• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.43-50
• /
• 2007

A range-frequency interference pattern is analyzed in the course of the propagation of ship noise in shallow water. It has been shown to exhibit striated bands of intensity maxima and minima in the spectrogram. The slope of the striations is an invariant of the modal interference and is described by a waveguide invariant parameter $\beta$. It turns out that this interference pattern is useful for identifying the physical properties of the waveguide such as seabed properties. In this article, the interference pattern is analyzed using image processing techniques to produce the distribution of the beta and the effects of sediment types and geoacoustic parameters on beta distribution are examined and characterized by moments of the distributions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.42-46
• /
• 1994

본 연구에서는 프리캐스트 PC 세그멘탈 교량 접합부의 전단거동을 파악하기 위하여 전단키 접합부의 전단거동과 전단강도 특성을 실험적으로 연구하였다. 본 연구를 통하여 접합부 형상에 따른 하중-변위 관계, 균열거동, 파괴모드, 전단강도 등을 규명하고, 접합부의 역학적 거동에 영향을 미치는 여러인자들에 대해 분석한다. 또한 이로부터 최적의 접합부 형상을 도출하고, 이에 따른 최적의 접합방식을 검토함으로써 접합부 설계의 지침과 해석의 근거를 제시한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.17-22
• /
• 1996

차세대원자로의 안전계통 성능향상을 위하여 축압기 설계에서 채택하고 있는 피등적 유량조절 장치인 vortex 밸브의 특성을 분석하였다. 단순화된 해석모델을 이용하여 vortex chamber의 유동 pattern을 분석하였으며 vortex 밸브의 성능에 중요한 영향을 미치는 기하학적 인자들의 영향 유동모드 전환시 주유량이 공급되는 수관의 수위거동 특성을 분석하였다. 또한 3차원 모의가 가능한 FLUENT 코드를 사용하여 vortex chamber의 유동장을 해석하여 vortex 밸브의 유동특성을 분석하였다.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.169-174
• /
• 2000

사용환경에서 발생하는 PC 모니터의 고장을 실험실에서 재현하기 위해 Power On/off, DPM 모드, 사용전압, Surge 유입, Torque 강도 등의 인자에 대해 여러 가지수준으로 직교배열표에 의해 실험한 결과를 토대로 시험 프로세스를 정립하여 제품설계 및 신제품 개발에 이용하였다. 실험결과와 SN 비 계산에 의하면 모니터 수평출력 TR의 고장에 대한 요인은 Mode 절환, Torque, h$_{FE}$ 산포에 유의한 영향이 있었으며, 이에 대한 IQC에서의 부품시험법, Torque 관리, TR 설계 Spec 변경을 제안하였다.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.73-82
• /
• 2016

The energy consumption efficiency in a variety of operational test mode was considered for domestic gas boiler below 70 kW. The energy efficiency test carried out in the experimental conditions similar to the actual operation status was analyzed and compared with the current Korean efficiency test method. Four types of test modes for each boiler(Non-condensing and condensing boiler) were carried out in the condition of laboratory mode(full load, steady state) and actual operating mode. Futhermore divided into two operational status for each of these, it was applied by maximum gas consumption and consumer sales conditions. Test equipment has the function referred to gas boiler standards, such as KS or European standard EN. The equipment should be continuously measured and record the measuring factors which are the flow volume of gas and water, laboratory temperature, water flow volume for heating, return water volume after heating and quantity of the exhaust gases(CO, NO, $NO_2$). The experimental results were found that non-condensing boiler efficiency of laboratory mode is about 10% higher than that of actual mode. In case of condensing boiler, the efficiency of laboratory condition is about 20% higher than that of the actual using conditions. I suggest that the government will gradually take the efficiency test method considering the actual conditions.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.177-186
• /
• 1999

