• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.230-230
• /
• 2019

대규모순환패턴과 같은 기후시스템에서의 상태와 변화를 정량화하여 나타낸 기상인자는 수문기상학적 변수와 밀접한 연관이 있는 것으로 알려져 있으며, 이에 따라 비정상성 빈도해석의 수행에 있어서 확률분포모형의 매개변수에 대한 공변량으로 널리 활용되고 있다. 본 연구에서는 비정상성 강우빈도해석 시 매개변수의 공변량으로 우리나라의 극치강우의 장기경향성을 잘 반영할 수 있는 기상인자를 선정하고자 한다. 먼저, 시계열자료를 주기성을 가지는 내재모드함수와 장기경향성을 나타내는 잔여값으로 분해할 수 있는 앙상블 경험적 모드분해법을 이용하여 우리나라 전역에 분포된 61개 지점에서 관측된 연 최대치 강우자료의 평균 및 분산에 대한 잔여값을 추출하였다. 다음으로 11개의 월 단위 기상인자에 대한 계절별 연 평균 시계열과 추출된 평균 및 분산의 잔여값과의 상관계수를 산정하였다. 그 결과, 11개의 기상인자 중 Atlantic Meridional Mode (AMM), Atlantic Multi-decadal Oscillation (AMO), North Atlantic Oscillation (NAO)가 우리나라 연 최대치 강우자료의 평균 및 분산에 대한 장기경향성과 높은 상관성이 있는 것으로 나타났다. 계절적으로는 AMM과 AMO의 경우 이전 년도 가을철 평균이 전 지점 평균 약 0.6, NAO는 이전 년도 여름철 평균이 전 지점 평균 0.3 이상의 유의한 상관계수를 가지는 것으로 나타났다.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.79-84
• /
• 2005

To increase the tolerance for passive fiber alignment, a single mode polymer waveguide with a large core structure is demonstrated. The large core waveguide is designed to have a mode profile comparable to that of a thermally expanded core (TEC) fiber, and it can be connected to a high-contrast waveguide through an adiabatic transition taper structure. From a waveguide with a rectangular core of 25 ${\times}$ 25 ${\mu}{\textrm}{m}$$^2$, a single mode propagation is observed when the index contrast is as low as 0.0005. A UV-cured injection molding method is used to fabricate the thick core structure. Due to the large mode size, the insertion loss of the device is below 0.5 dB until the lateral displacement of the TEC fiber is 4.5 ${\mu}{\textrm}{m}$. The low insertion loss is important for reproducible passive alignment.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.292-297
• /
• 2003

A diode-pumped single-mode Nd:YV $O_4$ green laser was developed. Frequency doubling of the laser was achieved by using an intracavity KTP generated green beam (532 nm). By comparing the diode laser spectrum with absorption spectrum of the Nd:YV $O_4$ crystal, we found optimal operating temperature of the diode laser. From output power measured for various mirror curvatures and cavity lengths, we found the optimal matching of TE $M_{00}$ mode with the pump beam gives the best efficiency. When the pump power was 1.9 W, 80 ㎽ of TE $M_{00}$ mode green beam was obtained. We tried to get a single longitudinal mode lasing as the fluctuation of the laser power was caused by the shift of longitudinal modes and the beating between the modes. We tested the intracavity etalon method and birefringent filter method for single mode operation. The etalon method resulted in the best single mode output power of 60 ㎽. The power fluctuation of the single-mode laser was reduced to 1/10 of that of the multi-mode laser.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.93-98
• /
• 2005

STSAT-2 will be launched on December 2007 by the first Korean launch vehicle KSLV-1, and its one of the main instruments is DREAM (Dual Channel Radio Frequency and Environment Atmosphere Monitoring) which detects a signal for atmosphere from the Earth by using micro-wave signal. The STSAT-2 has many units for technology demonstration such as FDSS (Fine Digital Sun Sensor) and DHST (Dual Head Star Tracker) including PPT (Pulsed Plasma Thruster) for attitude control and momentum dumping in the space. In this paper, the power budget analysis for STSAT-2 will be studied and provided for supporting the whole mission life time during the mission of its spacecraft.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.29-36
• /
• 2005

The crustal structure of Korean Peninsula is investigated by analyzing phase velocity dispersion data of Rayleigh wave. Earthquakes recorded by three component seismographs during 1999 - 2004 in South Korea are used in this study. The fundamental mode signals of Rayleigh waves are obtained from vertical components of seismograms by multiple filter technique method and phase match filter method. Velocity dispersion curves of surface waves for 14 propagation paths on the great circle are computed from the fundamental mode signals on the great circle path by two-station method. Treating the shear velocity of each layer as an independent parameter, phase velocities of Rayleigh wave are inverted. The result models are regarded as average structure for surface wave propagation paths respectively. All the results can be explained by an earth model of the Korean Peninsula comprising crust of shear-wave velocity increasing from 2.8 to 3.25 km/sec from top to 33 km depth and uppermost mantle of shear-wave velocity between 4.55 and 4.67 km/sec.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.318-328
• /
• 1993

