• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.163-172
• /
• 2017

Porous insulation have been frequently used in a number of industries by minimizing thermal insulation space because of excellent performance of their thermal insulation. This paper devices an effective thermal conductivity prediction model. First of all, we perform literature survey on traditional effective thermal conductivity prediction models and compare each other model with heat transfer experimental results. Furthermore this research defines advanced effective thermal conductivity prediction models model based on heat transfer experimental results, the Zehner-Schlunder model. Finally we verify that the newly defined effective thermal conductivity prediction model has better performance prediction than other models. Finally, this research performs a transient heat transfer analysis of thermal protection system with a porous insulation using the finite element method and confirms validity of the effective thermal conductivity prediction model.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.418-421
• /
• 2002

최근 소프트웨어 위기를 극복하기 위한 객체지향 개발 방법론의 한계성이 나타남에 따라, 컴포넌트 기반의 소프트웨어 공학에 대한 연구가 활발히 진행되고 있다. 효율적인 컴포넌트 재사용을 위해서는, 컴포넌트 개발 시 하나의 컴포넌트 개발에 집중하기보다는 공통된 특징을 공유하는 컴포넌트 패밀리 개발에 초점 을 맞추어 야 한다. 본 논문에서 는 컴포넌트 패밀리 구축을 위한 도메인 공학과 특성 모델(Feature Model)을 기반으로, XML 명세서를 받아들여 사용자가 원하는 컴포넌트를 자동 생성하는 컴포넌트 코드 생성기와 재사용 프로세스를 제안한다. 컴포넌트 재사용자가 특정 컴포넌트 패밀리 의 특성 모델에 서 필요한 특성을 선택하면 컴포넌트 코드 생성기는 재사용자의 목적과 환경 에 적합한 코드를 자동 생성한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.6
• /
• pp.667-672
• /
• 2003

In this paper, we propose a systematic method for intelligent digital redesign of a fuzzy-model-based controller for continuous-time nonlinear dynamical systems which may also contain uncertainties. The continuous-time uncertain TS fuzzy model is first constructed to represent the uncertain nonlinear systems. An extended parallel distributed compensation(EPDC) technique is then used to design a fuzzy-model-based controller for both stabilization and tracking. The designed continuous-time controller is then converted to an equivalent discrete-time controller by using an integrated intelligent digital redesign method. This new design technique provides a systematic and effective framework for integration of the fuzzy-model-based control theory and the advanced digital redesign technique for nonlinear dynamical systems with uncertainties. Finally, The single link flexible-joint robot arm is used as an illustrative example to show the effectiveness and the feasibility of the developed design method.

• Journal of Korea Spatial Information System Society
• /
• v.1 no.2 s.2
• /
• pp.81-98
• /
• 1999

The purpose of this study is to provide a common model and implementation strategies for reusing GIS components in local governments. The common model includes several solutions to remove stumbling blocks step by step in reusing or exchanging GIS application systems between local governments. Elements of the model are component architecture, common business process model, common function model, and data model. The elements are the minimum standards for reusability. In order to realize the desirable common model at present, however, the following problems remain : usable components are insufficient in spatial domains and existing GIS application systems require reinvestment to accommodate the new component technology. Three questions are raised to maximize reusability from a monolithic structure toward layered and the componentized GIS application systems : (1) How can the application systems be reused within a local government?, (2) Can the systems be exchanged when they are in the same computing platform?, and (3) When the systems are componentized by standardized interfaces, are the components replaceable between the systems in local governments? Some strategies are presented to accomplish the objectives implicated in the questions. For the actual implementation, several issues such as evaluation procedures for component products, ownership and commercialization issues, will be brought up in the future. Central and local governments, and commercial party need to co-operate each other to maximize the reusability. Reducing overlapping investments in local governments and obtaining competitive component technology in the commercial party should be recognized as critical tasks for the more efficient and economical GIS implementation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.2
• /
• pp.89-99
• /
• 1997

Although discontinuously reinforced metal matrix composite(MMC) is one of the most promising materials for applications of aerospace, automotive industries, the thermal residual stresses developed in the MMC due to the mismatch in coefficients of thermal expansion between the matrix and the fiber under a temperature change has been pointed out as one of the serious problem in practical applications. There are very limited nondestructive techniques to measure the residual stress of composite materials. However, many difficulties have been reported in their applications. Therefore it is important to establish analytical model to evaluate the thermal residual stress of MMC for practical engineering application. In this study, an elastic model is developed to predict the average thermal residual stresses in the matrix and fiber of a misoriented short fiber composite. The thermal residual stresses are induced by the mismatch in the coefficient of the thermal expansion of the matrix and fiber when the composite is subjected to a uniform temperature change. The model considers two-dimensional in-plane fiber misorientation. The analytical formulation of the model is based on Eshelby's equivalent inclusion method and is unique in that it is able to account for interactions among fibers. This model is more general than past models to investigate the effect of parameters which might influence thermal residual stress in composites. The present model is to investigate the effects of fiber volume fraction, distribution type, distribution cut-off angle, and aspect ratio on thermal residual stress for in-plane fiber misorientation. Fiber volume fraction, aspect ratio, and distribution cut-off angle are shown to have more significant effects on the magnitude of the thermal residual stresses than fiber distribution type for in-plane misorientation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.48-55
• /
• 2002

