• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.325-329
• /
• 2015

Purpose: The aim of this study was to compare the film thicknesses of several resin cements as a function of time after mixing and to examine the effect of working time on the film thicknesses. Materials and methods: The film thickness (${\mu}m$) of 4 resin cements (n=10), 1 composite resin (Panavia F 2.0), 3 self-adhesive resin (Clearfil SA luting, Zirconite, RelyX U200) cements was measured at 20-second intervals after mixing of the cements up to 200 seconds under a load of 50 N. Linear regression was fitted to verify the effect of working time on the film thickness of each cement. Data were compared to the working time recommended by manufacturers using Wilcoxon test ($\alpha$=.05). Results: All of the materials showed a positive linear correlation between the film thickness and working time. There was no statistically significant difference between the working time based on our results and the values recommended by the manufacturers even though there was a discrepancy between those two values. Conclusion: The film thickness of resin cements could increase with the increase of working time. Working time to meet the ISO standard of $50-{\mu}m$ maximum film thickness could be different from the manufacturer's recommended value.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.163-170
• /
• 2011

In this paper, we analyzed the phase change of 5-triangular trihedral comer reflectors by using X-band Ground-Based Synthetic Aperture Radar (GB-SAR) system. Each reflector was set as a stationary target at a different distance from the system. We obtained total 123 full-polarization images during 40 hours continuously at 20 minute interval. Results of SAR interferometric analysis showed phase changes of maximum 2 radians and followed similar pattern with atmospheric data. Through a GB-SAR phase formula that includes refractive index in the air, we performed regression analysis for refractive index as a function of atmospheric humidity, temperature and pressure. As a result, refractive index of air in X-band showed relatively high coefficient of determination with humidity and temperature (0.72 and 0.76 on average, respectively) but not so with pressure (0.34). The refractive index of air in X -band changed by 3.14\;{\times}\;10^{-5}$ during the measuring time with a humidity range of 50% ~ 90% and a temperature range of $-1^{\circ}C$ ~ $9^{\circ}C$. We expect that a total expression of refractive index of air including humidity, temperature and pressure can be calculated when more extensive data would be collected at various atmospheric conditions.

• Korean Journal of Ichthyology
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1998

The early history of Korean mandarin fish, Siniperca scherzeri was studied to obtain some information required in aquaculture and reinforcement of natural population. During the period from June 1996 to July 1997, the mature adults of Siniperca scherzeri were collected from the middle Soyang Lake at Puksan - myon, Chunchon - shi, Kangwon - do, Korea. The eggs from females were obtained by injecting HCG or/and GnRH - a and fertilized by dry method in the laboratory. The fertilized eggs, measuring 1.70~2.10 mm in diameter and expanded to 2.20~2.66mm after absorption of water, were globosity, light orange yellow, separative, submergence and had one large oil globules of 0.5~0.7 mm. The blastodisc was formed in 1 hour and cleavage started in 1 hour 30 min. after fertilization, and the intervals of each stage of cleavage was about 50 min. at the water temperature of $21{\sim}24^{\circ}C$. Hatching occurred 131 hours 30 min. after fertilization and newly hatched larvae were 5.86~6.85 mm in total length(TL) and numerous stellate melanophores were distributed on the yolk and abdomen of caudal peduncle. The yolk was almost absorbed and the teeth development. 3 days after hatching, at 6.98~7.60 mm TL. The head spines and the teeth were largely developed and all fins were completely formed and became postlarva stage 15 days after hatching, at 10.10~12.90 mm TL. The body shape and the color pattern were similar to adult, 25 days after hatching, at 15.3~23.8 mm TL. In 5 months after hatching were reached at 154.10~175.02 mm TL and 49.32~82.67 g in body weight.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.43-50
• /
• 2017

