• Journal of the KSME
• /
• v.34 no.8
• /
• pp.632-642
• /
• 1994

이 글의 앞부분에서는 소각로 관련 선진기술 중에서 소각 연소실부분에 대한 내용을 검토하고, 저공해화를 위한 연소실을 설계할 때 고려해야 할 인자들을 도출한다. 이러한 설계인자들에 대한 정량적인 평가는 설계개념 확인 및 설계인자의 검토를 위한 연소, 유동, 열전달 등 실험실 규모의 실험과 열유동의 전산해석 기법을 활용하여 설계변수의 최적화를 통해 이루어진다. 이 글에서는 컴퓨터. 프로그램을 사용하는 전산유동해석, 축소 모형장치를 사용하는 실험 등 열유동 해석법과 고형 폐기물의 연소특성을 분석하는 실험적.이론적 접근법을 소개한다.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.419-445
• /
• 2005

In 2002, the waste was generated about 277,533tons per day. The treatments of waste were recycling, which had accounted for almost 70%, landfill, which had accounted for 19.8%, and incineration, which had accounted for 6.5%. The energy recovery from incineration has been increased since 1995. The portion of waste in the renewable energy has been increased. Waste incineration heating system generates total 134TOE of $CO_2$ as compared to 6,800TOE of GHG from LNG boiler centralized heating system to bring 98% reduction rate of GHG emissions. We need the integrated model to examine the impacts of waste managements on economy and environments. The Asia-Pacific Integrated Model is introduced as the example of the integrated model.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.2
• /
• pp.109-117
• /
• 2007

In order to investigate the quantitative and qualitative properties of leachate with different composition of MSW in solid waste landfill, three lysimeters filled with bottom ash only (Lysimeter A), bottom ash 70%+municipal solid waste 30% (Lysimeter B), and municipal solid waste only (Lysimeter C) respectively were operated under actual meteorological conditions. From the results, Lysimeter A and Lysimeter B were much higher than Lysimeter C in terms of cumulative generation rates of leachate. The pH in leachate from Lysimeter A are in the range of pH 9 to 11, however, the pH of the leachate was gradually changed to the neutral with time. In the case of $Cl^-$, leachates from Lysimeter A and B with bottom ash have high $Cl^-$ concentration whereas leachate produced from Lysimeter C has low $Cl^-$ concentration. In the Lysimeter C with municipal solid waste only, concentration of organic materials in the leachate was much higher than that of leachate produced from the other Lysimeters.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2184-2193
• /
• 1994

A flow visualization experiment using water-table models was performed. The water-table models simulated the two-dimensional cold flow fields inside the combustion chambers of incinerators. The flow were visualized by small but neutrally bouyant particles photographed by an overhead camera. The experimentally simulated flow fields apparently showed distinct features of two combustion chamber shapes; counter and parallel flow types. The significance of the secondary air injection on the mixing of combustion gases were clearly observed. The effects of the recirculation zones, which were present in the secondary chamber, were discussed by considering the importance of them for optimal combustion.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.8
• /
• pp.870-876
• /
• 2006

In proportion to the increase of industrial development, emission troubles were concerned as global issue. For these reasons, so many researchers and associated institutes effort to reduce pollution with new technology and various devices. As a kind of these methods, we used catalysts as a after-treatment system. At first, we made equipment of model furnace. And various catalysts were equipped at exhaust duct of combustion system, and excess air ratio(a), change cell numbers catalyst materials(Pt, Pd) were changed as experimental conditions. With these various condition, temperature. NOx, CO, HC, $CO_2$ and $O_2$ concentration were measured. As a result, NOx conversion increased with increasing of cell number in Pd catalyst. And Pt catalyst became 100% conversion at 200 and 300 cell. Also, Pt catalyst was better than Pd catalyst at a=1.5 in this condition. In addition, CO and HC concentrations were decreased at a = 1.5 with Pd catalyst.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.154-159
• /
• 2005

In proportion to the increase of industrial development, emission troubles were concerned as global issue. For these reasons, so many researchers and associated institutes effort to reduce pollution with new technology and various devices. As a kind of these methods, we used catalysts as a after-treatment system. At first, we made equipment of model furnace. And various catalysts were equipped at exhaust duct of combustion system, and excess air ratio( ), change cell numbers, catalyst materials(Pt, Pd) were changed as experimental conditions. With these various condition, temperature, NOx, CO, HC, $CO_2$ and $O_2$ concentration were measured. As a result, NOx conversion were increased with increasing of cell number in Pd catalyst. And Pt catalyst were became 100% conversion at 200 and 300 cell. Also, Pt catalyst was better than Pd catalyst ${\alpha}$=1.5 in this condition. In addition, CO and HC concentrations were decreased${\alpha}$=1.5 with Pd catalyst.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.25-32
• /
• 2000

Fire-resistant boom is one of the most important facilities in in situ homing of spilled oil. Thermal response of a fire-resistant boom to turning is experimentally investigated in this paper by using an electric furnace and a burning test facility. This test facility is composed of a test tank, a fire boom, a hood for inhaling smoke, an incinerator for burning up gases and thermocouples, etc. Thereby a systematic method of approach in small laboratory scale is developed to study the performance of a fire-resistant boom. Burning test is carried out for the fire boom model which has been developed through the present study. It is shown that the present fire boom model has capability to withstand the high temperature around 800℃ and high rate of heat flux on it due to homing. For more realistic experimental environments, larger dimensions in devices and longer time in experiments are recommended in near future.