An Internet-based software called the Repair Advisory Service (RAS) was developed to assist aircraft composite repair. The RAS takes advantage of the web user interface and provides estimation of the failure loads of repaired composite laminates and Structural Repair Manual (SRM) with search capability. In this paper, a failure model of lap repair is discussed as an example of the modules in the RAS. The model takes into account anisotropy of each ply in the laminate and in the repair ply, and non-elastic behavior of the interlayer between the laminate and the repair patch. Failure loads calculated by the model were compared with test data, and a good agreement was found between the results of the model and the test.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.5
• /
• pp.520-525
• /
• 2003

This paper concerns a design methodology of observer-based output-feedback digital controller for Takagi-Sugeno(TS) fuzzy systems using intelligent digital redesign (IDR). The term of IDR involves converting an analog fuzzy-mode-based controller into an equivalent digital one in the sense of state-matching. The considered IDR problem is viewed as convex minimization problems of the norm distances between linear operators to be matched. The stability condition is easily embedded and the separations principle is explicitly shown.

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.26-34
• /
• 2016

In a number of industries, porous insulations have been frequently used, reducing thermal insulation space through excellent performance of the thermal insulation's characteristics. This paper suggests an effective thermal conductivity prediction model. Firstly, we perform a literature review of traditional effective thermal conductivity prediction models and compare each model with experimental heat transfer results. Furthermore, this research defines the effectiveness of thermal conductivity prediction models using experimental heat transfer results and the Zehner-Schlunder model. The newly defined effective thermal conductivity prediction model has been verified to better predict performance than other models. Finally, this research performs a transient heat transfer analysis of a thermal protection system with a porous insulation in a high speed vehicle using the finite element method and confirms the validity of the effective thermal conductivity prediction model.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.43-48
• /
• 2000

중간 및 하부 대규권의 열적 상태에 대한 결과들의 상대적인 정확성을 평가하기 위하여 대기대순환 모델의 재분석(1980-93년) 그리고 세 종류의 위성관측 자료들(1980-97년)을 태평양, 한반도 부근에 대한 시.공간 분석으로 상호 비교하였다. 중간 대류권 온도를 반영하는 위성자료는 본 연구에서 유도된 Microwave Sounding Unit (MSU) 채널2 직하점 밝기온도(MSU2)와 Spencer and Christy(1992a)가 전체 주사자료를 사용하여 유도된 채널2 밝기 온도(SC2)이고, 하부 대류권 온도를 반영하는 위성자료는 Spencer and Christy(1992a)가 유도한 것이다(SC2R). 또한, 모델 자료는 ECMWF 재분석 온도이며, 위성관측 자료와의 비교를 위하여 재구성되었다. 한편, 각 위.경도 격자에서 위성관측과 모델 재분석의 월평균 값들의 상관도 전구적으로 조사하였다. 세 종류의 관측 자료들 간의 상관은 중.고위도에서 높았으나(r$\geq$0.9), 저위도 그리고 대류가 활발한 열대 서태평양 및 콩고강 부근에서 낮았다(r~0.65). 특히 SC2R에 대한 다른 자료의 상관이 상대적으로 낮았다. 이는 하부 대류권의 열적 상태를 반영하는 SC2R이 수적 및 지표방출의 영향으로 잡음을 크게 내포하기 때문인 것으로 추정되었다. 관측들과 모델 온도에 대한 월평균과 아노말리 값의 분석에서 시.공간 변동은 대체로 유사하였다. 관측 및 모델 자료는 열대 태평양 이외의 지역에 대한 월평균 값 모드1에서 연주기를 보였으나, 열대 태평양의 경우 모드2에서 보였다. 열대 태평양의 MSU2 모드1은 Walker 순환에 의한 동.서 대비를 보인 반면, 다른 위성관측과 모델 자료에서는 이러한 형태가 현저하지 않았다. 이 지역의 아노말리 값 모드2에서 위성관측들은 엘리뇨 기간에 적도를 중심으로 열대 동태평양 부근에서 아령모양의 대칭 형태를 보였으나 모델 결과에서는 이러한 특징이 약하였다. 관측과 모델 모두는 열대 태평양에 대한 아노말리 값의 모드 1,2에서 엘니뇨와 라니냐에 의한 경년변동을 뚜렷하게 보였다.

• Annual Conference on Human and Language Technology
• /
• 2013.10a
• /
• pp.77-81
• /
• 2013

본 논문은 두 가지 주제에 대해 연구한다. 첫 번째는 수학식 검색에 대한 것이다. 웹에는 양질의 수학식 데이터가 마크업 언어 형태로 저장되어 있으며 이를 활용하기 위한 연구들이 활발히 진행되고 있다. 본 연구에서는 MathML (Mathematical Markup Language)로 저장된 수학식 데이터를 일반 질의어를 이용하여 검색한다. 두 번째 주제는 토픽 모델(topic model)로 검색 성능을 향상시키는 방법에 대한 것이다. 먼저 수학식 데이터를 일반 자연어 문장으로 변환한 후 Indri 시스템을 이용하여 검색을 수행하고, 토픽 모델을 이용하여 미리 산출된 스코어를 적용하여 검색 순위를 재랭킹한 결과, MRR 기준 평균 5%의 성능을 향상시킬 수 있었다.