• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.15-23
• /
• 2005

In this paper, the static and dynamic behavior of partly wrinkled membrane was studied. Membrane finite elements were used in the analysis and the wrinkling in the element was accounted for by a penalty-parameter material modeling which was implemented as a user subroutine to ABAQUS. The wrinkle algorithm was applied to a corner-loaded square membrane to investigate the effect of wrinkling on the static and dynamic behavior.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.739-741
• /
• 2005

최근 게임에서 자주 등장하기 시작한 랜덤 지형 맵 생성기법으로 인해 단순한 경로 찾기가 아닌 지형분석을 통한 복잡한 경로 찾기 문제가 많은 관심을 받고 있다. 이에 로보틱스 분야에서 경로 찾기에 이용되는 가시성그래프(Visibility Graph, Vgraph)가 지형분석과 경로 찾기를 동시에 해결할 수 있는 방법으로 제안되고 있다. Vgraph를 이용하면 지형의 로드맵을 효과적으로 생성할 수 있을 뿐 아니라 A* 알고리즘과 결합하여 최적의 경로를 찾는 것을 보장하는 장점이 있다. 그러나 Vgraph에 의해 구해진 경로는 장애물의 정점에서 정점으로 이동하기 때문에 항상 장애물의 모서리를 향해 움직이며 벽에 붙어가는 듯이 보여 부자연스러운 것이 단점이다. 본 논문에서는 설계자가 요구하는 여유공간 c만큼 장애물을 확장하여 확장된 장애물에 대해 가시성그래프를 생성함으로써, Vgraph의 장점은 유지하며 단점을 보완할 수 있는 방법에 대해 제안한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.97-103
• /
• 2000

This paper deals with residual stresses induced at the viscoelastic adhesive layer between the semiconductor chip and the leadframe during adhesion process. The adhesive layer has been assumed to be“thermorheologically simple”. The time-domain boundary element method(BEM) has been employed to investigate the behavior of interface stresses. Numerical results show that very large stress gradients are present at the interface corner and such singularity might lead to local yielding or edge delamination.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.409-417
• /
• 1994

In extracting contours from elevation matrix, the most important problem is to solve the degenerate case where four cross point arise in a grid. This paper describes a technique which performs the checking of degenerate case and determination of next point simultaneously. It requires minimum number of array indexing. Also this paper proposes a technique which reduces the number of array indexing by using LOWER/HIGHER information of a cross point designated according to height difference of grid vertices. In addition, we describe a data structure which is proper for representing cross points and tracing them.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.20-24
• /
• 1990

A fast convergent solution to the scattering problem of a transverse electric (TE) plan wave by a periodic strip grating with a dielectric slab is considered. The present method follows from an expansion of the equivalent surface magnetic current placed over the shorted slot according to the equivalence principle in a series of Chebyshev polynomials satisfying the appropriate edge condition. To examine the accuracy and convergence of the present method, the numerical results are calculated for the reflection and transmission coefficients and compared with other results available in the literature.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.285-299
• /
• 1993

The objective of the present study is to analyze material flow in the metal forming processes by using computer simulation and experiment with model material, plasticine. A UBET program is developed to analyze the bulk flow behaviour of various metal forming problems. The elemental strain-hardening effect is considered in an incremental manner and the element system is automatically regenerated at every deforming step in the program. The material flow behavior in closed-die forging process with rib-web type cavity are analyzed by UBET and elastic-plastic finite element method, and verified by experiments with plasticine. There were good agreements between simulation and experiment. The effect of corner rounding on material flow behavior is investigated in the analysis of backward extrusion with square die. Flat punch indentation process is simulated by UBET, and the results are compared with that of elastic-plastic finite element method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.495-503
• /
• 1997

In this paper, the E-polarized electromagnetic scattering problems by a resistive strip grating with tapered resistivity on 3 dielectric layers are analyzed to find out the effects for the tapered resistivity of resistive strip and the relative permittivity and thickness of 3 die- lectric layers by applying the Fourier-Galerkin moment methods. The induced surface current density is expanded in a series of Jacobi-polynomial ${P^{(\chi,\beta)}}_p$(.) of the order $\alpha$= 0 and $\beta$=1 as a kind of orthogonal polyomians, and the tapered resistivity assumes to vary linearly from 0 at one edge to finite resistivity at the other edge. The normalized reflected and transmitted powers are obtained by varying the tapered resistivity and the relative permittivity and thickness of dielectric layers. The sharp variation points are observed when the higher order modes are transferred between propagating and evanescent modes, and in general the local minimum positions occur at less grating period for the more relative permittivity of dielectric layers. It should be noted that the patterns of the normalized reflected and transmitted powers for the tapered resistivity are very much different from those of the uniform resistivity and perfectly conducting cases. The proposed method of this paper cna solve the scattering problems for the tapered resistive, uniform resistive, and PEC strip cases.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.1
• /
• pp.11-19
• /
• 1998

Non-manifold topological operations such as Euler and Boolean operations provide a versatile environment for modeling domains. The implementation of these operations raises geometrical issues that need to be addressed to ensure the topological validity of the underlying model, and they uses the glue operation which provides a basic method to modify the topology of non-manifold models when vertices, edges and faces are contacting each other. Topological information such as adjacency relationships should be inferred when gluing non-manifold models. Two methods of reasoning can be employed to find the topological information : topological reasoning and geometrical reasoning. The topological method can infer the adjacency relationships by using stored topological information. On the other hand, the geometrical method can find topological ambiguities by considering the geometrical shape at the local area of gluing when the topological relations were not stored. This paper describes the geometrical reasoning method.

• Journal of Korea Game Society
• /
• v.3 no.1
• /
• pp.86-93
• /
• 2003

In this paper, we propose a new antialiasing method using filtering technique which is base on morphological pixel structure Aliasing occurs along the edge of lines and polygons. This undesirable effect happens because there are not enough pixels available on a typical monitor to properly display mathematically smooth lines and polygon edges. Aliasing can be very distracting. In a typical graphic scene, aliasing artifact will be visible along the edges of all objects that greatly diminish of realism. The proposed antialiasing method attempts to smooth extreme jagged contour lines and edges by properly handling pixel's structure, surface type and adjusting the pixel color according to the amount of pixel coverage. Next, we use filtering technique considering morphological pixel structure. Experimental results have shown that the propose algorithm achieves better performance in reducing noise for antialiasing. The method will be widely applied to basic antialiasing technique for computer graphic applications.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.78-83
• /
• 2014

In this paper, the solutions of TM (transverse magnetic) scattering problems by perfectly conducting strip grating on two dielectric layers are analyzed by applying the FGMM (Fourier Galerkin moment method) as a numerical method. For the TM scattering problem, the induced surface current density is expected to the very high value at both edges of the strip, then the induced surface current density on the strip is expanded in a series of the multiplication of the functions of appropriate edge boundary condition and the Chebyshev polynomials of the first kind. The numerical results are obtained for the magnitude of induced current density, the normalized reflected power and transmitted power. The numerical results using proposed functions were improved the convergence faster than existing exponential functions, and the numerical results shown the good agreement compared to those of the existing papers.