• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.278-285
• /
• 1994

We investigated the spectral characteristics for temperature and driving current change in visible laser diode. As a result of spectrum analysis, the ratio of frequency change for temperature and driving current change were about $33 GHz/^{\circ}C$, 6.6 GHz/mA in the region which was not mode hopping range. Compared to the sharp mode hopping in the near IR single mode AlGaAs lasers, the visible laser diode showed relatively broad multimode operation in the mode hopping region. We performed the experiment of injection-locking characteristics analysis for visible laser diode. Locking half bandwidth(LHBW) was measured 0~5.0 GHz for $0~25\muW$ input power and it was dependent on the input power. Also, LHBW for polarization angle was dependent on the difference of polarization angle between master laser and slave laser. The phase change of injection-locked output beam of the slave laser diode as a function of the drive current was measured in the interferometer which was composed of master laser and slave laser. The ratio of phase change with the slope of 5.0~1.3 rad/mA was obtained within injection-locking range for the change of $2~25\muW$ input power. power.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.421-432
• /
• 2002

In this study the modal characteristics and responses of an asymmetric structure with added viscoelastic dampers were investigated for design parameters such as eccentricity of stiffness and added dampers, the loss factor of the damping materials used. For modal characteristics, variation of the quantities such as natural frequencies, modal damping ratios, modal participation factors, and dynamic amplification factors were observed, and displacements at flexible and stiff edges, and at center of mass were obtained. Based on the results, the problem of the optimum damper distribution to minimize the torsional effects was addressed, and the proposed method for optimum damper distribution was applied to a multi-story structure to verify the applicability Finally the effect of viscous and viscoelastic dampers were compared by varying the loss factor of the viscoelastic material.

• Science of Emotion and Sensibility
• /
• v.18 no.1
• /
• pp.15-26
• /
• 2015

In this paper, amplitude and phase difference patterns for theta and alpha bands of the Evoked Potential(EP) in relation to perform a task at visual stimulus were analyzed using the Empirical mode decomposition(EMD). The EMD is applied to decompose EP signals with task-related sub-frequency band signals. Intrinsic mode function was implied in Hilbert transform and instantaneous amplitude and phase differences of theta and alpha were derived from Hilbert transformed EP. In a task status, large amplitude for both bands was observed at P2, N2, and P3 points as well as maximum phase difference was observed at N1 and P2. We confirmed that both bands are associated with a task at visual stimulus, and less associated with fixation. The proposed method enhances the time and frequency resolution in comparison with band-pass filter method which observed different phase results according to conditions.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.218-219
• /
• 2019

본 논문은 모드 유지 알고리즘이 적용된 직류 배전용 에너지 저장 장치(Energy Storage System, ESS)의 모듈형 운전 제어 기법에 관해 제안한다. 모드 유지 알고리즘은 설정된 방전 깊이(Depth of Discharge, DoD) 내에서 계통의 전력 수요 및 공급의 변화가 생긴 경우에 수시로 변화하는 충/방전 모드의 변경을 제한하는 알고리즘이다. 이를 통해 ESS의 가용 용량을 최대한 사용 가능하며, 계통의 전력 공급 및 부하 수요에 따라 계통의 동작 상태를 결정할 때 도움을 줄 수 있다. 제안한 알고리즘은 PSIM 시뮬레이션을 통해 검증하였다.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.4
• /
• pp.399-410
• /
• 2012

In this study, vibration tests are performed on cantilevered and clamped-clamped laminated composite rectangular plates using experimental modal analysis technique. The damages are simulated by applying progressive line cracks to the laminated composite plates for damage evaluations due to crack growth. The changes of frequency response functions(FRFs), MAC values, and modal parameters (frequency, mode shape and damping ratio) of the damaged composite plates, which are obtained by the modal testing of impact hammer, are investigated. Each experimental modal parameter of the progressively damaged composite plates is compared with natural frequencies and mode shapes obtained by finite element analysis. It is seen that the damage can be evaluated from the changes in the geometric properties and structural behaviors of the laminated composite plates resulting from the model updating process of the finite element model as a benchmark.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.44-45
• /
• 2000

GHz 급의 아주 높은 반복율을 가지면서, 피코초 단위의 펄스 열을 발진시키는 레이저를 만들기 위해 능동형 모드록킹 방법을 이용하였다. 이 방법은 공진기안에 광 변조기를 삽입하고, RF 신호를 가하여 시간적으로 공진기내에서의 손실을 변화시키는 방법이다.$^{(1)}$ 공진기 길이를 충분히 길게 하면서도 고 반복율을 가지는 레이저를 만들기 위해 조화 모드록킹 방법을 사용했는데, 이는 레이저 펄스의 반복율을 공진기 길이에 의한 기본 반복율의 정수배가 되도록 하는 방법이다.$^{(2),(3)}$ 3차 조화 모드록킹 방법을 이용한 Nd:YLF 레이저 시스템을 그림 1에서 나타내었다. (중략)

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.404-406
• /
• 2006

본 논문은 격자구조가 가지는 모드 선택특성과 격자구조의 모양 변화가 산란/투과 모드에 주는 영향을 분석하였다. 구형파 모양의 격자가 정현파 모양으로 달라짐에 따른 산란/투과 모드의 영향을 분석하였으며 이를 이용하여 격자구조의 제작상의 오차를 추적할 수 있을 것으로 사료된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.211-214
• /
• 2009

H.264/AVC의 인트라 예측에서 미리 현재 블록 내의 정보 및 이전 블록의 예측 모드 정보 등을 이용하여 현재 블록의 예측 부호화 블록 크기가 결정되었을 경우, 예측된 블록 크기에 적합한 예측 모드 결정이 요구된다. 이에 사전에 결정된 예측 블록 크기 정보와 주변 블록과의 화소 변화량을 계산하여 예측 모드를 결정하는 기법을 제안하고 성능을 평가한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.67-74
• /
• 2004

As data rate was increased, the conventional burst-mode automatic power control circuit caused errors due to the effort of the mark density variation. To solve this problem we invented a new structured peak-comparator which could eliminate the effect of the mark density variation even in high date rate, and revised the conventional one using it. We proposed a burst-mode automatic power control circuit robust to mark density variations. We found that the peak-comparator in the proposed automatic power control circuit was very robust to mark density variations because it affected very little by the mark density variation in high date rate and in the wide variation range of the reference current and the difference current.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.226-226
• /
• 2003