In the present study, the multiple light scattering method was used for analysis of early hardening behavior of natural hydraulic lime (NHL) containing inorganic additives. In order to improve the properties of self-manufactured NHL, blast furnace slag and three types of gypsum were mixed with mixing ratio, and a water/solid ratio of fresh NHL paste was fixed 0.6. The fresh pastes in flat-bottomed cylindrical glass tubes were placed in the instrument. The backscattering flux (BS) of light from fresh pastes was then periodically measured at 10 minutes intervals the entire length of the sample (55mm) at $23^{\circ}C$ for 24 hours. The rate of increase of BS, slope of a linear equation to the mean value of BS (%) as a function of hydration time, was increased from 0.02 to 0.38 BS %/hour due to addition of blast furnace slag and gypsum. In the case of addition of hemi-hydrate, BS (%) and rate of increase in BS were highest.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.91-94
• /
• 2012

This study was conducted to develop an algorithm for determination of abnormal body temperature in piglets through skin and core temperature database at normal condition. 5 piglets (mean BW : 46 kg) were employed for the experiment. They were adapted in the individual metabolism cage set at $22.5{\pm}2.0^{\circ}C$ of room temperature for 2 weeks before the measurement of body temperature. Ear, neck, head and subcutaneous neck temperature (as core temperature) of piglets were measured for every 1 minute during 30 consecutive days through 1mm k-type thermocouple wire and NI-devices (National Instruments Corporation, Austin, Texas, USA). Body temperature data were accumulated and integrated into the 1 day unit. Change of daily mean skin and core body temperatures in piglets were lowest at around 06:00, highest at around 14:00 and gradually decreased until the day after 06:00. Each skin temperatures were varied with the measuring site and largely depended on the room temperature changes. Established database of skin and core body temperature in piglets through this study can be applied to develop an algorithm for monitoring and determining the abnormal condition of animal by using radio frequency identification.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.3
• /
• pp.35-45
• /
• 2010

The mechanism of load transfer by punching shear in pile-supported embankments is investigated. Based on the geometric configuration of the punching shear observed in sand fills on soft ground, a theoretical analysis is carried out to predict the embankment loads transferred on a cap beam according to punching shear developed in pile-supported embankments. The equation presented by the theoretical analysis was able to consider the effect of various factors affecting the vertical loads transferred on the cap beam. The reliability of the presented theoretical equation is investigated by comparing it with the results of a series of model tests. The model tests were performed on cap beams, which had two types of width; one is narrow width and the other is wide width. Sand filling was performed through seven steps. Two types of loading pattern were applied at each filling step; one is the long-term loading, in which sand fills at each filling step were kept for 24 hours, the other is the short-term loading, in which sand fills at each filling step were kept for 2 hours. The vertical loads measured in all model tests show good agreement with the ones predicted by the theoretical equation. Finally, the predicted vertical loads also show good agreement with the vertical loads measured in a well-instrumented pile-supported embankment in field, where cap beams were placed on too wide space.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.183-192
• /
• 1998

The long-term observation of temperature in the coastal waters adjacent to the Wolsung Nuclear Power Plant has been carried out from November 10, 1996 to August 22, 1997, for approximately 280 days using a real-time temperature measurement buoy system. The sea-surface temperature was measured at every 10 minute using 10 buoys. The vertical structure of temperature was investigated near the outlet of the plant with two thermistor chains equipped with 10 sensors at 1 m interval The monthly averaged temperature was the lowest with spatial average of $12.8^{\circ}C$ in February and was the highest in August with spatial average of $19.6^{\circ}C$. The extremely low temperature was frequently observed between June and August, which seems to be the consequence of the intrusion of cold water near the southeastern coast of Korea. Distributions of the daily and hourly averaged temperature show that the highest temperature always occurred near the outlet of the plant and the warm-water patch moved along the north-south direction with the semidiurnal period. The semidiurnal fluctuation of temperature was also observed near the surface of the vertical profiles. The spectral analysis of temperature between February and April 1997 shows that the semidiurnal components prevailed near the outlet. It is likely that the semidiurnal components were due to the prevailing semidiurnal tide in this region. In August 1997, the diurnal components were dominant at the surface water of all stations except Station 12, which suggests that the warm water from the outlet of the plant has less effects in summer on the surrounding waters than the strong solar radiation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1069-1078
• /
• 2008

