• Title/Summary/Keyword: 모래층

Search Result 374, Processing Time 0.026 seconds

The Case of Industrial Factory Wastewater Treatment and Reusing by Using of Constructed Wetland (식물정화조를 이용한 공업용 폐수의 정화 및 재활용 사례)

  • 김혜주;이옥하
    • Korean Journal of Environment and Ecology
    • /
    • v.16 no.2
    • /
    • pp.179-187
    • /
    • 2002
  • Constructed wetland was built for industrial factory wastewater treatment with environmentally sound method from July to October, 2000. Ultimately this case study was carried out to conserve water quality of river and underground water and to provide wildlife habitat and rest place for people in the industrial area. The size of constructed wetland was 10m$\times$6m (upper area) with a treatment capacity of 2.5㎥ per day. It was supplied with wastewater 0.625㎥ at intervals of six hours. Vertical flow system was chosen to promote efficiency. Draining layer was built one meter in soil depth out of sand mixed with pebbles in a ratio of two to one. Perennial emergent plants, Phragmites communis, Typha orientalis, Juncus effusus, Iris pseudoacorus, 20 individuals per square meter were planted. In the aspect of reusing, eco-pond was created for increasing biological species diversity and also deck and information signboard were established for the education of environment. As the result of monitoring, it was revealed that the constructed wetland was effective in removal of BOD$_{5}$, COD, T-N, T-P and has being gradually improved as a wildlife habitat(biotope).

Soil Improvement using Vertical Natural Fiber Drains (연직천연섬유배수재를 이용한 연약지반 개량)

  • Kim, Ju-Hyong;Cho, Sam-Deok
    • Journal of the Korean Geosynthetics Society
    • /
    • v.7 no.4
    • /
    • pp.37-45
    • /
    • 2008
  • A pilot test using environmentally friendly drains, was carried out to evaluate their applicability potential in the field. The pilot test site was divided into 5 different areas, with several combinations of vertical and horizontal drains installed for evaluation. Conventional natural fiber drains (FDB), new developed straw drain board (SDB) and plastic drain board (PDB) were used as vertical drains, while sand and fiber mats were used as horizontal drains. Surface settlement rates and excess pore pressure generation/dissipation tendency of PDB and FDB are almost identical except those of SDB. Cone tip resistance obtained from cone penetration test measured at the end of 1st consolidation stage for upper soft layer definitely increased irrespective of types of vertical drains. The monitoring and site investigation test data obtained at the pilot test site prove the vertical natural fiber drains can be used as substitutes of conventional plastic and sand material.

  • PDF

A Study on the Performance Evaluation and the Improvement of the Quality Stand ard of Block Pavements (블록포장의 공용성 평가 및 품질기준개선 연구)

  • Jung, Jong-Suk;Park, Yong-Boo;Lee, Kyoung-Hee;Hwang, Chang-Kyu
    • International Journal of Highway Engineering
    • /
    • v.10 no.2
    • /
    • pp.115-124
    • /
    • 2008
  • This Study was investigated in main breakage types of 50 interlocking block pavements in apartment houses and evaluated on their performance. According to performance evaluation, maintenance control index of 9 aged interlocking block pavements ranged 7.9 to 8.9. These values meant that the condition of interlocking block pavements were still good. Therefore, it was concluded that the 10-year cycle of the block replacement recommended by Ministry of Construction & Transportation is necessary to reappraise. To objectively evaluate the performance of interlocking block pavements, this study presented the criteria of maintenance control by combining two maintenance control standards suggested by Ministry of Construction & Transportation and the Japan Interlocking Block Pavement Engineering Association. Also, this study suggested that the domestic standard is necessary to include durability standards and quality standards of joint filling materials and bedding sand layer for increasing expectation life and reducing maintenance costs of interlocking block pavements.

