinds of phenolic compounds : (+)-catechin as flavan, naringeoin, eriodictyol, sakuranetin, aromadendrin and taxifolin as flavanonol, salireposide as salicin derivative, and minor compounds such as aesculin and p-coumaric acid. However, aesculin has not been reported as a constituent of the poplar bark in Korea yet. NMR and FAB-MS analyses were done to elucidate the structures of isolated phenolic constituents.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.43-48
• /
• 2012

This study was investigated on the properties of board made from Miscanthus sinensis var. purpurascens particles differed in density of board and mixed ratio of powder type- and liquid type-phenolic resin. As the board density increase, thickness swelling and bending strength increased while water absorption decreased. With increasing the resin content, water absorption and thickness swelling decreased while MOR and internal bond strength increased. The board made of liquid type phenol-formaldehyde resin was low in water absorption and thickness swelling, and there were similar bending strengths between power type- and liquid type-phenol resin in resin cont of 11% and 13% at the board density $0.4g/cm^3$ and internal bond strength was higher with liquid type-phenolic resin in its bending strength.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.59-66
• /
• 2004

The dried neeldes(1.5 kg) of Juniperus rigida were ground, extracted with acetone-H₂O(7:3, v/v), concentrated, and fractionated with a series of hexane, CH₂Cl₂, EtOAc and water on a separatory funnel. Each fraction was freeze dried to give dark-brown powder and EtOAc and water soluble fractions were chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluent. Spectrometric analysis such as NMR and FAB or EI-MS including TLC were performed to characterize the structures of the isolated compounds. The needles of Juniperus rigida contained a large amount of (+)-catechin, quercetin-3-O-α-L-rhamnopyranoside and isoconiferin, in addition to a small amount of umbelliferone and quercetin-3-O-β-D-rutinoside. The antioxidative activities of each fraction and isolated compounds were tested by DPPH radical scavenging method, and EtOAc soluble fraction, (+)-catechin and quercetin-3-O-α-L-rhamnopyranoside were effective.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.460-466
• /
• 2014

To evaluate wood charcoal as raw material for mineral water production, dissolution of inorganic ions from charcoal to water, pH and adsorption ability of chlorine in water were investigated as main variables. More potassium ion was dissolved in water as higher temperature manufactured charcoal but other ions showed no difference with different charcoal making temperatures. Highest dissolved cation was potassium followed by calcium and sodium. Among wood species, charcoal from Quercus variabilis and Platanus occidentalis showed significantly higher potassium content in water than that of larch, red pine and white pine. Other cations had similar pattern to the potassium but their difference was not apparent as much as potassium. pH value of water treated with charcoal was higher for wood charcoals from Platanus occidentalis (pH 8.5) and Quercus variabilis (pH 8.4) which contained higher inorganic cations. In chlorine removal in water by charcoal, all wood charcoals showed greater chlorine removal than that of the control, but softwood charcoals resulted in higher removal than those of hardwoods. There was no significant difference in the dissolution of cations and pHs between particle charcoal and whole charcoal. With easy of control, whole charcoal is better for mineral water making raw material than particle charcoal does.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.227-235
• /
• 2019

In Korea, various methods are applied to prevent wooden structures from being damaged by termites. However, since there is no way to quickly bring toxic substances in contact with the termites inside the timber, it leads to the damage of wooden cultural property due to the prolonged period of controlling the termites. Accordingly, an indoor evaluation criteria study was conducted for the introduction of powder-type termiticides in Korea, which produced rapid control effects by drilling wood and directly contacting and transferring toxic substances inside the timber. First, contact toxicity and transfer ability of termite dusts were evaluated to establish the criteria for evaluation of effectiveness against Reticulitermes speratus. The contact toxicity confirmed 100% mortality of fipronil, deltamethrin and cyfluthrin termite dusts within 24 h of contact; however, differences occurred in the active ingredient transfer time to the sublethal. In addition, in the case of transfer ability evaluation, the rate of mortality gradually decreased under 1:9 and 1:25 ratio conditions; however, the difference in the reduction rate was identified depending on the type of termite dust. the results of the evaluation of compressive strength of the wood showed that the difference in the measured values between the control group and the conditions of perforation 1 to 3 times, which does not significantly affect the compressive strength of wood. In this study, the criteria of termite dust selection and evaluation method of dust-type termiticides were presented and the applicability of the method was identified.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.113-120
• /
• 2008

This study was performed to develop environmentally-friendly finishing materials for construction. In order to abate formaldehyde and ammonia in indoor air, liquid coating agents for indoor finishing were formulated with bamboo charcoal powder, cypress extracted water, and water-borne acrylic binder. Deodorization rate, far-infrared ray emission rate, anions emission amount, and anti-bacterial effect were investigated. Deodorization rate was increased as cypress extracted water content increased. Deodorization rates of the coating agents were 60.0~98.6% on formaldehyde and 76.7~86.2% on ammonia. No differences on far-infrared ray emission rate, anions emission amount, and anti-bacterial effect were found depending on different formulations. A 91.7% of far-infrared ray emission rate, 77 ea/cc of anions emission amount, and 99.4% of anti-bacterial effect were detected for all formulations. More effective application method of the coating agents revealed was a spray-gun. A $0.66kg/m^2$ of coating agent with a spray-gun and $0.94kg/m^2$ of coating agent with a brush was consumed each.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.73-83
• /
• 2006