The purposes of this study were to identify the consumer behavior using in campus specialty coffee shop and to establish the marketing strategies through Importance-Performance Analysis (IPA) of service quality. Questionnaires were distributed to 725 students at K University located in Masan, from April 23 to May 3, 2007. Finally, 621 questionnaires were included in the final analysis (response rate: 85.7%). For statistical analysis, SPSS (12.0) was used to conduct the descriptive analysis, t-test, factor analysis and reliability test. The results of this study were as follows. The average cost of using specialty coffee shop in campus was \ 2,096, the average staying time was 25.92 min and the average number of visits per month was 2.17 times. The importance level of 'employee's attitude', 'physical environment', 'sensory quality of coffee', 'beverage features', 'representativeness' were 3.88, 3.79, 3.73, 3.67, 3.28 points, respectively. Also, the performance level of 'sensory quality of coffee', 'beverage features', 'employee's attitude', 'physical environment', 'representativeness' were 3.13, 3.06, 3.05, 2.77, 2.61, respectively. The importance and performance levels of service quality of specialty coffee shop in campus were significantly different (p<.001). Establishment of marketing strategies for in campus speciality coffee shop was possible through the IPA of service quality. Strategies for improving customer satisfaction were to secure enough chairs/ tables, to procure comfortable chairs for customer and to ensure the quality of coffee bean and service of employee.

• Neonatal Medicine
• /
• v.17 no.1
• /
• pp.102-108
• /
• 2010

Purpose : The goal of this study was to measure bilirubin levels over 6 hours using a transcutaneous bilirubinometer. The change in the bilirubin levels were recorded in anomogram. The natural progress of jaundice in neonates was monitored using the nomogram and cases were identified that needed further follow-up observation and treatment. Methods : The subjects of this study were 986 healthy term or near-term infants at the age of 35 weeks or older who were born at Sung-Ae General Hospital during the period from October 1, 2007 to April 30, 2009 and whose parents were both Koreans. Transcutaneous bilirubin measurements were obtained using a transcutaneous bilirubinometer (Minolta, JM-103) from 6 hours of life to discharge at intervals of 6 hours. A nomogram was derived from the obtained data and compared to the delivery method, gestational age, and feeding method. Results : Percentile graphs were drawn according to time. Based on the graphs, phototherapy was necessary in more than 90 percent of the infants between 35 and 37.6 weeks of age and in 95 percent of the infants 38 weeks and older. The mean bilirubin level at 24, 48, 72 and 96 hours after birth were compared according to the delivery method, gestational age, and feeding method. The bilirubin level in 48 hours was significantly higher in neonates born via cesarean section delivery compared to the neonates born via vaginal delivery, however the levels were not statistically different at the other hours. Conclusion : The results of this study show the nomogram derived from hour-specific transcutaneous bilirubin levels. This information can be used to predict the risk for subsequent significant hyperbilirubinemia.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1171-1178
• /
• 2023

In study, we investigated changes on growth and chlorophyll concentration on sprouted barley by fractionated X-ray irradiation (FXI). Group was divided into the control group (CG), 1-time irradiation group (30 Gy once), 2-time irradiation group (15 Gy 2 times), and 3-time irradiation group (10 Gy 3 times), and 20 grains were used per group. Experimental group (EG) was exposed by using linear accelerator (Clinac IS, VERIAN, USA), by 6 MV X-ray, SSD 100 cm, 18×10 cm², 600 MU/min. Length was measured every day until 9th day, and chlorophyl was analyzed using spectrophotometer(uv-1800, shimadzu, japan) in 9th day. Data analysis was performed the One-way ANOVA using SPSS ver 26.0(Chicago, IL, USA). In the pre-germination irradiation group (Pre-GIG), the CG had greater length than the EG on all measurement days, and as the number of FXI increased, the length became shorter. In the post-germination irradiation group (Post-GIG), the length of the CG was statistically significantly greater than that of the EG on all measurement days, and as the number of FXI increased, the length also became longer. The chlorophyll concentration was higher in the Post-GIG than in the Pre-GIG, and chlorophyll concentrations of EG was higher in the Pre-GIG than in the CG, as well as and Post-GIG. In addition, the smaller the number of FXI, the higher the chlorophyll concentration in both groups. FXI was found to affect the growth and chlorophyll concentration of sprouted barley.