• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.99-104
• /
• 2005

This paper describes the measurement and analysis of the basic line constants in PLC(Power Line Communication) in the residential building. An apartment is considered as one of the conventional residences to get the line constants in this paper, Agilent 4263B LCR Meter is used to measure the detailed values each area and the specific results and averaged analysis data are shown in the tables. The measured results are a little bit different from the calculated values using conventional formula due to the line arrangement, neglected factors, complex permittivity, and etc. This paper describes many kinds of lines and wiring figures of domestic construction. It can be utilized with the analyzed line characteristics in frequency domain as a planning reference of PLC.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.29-34
• /
• 2002

In this paper, we present a new geometric active contour model based on level set methods introduced by Osher and Sethian for detection of object boundaries or shape and we adopt anisotropic diffusion filtering method for removing noise from original image. In order to minimize the processing time, we use the narrow band method which allows us to perform calculations in the neighborhood of the contour and not in the whole image. Using anisotropic diffusion filtering for each slice, we have the result with reduced noise and extracted exact shape. Volume rendering operates on three-dimensional data, processes it, and transforms it into a simple two-dimensional image.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.120-122
• /
• 2004

평판 스위치 전극에 인가되는 전압 변화에 따라서 전극 앞에서의 플라즈마 전위의 변화를 측정하고, 이를 이용하여 형성된 전계의 변화를 관찰하였다. 대부분 스위치 전각에 인가되는 펄스는 펄스 인가시간, 플래토(plateau)시간, 펄스 회복시간으로 구성되어 이들 세 가지 시간 구간에 따라서 전위의 변화를 측정하여 형성되는 전계를 관찰하였다. 빠른 방전 스위치의 동작특성을 이해하기 위하여 스위치 전극인가 전압의 인가시간 변화와 이에 따른 전압 변화율 및 인가전압의 크기에 따른 플라즈마 쉬스의 거동을 관찰하고, 그 크기가 펄스 변화율과 크기에 따라 변화함을 찾았다. 펄스의 회복시간 동안에 돌아오는 플라즈마 쉬스의 거동은 펄스의 인가시간동안의 변화와 유사한 거동을 보였으며 이때에도 펄스 회복율이 중요한 인자임을 알 수 있었다. 만일 펄스 변화율이 커서, 전극 앞에서의 쉬스의 거동 속도가 플라즈마 이온의 음속보다 빠르게 변할 때는 이온 매트릭스 쉬스의 거동형태를 따르고, 변화율이 늦어서 쉬스의 거동 속도가 이온의 음속보다 느리게 변하는 경우에는 Child-Langmuir 쉬스의 형태가 시간에 따라 전개됨을 알 수 있었다. 펄스 특성을 정량적으로 관찰할 수 있도록 스위치 전극에 흐르는 전류의 크기를 계산하기 위해 필요한 모델을 개발하여 실험견과와의 비교를 통하여 펄스 시간동안 플라즈마의 거동이 스위치를 흐르는 전류에 미치는 영향을 연구하였다.

• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.421-434
• /
• 2007

Among many other CG generated natural scenes, the representation of ocean surfaces is one of the most complicated and time-consuming problem because of its large extent and complex surface movement. We present a hybrid method to represent and animate unbound deep-water ocean surfaces by utilizing graphics processor as both simulation and rendering core. Our technique is mainly based on spectral approaches that generate a high-detailed height field using Fourier transform on a 2D regular grid. Additionally, we incorporate Gerstner model and generate low-detailed height field on a 2D projected grid in order to represent large waves and main structure of ocean surface. There is no interruption between CPU and GPU, and no need to transfer simulation results from the system memory to graphics hardware because the entire simulation and rending processes are done on graphics processor. As a result we can synthesize and render realistic water surfaces in real-time. Proposed techniques are readily adoptable to real-time applications such as computer games that have heavy work load on CPU but still demand plausible natural scenes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.72-79
• /
• 2003

A numerical calculation was conducted to estimate and to elucidate the role of the radiative heat flux from metal particles(Al, $Al_2O_3$) on the dynamic extinction of solid propellant rocket where the rapid depressurization took place. Anon-linear flame modeling implemented by the residence time modeling for metalized propellant was adopted to evaluate conductive heat flux to the propellant surface. The radiative heat feed back was calculated with the aid of a modified comvustion-flow model as well. The calculation results with the propellant of AP:Al:CTPB=76:10:14 had revealed that the radiative heat flux is approximately 5~6% of total flux at the critical depressurization rate regardless of chamber geometry (open or confined chamber). It was also found that the dynamic extinction in open geometry could be predicted at the depressurization rate about 45% larger with radiative heat feedback than without radiation. Thus, it should be claimed that even a small amount of radiative flux 5~6% could produce a big error in predicting the critical depressurization rate of the metalized propellant combustion.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.3
• /
• pp.31-39
• /
• 1999

In this paper, numerical experiment is attempted to analyze and compare the combustion efficiency of the burning sprays due to OFO, FOF triplet / FOOF split doublet injectors. Preconditioned Wavier-Stokes equation system with low Reynolds number $\kappa$-$\varepsilon$ model for turbulence closure, is LU-SGS time-integrated. Spray processes are modeled by DSF analysis with experimentally determined injection characteristics. n-heptane/air global reaction model approximates the combustion for simplicity, and the influence of turbulence on the chemical reaction is included using eddy dissipation model. The results showed the FOF triplet injector of highest combustion efficiency, whereas the OFO type of poet performance. It was also observed that the droplet mean diameter and the average gas temperature due to the mixing efficiency, are the representative parameters for the performance design of combustion.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.12
• /
• pp.560-567
• /
• 2008

