• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.777-784
• /
• 2017

Energy harvesting through a thermoelectric module normally makes use of the temperature gradient in the system's operational environment. Therefore, it is difficult to obtain the desired output power when the system is subjected to an environment in which a low temperature gradient is generated across the module, because the power generation efficiency of the thermoelectric device is not optimized. The utilization of solar energy, which is a form of renewable energy abundant in nature, has mostly been limited to photovoltaic solar cells and solar thermal energy generation. However, photovoltaic power generation is capable of utilizing only a narrow wavelength band from the sunlight and, thus, the power generation efficiency might be lowered by light scattering. In the case of solar thermal energy generation, the system usually requires large-scale facilities. In this study, a simple and small size thermoelectric power generation system with a solar concentrator was designed to create a large temperature gradient for enhanced performance. A solar tracking system was used to concentrate the solar thermal energy during the experiments and a liquid circulating chiller was installed to maintain a large temperature gradient in order to avoid heat transfer to the bottom of the thermoelectric module. Then, the setup was tested through a series of experiments and the performance of the system was analyzed for the purpose of evaluating its feasibility and validity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1167-1174
• /
• 2009

In the monitoring of a patient in a sickroom, not only the physiologic and environmental data of the patient, which is automatically measured, but also the clinical data(clinical chart)of the patient, which is drew up by a doctor or nurse, are recognized as important data. However, since in the current environment of a sickroom, clinical data is collected being divided from the data that is automatically measured, the two data are used without an effective integration. This is because the integration of the two data is difficult due to their different collection times, which leads the reconstruction of clinical data to be remarkably uncertain. In order to solve these problems, a method to synchronize the continuous environmental data of a sickroom and clinical data is appearing as an important measure. In addition, the increase of use of small machines and the development of solutions based on wireless communications provide a communication platform to the developers of health care. Thus, this paper realizes a remote system for taking care of patients based on a web that uses mobile phones. That is, clinical data made by a nurse or doctor and the environmental data of a sick room comes to be collected by a collection module through a wireless sensor network. An observer can see clinical data and the environmental data of a sickroom through his/her mobile phone, integrating and storing his/her data into the database. Families of a patient can see clinical data made by hospital and the environment of the sick room of the patent through their computers or mobile phones outside the hospital. Through the system,hospital can provide better medical services to patients and their families.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.613-621
• /
• 2016

This research connected network equipment, including CCTV, PAGA, IP-PBX, and Legacy, in order to enable the operation and configuration of internal IP-based network equipment in maritime plants and vessels, both in the field and from remote places, and to allow for the support of remotely controlling such equipment. It also realized an operating program for the integrated network equipment management system to enable the monitoring and control of equipment status, operation condition, and notifications from distant places. By applying the operating program to satellite stations and vessels sailing on the sea, a performance test was conducted to evaluate data loss and transmission/reception delay in the communication section between the land and vessels. As a result, this research verified the normal operation of CCTV control and of real-time monitoring and control of the network equipment, including PAGA, IP-PBX, and Legacy under the FBB and MVSAT environments. It was observed that the transmission of CCTV video images with a large volume of data as well as the transmission and reception of voice data were found to be slightly delayed, indicating the need to develop technology to compress and convert data for real-time transmission and reception.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.1
• /
• pp.24-37
• /
• 2001

This paper deals with our experience for the design and implementation of Transport and Session managers in the Integrated Streaming Service Architecture (IS SA) that was developed by the authors. The ISSA is a streaming framework that allows to develop integrated multimedia streaming applications such as VOD system in unicast/multicast and real-time broadcastOive-cast). It also facilities standard real-time transport protocols such as RTp(Real-Time Transport Protocol)/RTCP(Real-time Control Protocol) and RTSP(Real-Time Streaming ProtocoD that allows to user openness. The ISSA supports diverse media fonnats and is independent from underlying networks and operating systems, and compatible with the global real-time multimedia database system (BeeHive) so that streaming media are efficiently retrieved, stored, and serviced. The role of the Transport Manager is to do packetization and depacketization for the different types of multimedia data and delivers the packetized media data in real-time. The Transport Manager uses RTP protocol. The role of the Session Manager is to establish and control the media channel by using RTSP protocol and to deliver the database transactions for the multimedia database by using RTTP(Real-Time Transaction Protocol) protocol. Both the Transport and Session Manager are doing their functions through the network interface in the ISSA that allows developers to various network programming interfaces and provides flexibility to the system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.590-595
• /
• 2016

The US is pursuing a plan to raise the subsidies for electric vehicles by more than 30%. The number of electric vehicles in Europe is expected to be one million by 2020 and 2030 and there are plans to expand in the center of Germany to supply six million electric vehicles on the dissemination and development policies. The development of the electric vehicle is not simply a technical trend but there is the potential to improve the access to this technology and the possibility of changing the entire social system and long-term energy security. Domestic competition is also increasing the supply of electric vehicles, as new blue ocean markets are emerging. The current domestic On-board Charger (Home Charger) plans to be suspended from the 2015 government-sponsored installation, This paper on the IEC 61851-1 and IEC 61851-22 specifications analyzes the development of a midnight electricity charger as a low-cost algorithm, the decrease in price and the improved convenience of the On-board Charger for Bluetooth module with the ATmega128 existing charger system, and the UI configuration via the LCD Panel to a Smartphone app are proposed.