  • PDF

Estimation of Boundary Shear Velocities from Tidal Current in the Gyeonggi Bay, Korea (한국 경기만에서 조류자료에 의한 경계면 전단속도 산출)

  • CHOI, JIN-HYUK
    • 한국해양학회지
    • /
    • v.26 no.4
    • /
    • pp.340-349
    • /
    • 1991
  • From tidal current measurements on a tidal sand ridge in the Gyeonggi Bay from August 24 to September 29, 1987, tidal current velocities at 1.0 m above bottom (U/SUB 100/) and boundary shear velocities (U/SUB */) are calculated. The mean speeds of tidal current for flood and ebb over the entire period are 56.3 cm/sec and 63.7 cm/sec in mid-depth (9.0 m above bottom), and 43.9 cm/sec and 43.8 cm/sec in near-bottom (1.5 m above bottom). The exponent(P) in "power law", which is generally used for extrapolation from the mid-depth current velocity to that at the top of nationally logarithmic layer, is estimated to be 0.15 in the study area. Using logarithmic velocity profile assumption, mean values of U/SUB 100/ and U/SUB */ are calculated to be 41.4 cm/sec and 2.39 cm/sec, respectively. The mean value of U/SUB */ (2.39 cm/sec) is much higher than the critical shear velicity (U/SUB *c/) of 1.40 cm/sec reported by Choi (1990). and thus, it can be suggested that the most of sands on the tidal sand ridge in the study area are easily eroded and transported for the greater part of tidal period.

  • PDF

The Measurement System and Physical Property of Unconsolidated Sample under Trinxial Pressure (삼축압력하에서의 미고결 시료의 물성측정을 위한 측정 장치와 물성 연구)

  • Bae, Wi-Sup;Chung, Tae-Moon;Kwon, Young-Ihn;Kim, Hyun-Tae
    • Journal of the Korean earth science society
    • /
    • v.28 no.7
    • /
    • pp.838-846
    • /
    • 2007
  • A measurement system of tri-axial pressure was designed and constructed to measure permeability and resistivity under changing confining pressure. The system was designed to measure the permeability and resistivity of a core simultaneously, consisting of tri-axial supporting device and sets of dual-flow measurement. In this measurement system the permeability and resistivity of a sample can be directly measured and porosity can be obtained using Archie's laws. As for physical properties, artificial core samples are made from mixtures of standard commercial sand and mud of illite. In-situ sediment cores were sampled at the water-depth of 1,800m in the Ulleung Basin East Sea. In order to investigate the effects of confining pressure changes on physical properties, permeability and resistivity changes were monitored with increasing confining pressure. In this study, it was found that with the increase of confining pressure, permeability and porosity tend to decrease and resistivity tend to increase exponentially.

An Analog Experimental Model of the Formation Mechanism of Sedimentary Basins (퇴적분지형성 메커니즘에 관한 아날로그 모델 실험)

  • Kim, Woo-Seok;Jung, Jahe
    • The Journal of Engineering Geology
    • /
    • v.28 no.3
    • /
    • pp.397-409
    • /
    • 2018
  • Izumi sedimentary basin (ISB), west of Shikoku, Japan, is widely distributed across the western side of the Sakuragi Bend of the Japan Median Tectonic Line (MTL). It is not obvious how the ISB formed, but this feature is similar to an asymmetric pull-apart basin. The stratigraphic succession and tuff layers show that ages tend to decrease toward the Sakuragi Bend. We investigate whether the ISB is an asymmetric pull-apart basin using analogue model experiments with running sand. A pull-apart basin of length 60 cm and width 20 cm is formed, and secondary normal faults appear on the surrounding surface. A cross-section parallel to the direction of displacement shows that the stratigraphic succession of the pull-apart basin becomes younger toward the releasing bend. A listric normal fault, which has the opposite dip to the master fault, is observed in a cross-section perpendicular to the direction of displacement. These results are consistent with the observed properties of the ISB west of Shikoku, thereby supporting the possibility that the ISB is an asymmetric pull-apart basin.

A Study on the Soil Stress Distribution in Furrow Slice (역토내(壢土內)의 응력분포(應力分布)에 관(關)한 연구(硏究))

  • Lee, Ki Myung;Lee, Suk Gun;Kim, Tae Han
    • Journal of Biosystems Engineering
    • /
    • v.7 no.2
    • /
    • pp.1-7
    • /
    • 1983
  • In order to identify the stress distribution on the furrow slice a small soil bin instrumented with soil stress meters was designed and constructed. From a series of experiments conducted in the soil bin the following results were obtained. 1) Neither the cutting conditions nor the soil conditions affected the direction of the principal stress. 2) The magnitude of the principal stress increased as the tillage depth increased. However, no effects due to lift angles were shown on the magnitude of the principal stresses. 3) The maximum principal stress increased with increase of the moisture and clay contents in the soil. 4) In the clay soil, the maximum principal stresses were distributed uniformly over the tillage depth. However, as the sand content increased, the maximum principal stresses decreased gradually on the top layer so that the distribution over the tillage depth became a trapezoidal shape.