• KDI Journal of Economic Policy
• /
• v.19 no.2
• /
• pp.159-211
• /
• 1997

환경기초시설에 대한 투자가 우리나라 총 환경관련 예산의 80%이상을 차지하고 있다는 사실에서도 알 수 있듯이, 수질 폐기물의 관리를 위한 기초시설의 건립과 운영은 환경정책의 가장 중요한 부분인 동시에 대규모의 재원을 필요로 하는 사업이며, 따라서 비용극소화를 위한 많은 노력이 요구된다. 환경기초시설의 설치 운영에 소용되는 비용은 크게 두 부류로 나누어지는데, 설치비와 운영비에는 규모의 경제가 있어서 규모가 큰 시설일수록 평균비용이 감소하는 반면, 수거운반비와 보상비는 규모가 큰 시설일수록 평균비용이 증가한다. 따라서 총비용은 시설규모의 U자형 함수가 될 것이며, 이 논문의 목적은 각 비용요소를 계량화하여 환경기초시설의 적정규모, 즉 총비용을 극소화시키는 시설규모를 도출하기 위한 모형을 제시하는 것이다. 이 논문에서 제시한 모형은 수학적으로 단순하여 현실 문제에 쉽게 적용할 수 있으며, 간단한 컴퓨터 프로그램을 통하여 적정규모를 계산하고 비용분석을 할 수 있다. 이 모형을 우리나라의 소각시설에 적용한 결과 다음과 같은 정책적 시사점들을 얻을 수 있었다. 첫째, 생활폐기물의 수거운반비가 1,500원/톤/km이고 가구들이 폐기물 관리지역내에 고르게 분포되어 있다고 가정할 때에 총소각비용을 최소화하기 위해서는 약 23만 가구당 처리용량이 830톤/일인 소각장을 설치 운영하여야 하며, 이때에 폐기물 단위당 처리비용은 약 100원/kg이다. 둘째, 가구당 폐기물발생량과 인구밀도의 지역간 차이로 인하여 적정규모 역시 지역간 차이가 있으며, 우리나라에서는 도시지역일수록 규모가 큰 시설이 효율적이다. 셋째, 폐기물 처리사업은 오염의 원인과 수익의 주체가 분명하므로 처리에 소요되는 비용은 가계가 부담하여야 하며, 이를 위하여 현재의 쓰레기봉투가격을 인상하여야 한다. 넷째, 현재 폐기물 처리시설의 설치 운영이 공공부문에 의하여 이루어지고 있어 이를 민영화하는 것이 바람직한데, 그 이유는 환경기초시설의 적정규모를 도출함에 있어 핵심사항인 비용에 관한 정보를 관련 분야의 민간부문이 더 많이 가지고 있을 가능성이 높으며, 입찰을 통하여 사업자를 선정할 경우 가장 효율적인 기업에 의한 설치 운영이 가능하기 때문이다. 이를 위하여 쓰레기봉투가격의 인상과 함께, 폐기물의 처리가 행정구역에 연계되어 이루어지고 있는 현재의 제도 역시 폐지되어야 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.503-510
• /
• 2016

Incinerators generally emit pollutants such as NOx and CO during the combustion process. In this paper, pollutant emissions and temperature distributions were studied in a simulated incinerator with a reversed (relative to the flue gas flow) secondary air injection system. The experiments were performed by using a lab-scale furnace in order to evaluate the effects of the injection location, direction and flow rate of secondary air jets. The emission of NOx was lower in the case of reversed secondary air injection than in the case of cross injection, due to the recirculation and mixing of the exhaust gas. In the reversed air injection cases, thermal NOx emissions decreased as secondary air ratio increased from 30 to 60 and slightly increased at secondary air ratios higher than 60. In most cases, CO emissions were not detected except for a few reversed secondary air injection cases, in which cases CO concentrations below 2ppm were observed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.218-218
• /
• 2021

최근 환경 문제과 관련하여 건설 분야에서 발생하는 환경적인 부담을 줄이고자 다양한 재활용 소재들에 대한 연구에 대한 관심이 증가하고 있다. 특히 폐기물 중 생활계에서 발생하는 폐플라스틱은 '쓰레기 대란'이라는 사회적 문제로 대두된 사례가 있다. 생활계에서 발생하는 폐비닐은 다양한 조성으로 이루어져 재활용 대상에서 제외되기 때문에 매립 또는 소각되는 플라스틱의 양을 줄이고 재활용율을 늘릴 수 있는 연구가 필요하다. 본 연구는 생활계에서 발생하는 폐비닐을 융용시켜 무기첨가제 등을 한 복합 Alloy를 생산한다. 또한 재생이 가능한 복합 Alloy를 압출 또는 사출 과정을 통해 테트라포드의 형태를 만들 수 있는 Preform으로 가공하는 공정연구 하였으며 이러한 Preform을 해안 및 항만에서 사용되는 콘크리트 피복재에 적용하였을 때 플라스틱 소재와 콘크리트 소재의 비중의 차이로 인해 발생하는 안정성을 정량적으로 평가하는 수리모형 실험를 수행하였다.