The dried needles (1.5 kg) of Abies koreana and Abies holophylla were ground, extracted with acetone-$H_2O$ (7:3, v/v), concentrated, and fractionated with a series of hexane, methylene chloride, ethyl acetate and water on a separatory funnel. Each fraction was freeze dried, then a portion of ethyl acetate soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The isolated compounds were identified by cellulose TLC, $^1H$, $^{13}C-NMR$, COSY, HETCOR, FAB and EI-MS. The needles of Abies koreana and Abies holophylla contained a large amount of aromadendrin-7-O-${\beta}$-D-glucopyranoside (compound III), polydatin (compound VI), (-)-rhododendrol-2-O-${\beta}$-D-glucopyranoside (compound VII), in addition to a small amount of (+)-catechin (compound I), kaempferol-3-O-${\beta}$-D-glucopyranoside (compound IV), myricetin-3-O-${\beta}$-D-glucopyranoside (compound V), naringenin-7-O-${\beta}$-D-glucopyranoside (compound II). DPPH analysis was also tested to investigate the antioxidative effects on the isolated compounds and (+)-catechin and polydatin were effective.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.29-37
• /
• 2007

To evaluate the effect of carbonization temperature of charcoal on the heavy metal adsorption property, Quercus mongolica wood and Larix kaempferi bark powder (100~60 mesh) were carbonized at between 400 and $900^{\circ}C$ at intervals of $100^{\circ}C$. In the properties of carbonized materials which affect the adsorption ability, pH increased with increasing the carbonization temperature, so that the pHs of wood and bark charcoal carbonized at $900^{\circ}C$ were 10.8 and 10.4, respectively. Also, in both materials, the carbon content ratio became larger as the carbonization temperature was raised. At the same carbonization temperature, carbon content ratio of the bark charcoal tended to be greater than that of the wood charcoal. In case of iodine adsorption which indicates the adsorption property in liquid phase, the wood charcoal showed higher adsorption value than the bark charcoal. From the investigation of adsorptive elimination properties of the charcoals against 15 ppm Cd, Zn, and Cu, the higher the carbonization temperature, the greater elimination ratio was. In comparison, the wood charcoal presented higher elimination ratio than that of the bark charcoal. In the wood charcoals carbonized at higher than $500^{\circ}C$, especially, 0.2 g of the charcoal was enough to eliminated almost 100% of the heavy metal ions. Heavy metal ion elimination ratio of the charcoals depended on the kinds of adsorbates. The effectiveness of adsorbates in adsorptive elimination by the charcoals were in order of Cu > Cd > Zn. This is because the physicochemical interaction between the adsorbate and adsorbent affects their adsorption properties, it is considered that subsequent researches are needed to improve the effectiveness of heavy metal adsorption by the charcoals.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.135-144
• /
• 2007

The dried barks of Maackia amurensis were ground, extracted with 95% EtOH, concentrated, and fractionated with a series of light petroleum ether, dichloromethane, ethyl acetate and water on a separatory funnel. Each fraction was concentrated, then a portion of dichloromethane and ethyl acetate soluble was chromatographed on a Sephadex LH-20 and silica gel 60 column using a various solvent system as eluents. The isolated compounds were identified by cellulose TLC, $^1H-$, $^{13}C-NMR$, COSY, NOESY, HMQC, HMBC, FAB and EI-MS. The structures were determined as: 7-O-$\beta$-D-glucopyranosyl-4'-methoxyisoflavone, 7-O-$\beta$-glucopyranosyl(1'''->6'')-$\beta$-D-glucopyranosyl-4'-methoxyisoflavone, 7-O-$\beta$-D-glucopyranosyl(1''''->6''')-$\beta$-D-glucopyranosyl(1'''->6'')-$\beta$-D-glucopyransoyl-4'-methoxyisoflavone, 7-O-$\beta$-D-glucopyranosyl-4', 6-dimethoxyisoflavone. The Free radical scavenging activity using DPPH of the isolated compounds were similar with that of BHT but lower than of $\alpha$-tocopherol.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.1
• /
• pp.39-45
• /
• 2014

Various approaches have been tried to reduce the emission of carbon dioxide in paper industry. One of important approaches is to use PCC manufactured from emission gas as a filler. However, it was recognized that PCC is inferior to other fillers in the paper strength properties of view. Therefore, pretreatment of PCC with pulp powder was tried to mitigate the strength reduction of paper. Pretreatment of PCC with pulp powder improved the bulk(7.4~12.9%) and air permeability(24.8~42.98%), but there is no significant change in opacity. Tensile index, burst index and stiffness were decreased by the use of pretreated PCC with pulp powder. Anionic and cationic PAM were used as a additive for PCC pretreatment in order to improve strength properties. There was no significant change in bulk in all kinds of PAM used in this study. Most strength properties were improved by the pretreatment of PCC with the anionic and cationic PAM and pulp powder, although the opacity and stiffness were more or less decreased.