  • PDF

Influence of Pore Pressure Behind a Subsea Tunnel on Its Stability (터널 배면의 간극수압이 해저터널의 안정성에 미치는 영향)

  • You, Kwang-Ho;Lee, Kwang-Hoon
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.8 no.4
    • /
    • pp.355-363
    • /
    • 2006
  • In this study, it was analyzed how the pore pressure behind a subsea tunnel influences on the stability of the tunnel. The tunnel is located in the soft rock layer, and a soft sandy layer and weathered soil layer are located on the top of it. Coupled numerical analyses are performed for both drained and undrained condition with varying coefficients of lateral earth pressure. In the case of undrained conditions, the stability of the tunnel was analyzed with different thicknesses of shotcrete. On the other hand, a sensitivity analysis was performed with different hydraulic conductivities and porosities of the shotcrete for the drained conditions. The stability of a subsea tunnel was evaluated in terms of safety factor suggested by You et al.(2000, 2001, 2005) based on the shear strength reduction technique. In this paper, the safety factor of a tunnel was calculated under steady state flow condition during hydro-mechanical coupled analysis. As a result, it was found that the stability of a subsea tunnel could be rather increased by allowing a proper amount of groundwater inflow into a subsea tunnel.

Oogenesis of Microphysogobio yaluensis (Pisces, Cyprinidae) in the Korean Endemic Species (한국고유종 돌마자의 난자형성과정)

  • Kim, Jae Goo;Reu, Dong Suck;Park, Jong Yong
    • Korean Journal of Ichthyology
    • /
    • v.29 no.4
    • /
    • pp.252-257
    • /
    • 2017
  • The oogenesis of the Microphysogobio yaluensis was investigated using light microscopy. Various developmental oocytes appeared in the ovary of the M. yaluensis. The oogenesis is largely divided into four stages: nuclear-chromatin stage, peri-nucleoli stage, vitellogenesis (yolk vesicle and yolk granule stages), and mature stage. The nuclear-chromatin is distributed in a large germinal vesicle as threads. The peri-nucleoli stage has many acidic nucleoli lining at the inner side of the nuclear membrane and an egg envelope just weakly starts. As the oogenesis gradually proceeds, they change to the vitellogenesis stage. The oocyte become to drastically increase and the marginal area of the ooplasm is covered with many vacuoles showing no negative reactions with hematoxylin and eosin staining, called the yolk vesicle stage. Many yolk vesicles-owned oocyte largely increase and as the development continues, its ooplasm is changed from the yolk vesicles to the yolk granules of eosinophilic. At the mature stage, lots of granules merged into a big yolk mass, acidophilic. Even at the mature stage, the egg envelope was still thin between the ooplasm and the follicular layer of the oocyte.

Acoustic Scattering Characteristics of the Sea Bottom ( 1 ) (해저의 초음파 산란 특성에 관한 연구 ( I ))

  • Lee, Dae-Jae;Sin, Hyeong-Il;Park, Jung-Hui
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.26 no.1
    • /
    • pp.51-56
    • /
    • 1990
  • The authors carried out an experiment to investigate the echo fluctuations from ocean bottom due to ship's motion. The bottom echoes was continuously measured, by using a 50 kHz Echo sounder on board of the ship being at anchor under the sea condition of 15 knots in wind velocity and approximately 2 meters in wave height, to extract the information about the pulse stretching and the ship's motion from the first return and the second return. A data acquisition system was used to record digitally the envelope of the echoes, and the analysis was applied to the echo data collected from the continental shelf in the South China Sea. The results obtained can be summarized as follows: 1. The equivalent pulse width of the second return echoes from ocean bottom was 2.4 times longer than that of the first return echoes. 2. The echo peak values of the first return fluctuated markedly than that of the second return and was shown to be extremely sensitive to small change in ship's motion. 3. Energy target strength and peak target strength of the sandy-mud bottom were -13.4 dB and -14.6 dB, respectively.

  • PDF