• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.497-499
• /
• 2013

In this paper, electrical lengths and impedances of a dual-mode resonator are calculated by using the transfer function of a dual-mode resonator by realizing the short-stub. The electrical length of transmission-line for a resonator is function of the frequency and the electrical length of stub is defined by the frequency and impedances of line and stub. Also, the inverter value of a bandpass filter using the dual-mode resonator is calculated. The effect of stub's impedance for inverter is very small. And, as the impedance of line is decreasing, the inverter value is increasing and as the bandwidth is increasing, the inverter value is increasing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.399-404
• /
• 2010

Test results including the variation of propellant-inlet pressure, pulsed thrust, and environment vacuum with the accompanying thermal responses are presented for the pulse-mode operation of a set of monopropellant hydrazine thrusters producing $0.95lb_f$ of nominal steady-state thrust at an inlet pressure of 350 psia. The test data are reduced into the impulse bit, specific impulse, and force centroid that are the factors typically characterizing pulse-mode performance of small rocket engines. With a scrutiny to the performance parameters, their comparison to the reference criteria of 1 lbf standard monopropellant rocket engine are successfully made.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.53-56
• /
• 2011

본 논문에서는 지진시 구조물의 진동을 줄이기 위한 방법으로 모드에너지 기반 신경망 제어 방법을 제안하였다. 모드에너지 기반 신경망 제어 방법은 신경망의 학습 과정에서 구조물의 모드 에너지를 이용하여 목적함수를 구성하며, 이 목적함수를 최소로 하는 학습을 진행한다. 제안된 제어 알고리즘의 적용성을 검증하기 위해서 능동질량감쇠기(AMD, Active Mass Damper)가 설치된 3층 구조물을 예제 모델로 선택하였으며, El Centrol지진을 이용하여 모드에너지기반 신경망제어 알고리즘을 학습시켰다. 모드에너지 기반 신경망 제어 알고리즘의 제어 성능은 학습 후 임의의 지진에 대한 하중으로 California지진을 사용하여 검증하였다. 해석 결과에서 California지진에 대한 제어 전 후의 결과와 기존의 방법인 MLP(Muli-layer Perceptron)의 결과와 비교하였다. 또한 제안된 제어 방법을 적용할 때, 지진시 구조물의 비선형 거동은 제어후 거의 보이지 않는 것을 확인 할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.246-253
• /
• 1996

In this paper, a problem that occurred in the telegraphist equation established by mode conversion method is solved as analysis tapered transmission line is applied to a waveguide taper. After comparing and analyzing the taper function with variant properties, we select on of taper functions not only that is easily designed but also that have good properties. And then we propose the applicant method to design the waveguide taper and deal with the design of mode transducer between rectangular waveguide and circular waveguide. The measured results of scattering coefficients for the mode transducer fabricated with designed data are agreed well with the theoretical results and the validity of the proposed design and analysis method has been confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1198-1206
• /
• 2003

In this paper, a MMIC waveguide mixer module based upon the novel suggested mode converter for wave-guide-to-microstrip transition was fabricated and measured. The insertion and return losses of the mode converter was optimized by compensating the discontinuity effect between ridge and microstrip with the modification of 50 $\Omega$ microstrip line pattern. Due to the low loss nature of the mode converter, a millimeter wave MMIC mixer chip can be successfully applied as a waveguide module for mmW waveguide communication system. The measured results of the module showed the successful MMIC chip application in waveguide and the negligible degradation of the supplied chip specification.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.349-360
• /
• 2006

Controller for doubly-fed induction-type wind generation system should be designed with mechanical power on blade. The controller in this paper consists of upper level controller and lower level controller. The upper level controller determines operating modes according to mechanical input power and calculates proper reference values. There are 4 operating modes - minimum speed control, variable torque control, torque limit control and idle mode. The lower level controller performs current regulated PWM control of rotor-side converter and grid-side inverter. A wind turbine simulator is implemented using doubly-fed induction-type generator and DSP based back-to-back converter to verify the performance of designed controller experimentally.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.71-78
• /
• 1998

The eigenvalue problem is presented for the building with added viscoelastic dampers by using component mode method. The Lagrange multiplier formulation is used to derive the eigenvalue problem which is expressed with the natural frequencies of the building, the mode components at which the dampers are added, and the viscoelastic property of the damper. The derived eigenvalue problem has a nonstandard form for determining the eigenvalues. Therefore, the problem is examined by the graphical depiction to give new insight into the eigenvalues for the building with added viscoelastic dampers. Using the present approach the exact eigenvalues can be found and also upper and lower bounds of the eigenvalues can be obtained.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.4
• /
• pp.25-32
• /
• 2020

A numerical study on combustion instabilities in a model combustor was conducted with various momentum flux ratios. Five ratios are calculated based on an actual operating condition of rocket engine. As momentum flux ratio increases, the spreading angle on the injector outlet decreases. And, as increase of axial momentum flux, pressure fluctuation decreases inside the combustor. By using dynamic mode decomposition method, the acoustic modes inside the combustor are identified. Combustion stabilities are analyzed by comparing the damping coefficient of the 2^nd longitudinal mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1987

In this paper, resonance frequencies of a reentrant cavity are computed by the mode matching method and the mode orthogonality. The reentrant cavity is composed of a coaxial cable and a cylindrical waveguide, so that resonance frequencies of the resonator can be varied by adjusting the length of the inner conductor of a coaxial cable. The result can be applied to numerous microwave devices such as klystron, wavemeter and resonant circuits of a amplifier and to the measurement of dielectric parameters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.282-287
• /
• 1994

본 연구에서는 연구대상 차량의 소음저감 방안을 마련하기 위하여 차체의 진동 및 차실의 음향 특성해석, 연성해석을 수행하였다. 차실 음향특성을 나타내는 음향모드는 유한요소 해석으로부터 결정하였다. 이때 해석결과를 확인하기 위하여 음향모드를 측정, 수치해석결과와 비교하였다. 차실소음의 가진 특성을 갖는 차체의 진동특성은 모드시험을 통해서 결정하였다. 결정된 이들 모드들의 연성해석은 연성해석 전용 컴퓨터 프로그램을 사용하여 수행하였고, 그 결과를 소음실험 결과와 비교하여 Booming 소음에 기여가 큰 차체 panel부위를 결정하였다. 기여가 큰 panel의 진동특성 변경시 소음효과를 측정하여 구조변경 방안을 검토하였다.