The purpose of this study is to analyze the interface debonding of RC beams strengthened by carbon fiber sheet(CFS). The behavior of damaged RC beams strengthened with CFS is analytically investigated next using linear elastic fracture mechanics(LEFM) approach and the finite element method. The study includes an investigation of the separation mode by interface fracture of the strengthening materials due to the interfacial shear and normal stresses. The numerical method is presented to obtain the value of interfacial fracture parameter such as the strain energy release rate. Based on the results of this study, it is found that the critical case occurs when the interfacial cracks occur within a short region of the flexural crack. The CFS strengthening has not an adequate factor of safety against interfacial debonding of CFS. Furthermore, for the thicknesses of the adhesive studied[1mm~3mm], it is no noticeable effect on the strain energy release rate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.503-508
• /
• 2012

Recently green house gas emission problem has been issued because $CO_2$ emission is known to cause global warming. Hence, introduces more stringent emission and fuel economy requirements in various countries, including Korea. In this research, $CO_2$ emission factor characteristics of in-use cars, which are the most dominant vehicle type in Korea, were studied, and 129 gasoline vehicles, 100 diesel vehicles, and 34 LPG vehicles were tested on a chassis dynamometer. In the tests, CO and $CO_2$ emissions as well as fuel reduction rates weremeasured. The tests were conducted in the CVS-75 mode, which has been considered for developing emission factors for regulating emissions from light-duty vehicles in Korea. Through experiments, correlations among displacement, fuel consumption efficiency, fuel type, mileage, driving pattern, and $CO_2$ emission were investigated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.415-422
• /
• 2010

Development of the reliability-based design program in the GUI environment is inadequate for engineers familiar with the deterministic design to deal with the international design criterion based on the probabilistic design. In this study, the design program based on the GUI environment is developed in order to more efficiently input the design factor and more easily carry out the design works. The GUI environment is the GUIDE (Graphic User Interface Development Environment) tool supported by the latest MATALB version 7.1. In order to test the model reliability, the probabilities of failure (POF) on the breakwater armor block (AB) and gravity quay-wall (QW) in the sliding mode are computed using the model in the Level II and Level III. The POF are 55.4~55.7% for breakwater AB and 0.0006~0.0007% for gravity QW. A non-GUI environment program results of the POF are 55.6% for breakwater AB and 0.0018% for gravity QW. In comparison, the POF difference is negligible for breakwater AB because the exact input design parameters are available, whereas the large POF difference, but within the same order, for gravity QW can be explained by the difference of the input design factors because of the poor input data information.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.120-126
• /
• 2004

In order to understand the temperature dependence of magnetic properties of $F_{84}Nb_{16}$(wt.%) thin films, ferromagnetic resonance experiments have been carried out. The ferromagnetic resonance spectra for all temperatures consist of several volume modes and one (or two) surface modes. It is suggested that both surface of the film have a perpendicular hard axis to the film plane (negative surface magnetic anisotropy). Saturation magnetization coincides with the Block's T$\^$2/3/ and spectroscopic splitting factor is almost constant in the temperature range from 113 K to 293 K. The surface magnetic anisotropy constant K$\_$s2/ of the film-substrate interface increased with decreasing temperature in the temperature range from 233 K to 293 K. The surface magnetic anisotropy constant K$\_$s1/ of the air-substrate interface decreased from -0.322 erg/$\textrm{cm}^2$ to -0.394 erg/$\textrm{cm}^2$ as the temperature decreased to 253 K and was almost constant below 233 K.233 K.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.6-11
• /
• 2014

To optimize the design of fuel cylinder for LNG vehicles, we introduced the design parameters of the inner and the outer tank of the vessel support structure by analyzing the structural characteristics of conventional design. We selected the inner and outer diameter of the hollow support bars and a dimension of the inner structure of the vessel among the design parameters for design optimization. In this study the temperature distribution and thermal stress of the support structure were evaluated by using the utility program as MSC/MARC. The evaluation criteria are first mode natural frequency, total transferred energy through support structure and thermal stress. The developed design satisfied the design criteria and it was made of prototype. The prototype was verified through three-dimensional vibration testing and thermal performance test.