In this paper, we discuss a simple and straightforward binarization procedure which can generate black/white comics from the video frame image. Generally, the region of human's skin is colored white or light gray, while the dark region is filled with the irregular but regular patterns like hatching in most of the black/white comics. Note that it is not enough for simple threshold method to perform this work. Our procedure is decoupled into four processes. First, we use bilateral filter to suppress noise color variation and reserve boundaries. Then, we perform mean-shift segmentation for each similar colored pixels to be clustered. Third, the clustered regions are merged and extended by our region extension algorithm considering each color of their regions. Finally, we decide which pixels are on or off using by our dynamic binarization method based on the HSV color model. Our novel black/white cartooning procedure was so successful to render comic cuts from a well-known cinema in a resonable time and manual intervention.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.194-194
• /
• 2012

본 연구에서는 자연하천에서 Rhodamine-WT를 이용하여 추적자 실험을 수행하고 이를 바탕으로 오염사고대응예측모델에 대한 검증을 실시하고자 하였다. 최근 국내에서는 다양한 형태와 규모의 수질오염사고가 매년 수십건 이상 발생하고 있으며, 따라서 수치모형 기반의 수질오염 사고 대응 예측시스템에 대한 높은 신뢰성이 요구되고 있다. 수질사고에 노출되어 있는 지표수를 각종 용수로서 안전하게 공급하기 위해서는 정확한 수질예측이 필수적이며, 이를 위해서 수십 년간 연구되어 온 수질모델을 오염사고 대응예측시스템에 적합하도록 정확성과 신뢰성을 갖추기 위한 연구가 진행되어야 한다. 수치 모형을 이용한 물질의 이송 및 확산 모의에서는 오염물질 도달시간과 확산 농도를 결정하는 것이 가장 중요한 요소이므로 이송 및 확산 모의에 대한 검증 기법 개발 및 적용이 필요하다. 본 연구에서는 낙동강수계 지류하천인 감천에서 추적자 실험을 4회 실시하여 측정한 수리량과 농도 실측치를 이용하여 분산계수를 종 횡분산계수 산정이 가능한 2차원 유관추적법을 적용하여 산정하였다. 각 단면에 유속은 ADV-3차원 유속계인 Flow-Tracker를 사용하여 도섭으로 측정하였으며 하천의 흐름 방향의 직각으로 측선을 설치하고 펌프를 이용하여 채수를 한 다음 Rhodamie WT의 농도를 측정하였으며 측선의 위치 보정은 GPS를 통하여 보정하였다. 측정 자료를 이용하여 2차원 유관추적법으로 분산계수를 산정한 결과 각각의 측선에 따라서 다소 차이가 발생하였으며, 일부 구간에서는 이론식으로 계산한 분산계수와 근사한 값이 나타났다. 이는 사주가 매우 발달하고 만곡이 많은 실험구간의 특성상 Elder와 Fischer 식으로 계산한 값과 차이가 발생할 가능성이 높은 구간이기 때문인 것으로 판단된다. 또한 하폭에 대한 수심비가 커질수록 분산계수도 증가하고 평균유속에 대한 전단유속에 비에 비례하는 것으로 나타났다.

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.21-27
• /
• 2010

This paper presents a numerical simulation of the radar backscattering from oil spills on ocean surface. At first, a one-dimensionally rough sea surface is numerically generated for a given wind speed at HEBEI SPIRIT accident. Then, an oil-spilled sea surface is represented with a two-layered medium, which is generated by adding a thin low-dielectric oil layer on the randomly-rough highdielectric sea surface. The backscattering coefficients of various oil-spilled sea surfaces are obtained using the Method of Moments and Monte Carlo technique for various surface roughness, oil-layer thicknesses, frequencies, polarizations and incidence angles. The numerical method is verified with theoretical models for simple structures. The reduction of the backscattering coefficients due to the lowdielectric oil-layers on sea surfaces has been analyzed. These numerical results will help to detect any oil spills on sea surfaces, and consequently, to classify SAR images.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.4
• /
• pp.15-23
• /
• 2002

In most cryogenic liquid rocket engines, liquid oxygen manifold and injector are not thermally insulated from room temperature environment fur reducing system complexity and the weight. This feature of cryogenic liquid rocket engine results in the situation that cryogenic liquid oxygen flow is easy to be vaporized especially in the vicinity of the manifold and the injector wall. The research in this paper is focused on two-phase flow phenomena of liquid oxygen in rocket engine. Vapor fraction was estimated by comparing the measured two-phase flow pressure drop in engine manifold and the injector with ideal single phase pressure drop. Heat flux into cryogenic flow is estimated by measuring the wall temperature on the engine manifold to examine boiling characteristics. Suitable correlations for cryogenic two-phase flow were also reviewed to see their applicability. In addition, the effect of vapor generation in liquid rocket engine manifold and injector on engine performance and stability was considered.