A series of long wave measurements was made in the region of Shikotan Island (the South Kuril Islands) during 1990-1992: 7 bottom pressure stations were installed in 5 bays and inlets of Shikotan and 3 precise microbarographs were situated at the shore. The observations were taken in order to monitor tsunami waves, estimate resonance features of coastal topography, and investigate seiche generation mechanism. It was found that forced long waves dominate in the motions with periods exceeding 2 hours, freely propagating long waves prevail at periods of 30-120 min and eigen-oscillations of bays (seiches) are the predominant type of long waves at periods less than 30 min. The Helmholtz mode with period 30 min in Krabovaya Bay and 18.5 min in Malokurilskaya Bay is the most important type of wave motion in the inner Shikotan basins. There is a good correlation between passages of atmospheric disturbances and generation of seiches near the coast of Shikotan Island. In particular, jumps in atmospheric pressure excite seiches in different bays simultaneously, in each one with the corresponding dominant period. The atmospheric spectra were remarkably smooth and stable, and could be described by a $\omega$$^{-2}$26/ power law.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.700-708
• /
• 2014

Jet engine modulation(JEM) is a frequency modulation phenomenon of the radar signal induced by electromagnetic scattering from a rotating jet engine turbine. Although JEM can be used as a representative radar target recognition method by providing unique information on the target, its recognition performance may be degraded in the observation range of weakly present JEM. Hence, this paper presents a method for extracting the JEM component by decomposing the radar signal into intrisic mode functions(IMFs) via complex empirical mode decomposition(CEMD) and by combining them based on signal eccentricity. Its application to various signals demonstrated that the proposed method improved the clarity of JEM analysis and could extend the effective observation range of JEM.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.2
• /
• pp.193-203
• /
• 1996

Long period waves were measured at two stations outside and inside Chukpyon Harbor using two pressure-type wave gauges for one week that covers storm sea period. Based on the collected data the characteristics of long-period resonant oscillations were analysed: the resonant period corresponding to the peak spectral density are slightly different from one to the component wave period with the largest amplification ratio, and the latter period is suggested as that of the first resonant mode. From the analysed field data and numerical modeling, the first resonant mode of Chukpyon Harbor region appeared to be around 12 minutes with amplification ratio of 7, whose amplitude varies 10-20 cm inside of the harbour, and also the second mode appeared to be around 6 minutes. The waves of 2-3 minute periods were resonated apparently in the harbour, which is considered to be generated from group-bounded irregular waves and non-linear wave-wave interaction etc. The linearly decreasing reflection coefficients used in the numerical modeling appeared to be an alternative in calculating reflected waves in harbor.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.231.2-231.2
• /
• 2012

원격탐사를 위한 지구관측용 전자광학 카메라는 높은 해상도, 넓은 관측 폭 및 높은 선명도를 제공하기 위하여 부피가 크고 무거우며, 큰 전력을 소모하여, 위성본체의 대부분을 차지하도록 개발된다. 그러나, 달 탐사를 위해 달 궤도선이나 달 착륙선에 장착되는 전자광학 카메라는, 고해상도의 고성능을 가지도록 개발되기 보다는, 다기능의 집적도 높은 소형카메라로 개발되는 것이 일반적이다. 이에 따라, 달 탐사용 다기능 전자광학 카메라 개발을 위한 기술검증을 위하여 지상모델이 개발되었다. 본 카메라는 CMOS 센서를 사용하여 컴팩트하게 설계하였고, 스테레오 영상생성을 위해 두 개의 카메라가 동시에 운영되며, 줌 기능을 구현하여 다양한 조건에서도 영상획득이 가능하도록 설계 되었다. 또한 달 궤도선과 착륙선에서 1D 관측 및 2D 관측이 선택적으로 가능하도록 설계되었다. 개발된 지상모델은 실험실에서 수행하는 통상적인 기능 및 성능시험을 수행하였고, 스테레오 영상의 생성기능 등의 검증을 위하여 야외에서 카메라를 정속으로 회전하며 push broom 방식의 1D 촬영모드에 대한 시험을 수행한다. 또한, 항공촬영을 통해 1D 및 2D 촬영을 수행하여, 영상데이터의 처리 및 스테레오 영상데이터 생성 등의 검증 단계를 거친다. 본 논문 발표에서는 다기능의 전자광학 카메라를 지상에서 동작시켜 실제영상을 뽑아내고, 생성된 데이터를 처리하여, 설계된 카메라의 여러 가지 기능들에 대해 검증하는 방법들에 대해 정리 및 발표한다. 즉, 달 궤도에 맞게 설계된 카메라의 노출시간 등을 조절하고, push broom 방식을 모사하기 위하여 카메라를 정속으로 회전시켜 영상을 획득하여 다양한 카메라의 기능을 검증하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.75.1-75.1
• /
• 2021

MSE (Maunakea Spectroscopic Explorer)는 11.25m 구경의 망원경과 최대 4,000 개의 천체를 한 번에 관측할 수 있는 분광기를 통해 다천체 분광학 연구를 이끌 차세대 관측기기이다. 경희대학교는 망원경에 장착되는 다천체 분광기의 성능 요구사항을 바탕으로 노출 시간 소프트웨어 ETC (Exposure Time Calculator)를 개발하고 있다. ETC는 대기에 의한 연속선 소광, 방출선과 흡수선, 망원경 및 광학 기기의 투과율, 검출기의 암전류와 읽기 잡음을 바탕으로 신호 대 잡음비 S/N (Signal to Noise)을 도출하여 천체를 분광 관측하기 위한 적절한 노출 시간을 계산한다. MSE-ETC는 저분산 LR (Low Resolution, R=3,000), 중분산 MR (Moderate Resolution, R =6,000) 및 고분산 HR (High Resolution, R=40,000)의 관측 모드로 가시광선과 근적외선 영역의 S/N과 파장, 그리고 S/N과 AB등급 간의 상관관계를 보여준다. 본 포스터에서는 개발 중인 MSE-ETC 프로그램의 구조와 작동 알고리즘 및 사용 예를 발표한다.