• Journal of KIISE:Software and Applications
• /
• v.33 no.9
• /
• pp.787-801
• /
• 2006

Ontology merging describes the process of integrating two ontologies into a new ontology. How this is done best is a subject of ongoing research in the Semantic Web, Data Integration, Knowledge Management System, and other ontology-related application systems. Earlier research on ontology merging, however, has studied for developing effective ontology matching approaches but missed analyzing and solving methods of problems of merging two ontologies given correspondences between them. In this paper, we propose a specific ontology merging process and a generic operator, T-MERGE, for integrating two source ontologies into a new ontology. Also, we define a taxonomy of merging conflicts which is derived from differing representations between input ontologies and a method for detecting and resolving them. Our T-MERGE operator encapsulates the process of detection and resolution of conflicts and merging two entities based on given correspondences between them. We define a data structure, MergeLog, for logging the execution of T-MERGE operator. MergeLog is used to inform detailed results of execution of merging to users or recover errors. For our experiments, we used oriental philosophy ontologies, western philosophy ontologies, Yahoo western philosophy dictionary, and Naver philosophy dictionary as input ontologies. Our experiments show that the automatic merging module compared with manual merging by a expert has advantages in terms of time and effort.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.17-23
• /
• 2020

This paper proposes a simulation model using an equivalent circuit for the development of an MMC system. The MMC has been chosen as the most suitable topology for high voltage power transmission, such as a voltage-type HVDC, and it has dozens to hundreds of sub-modules in the form of a half-bridge or full-bridge connected in series. A simulation study is essential for the development of an MMC algorithm. On the other hand, it is virtually impossible to construct and implement MMC simulation models, including hundreds or thousands of switching devices. Therefore, this paper presents an MMC equivalent model, which is easily expandable and implemented by modeling the dynamic characteristics. The voltage and current equation of the equivalent circuit was calculated using the direction of the arm current and switching signal. The model was implemented on Matlab/Simulink. In this paper, to show the validity of the model developed using Matlab/Simulink, the simulation results of a five-level MMC using the real switching element and the proposed equivalent model are shown. The validity of the proposed model was verified by showing that the current and voltage waveform in the two models match each other.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.699-708
• /
• 2006

Bus splitting technique reduces bus energy by placing modules with frequent communications closely and using necessary bus segments in communications. But, previous bus splitting techniques can not be used in MPSoC platform, because it uses cache coherency protocol and all processors should be able to see the bus transactions. In this paper, we propose a bus splitting technique for MPSoC platform to reduce bus energy. The proposed technique divides a bus into several bus segments, some for private memory and others for shared memory. So, it minimizes the bus energy consumed in private memory accesses without producing cache coherency problem. We also propose a task allocation technique considering cache coherency protocol. It allocates tasks into processors according to the numbers of bus transactions and cache coherence protocol, and reduces the bus energy consumption during shared memory references. The experimental results from simulations say the bus splitting technique reduces maximal 83% of the bus energy consumption by private memory accesses. Also they show the task allocation technique reduces maximal 30% of bus energy consumed in shared memory references. We can expect the bus splitting technique and the task allocation technique can be used in multiprocessor platforms to reduce bus energy without interference with cache coherency protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1556-1564
• /
• 2011

The increased life expectancy of human due to the advance of medical techniques has led to many social problems such as rapidly aging populations, increased medical expenses and a lack of medical specialists. Thus, studies on improving the quality of life with the least amount of expense have been going on by incorporating advanced technologies, especially for Personal Health Devices (PHDs), into the medical service market. However, compatibility and extensibility among manufacturers of PHDs have not been taken into account in most of the researches done on the development of PHDs because most of them have been supported by individual medical organizations. The interoperability among medical organizations can not be guaranteed because each medical organization uses different format of the messages. Therefore, in this paper, an expansion module that can enable commercially-available non-standard PHDs to support the IEEE 11073, and a smart-phone-based manager that can support easy and comprehensive management on receiving and transmitting the collected data from each PHD using IEEE 11073 standard were developed. In addition, a u-health system that can transmit the data collected in the manager using the standard data format HL 7 to medical center for real-time medical service from every medical institutions that support this standard was designed and developed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.1
• /
• pp.11-17
• /
• 2015

The increase of international and domestic trade according to global industrialization and economic growth has raised the national logistic cost in connection with physical distribution of articles. In order to reduce these costs and rise up national industrial competitiveness, Korea has also tried to improve the efficiency of logistics with various methods as advanced countries did. Especially, Korea government has decided standard dimension of pallets with T11 ($1100{\times}1100mm$) on the basis of unit load system in early 2000s, and certification program for logistics equipments has been operated to keep up the compatibility for the equipments and packaging with modulation of T11. Consequently, this certification program has contributed to extend standardization for logistics and to grow up 3 party logistics, but compared with advanced countries, the rate of national logistics cost to GDP (gross domestic product) still shows about 3% gap as demands for certification have been decreased in the recent. In this study, therefore, we proposed the development of logistics certification system based on social needs as a policy device to activate logistic industry as well as improve the efficiency of national logistics after we had analyzed all of certification programs for logistics being run in Korea. Namely, the first is the development of certification project for Northeast Asia's logistics corresponding to necessity for applying returnable transport system according to increasing the amount of trade between Northeast Asia's countries. The second is the development of certification project for safe transportation of packaging corresponding to costumer's needs for safe transit according to the growth of electronic commerce and the increase of global distribution.