• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.8
• /
• pp.181-188
• /
• 2016

Recently, as the amount of spatial information increases, an interest in the study of spatial information processing has been increased. Spatial database systems extended from the traditional relational database systems are difficult to handle large data sets because of the scalability. SpatialHadoop extended from Hadoop system has a low performance, because spatial computations in SpationHadoop require a lot of write operations of intermediate results to the disk, resulting in the performance degradation. In this paper, Spatial Computation Spark(SC-Spark) is proposed, which is an in-memory based distributed processing framework. SC-Spark is extended from Spark in order to efficiently perform the spatial operation for large-scale data. In addition, SC-Spark based on the GPGPU is developed to improve the performance of the SC-Spark. SC-Spark uses the advantage of the Spark holding intermediate results in the memory. And GPGPU-based SC-Spark can perform spatial operations in parallel using a plurality of processing elements of an GPU. To verify the proposed work, experiments on a single AMD system were performed using SC-Spark and GPGPU-based SC-Spark for Point-in-Polygon and spatial join operation. The experimental results showed that the performance of SC-Spark and GPGPU-based SC-Spark were up-to 8 times faster than SpatialHadoop.

• Journal of Science Education
• /
• v.44 no.2
• /
• pp.240-258
• /
• 2020

The advances in science technology brought about a new form of learning called flipped-learning: a combination of on-line and off-line learning. A flipped learning is a form of blended learning which has become quite popular, nowadays, in the field of education. Despite the emphasis on the importance of medical humanities in medical education program, there are no effective teaching and learning models to realize the purpose of medical humanities education. This study explores the possibility of flipped-learning to apply medical humanities classes. The class was designed based on the ADDIE model consisting of five stages, analysis - design - development - execution - evaluation. In order to do 'flipped-learning,' the instructor reconstructs the purpose of medical humanities education, instructional purpose and content, and analyzed learner. The contents of the medical humanities class were structured considering the purpose of the introduction to the medical humanities in the medical education program and the competencies that medical personnel should have in the developed health care environment. The instructor produces a video of the lecture and makes it possible to use LMS (Learning Management System) before and after classes, and conducts discussion activities so that learner-learner and learner-teacher interaction could actively occur during the class. The result of applying medical humanities lesson as flipped learning is as follows: First, it can realize the essence of medical humanities education. Second, it contributes to strengthening the competencies of health care provider. Third, flip learning can be used as a new teaching strategy for medical humanities education. The result of this study is expected to suggest new ways of introduction to teaching method in the traditional medical humanities class and contribute to the practice of designing and doing flipped learning of medical humanities class in the future.

• Applied Microscopy
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2009

GM-CSF is a multipotent growth factor, which also plays an important role during the process of wound healing. rrhGM-CSF was specifically produced from rice cell culture in our laboratory (Hanson Biotech Co., Ltd, Daejeon). The rrhGMCSF contains more oligosaccharide side chains than any other types of GM-CSF. This work was taken to evaluate the influence on wound healing of rrhGM-CSF in male golden hamsters. Full thickness skin defects of 9 mm in diameter were made in the back of hamsters, and 100 ${\mu}L$ ointment containing rrhGM-CSF 50 ${\mu}g/mL$ was applied. Control groups were given ointment without rrhGM-CSF. The wound sizes were relatively reduced and skin was well regenerated in the experimental group compared with the control group. Structurally, reepithelialization and architecture of the skin following injury were well accomplished in the experimental group. And also, positive reaction of PCNA of the skin following injury was more prominent in rrhGM-CSF containing ointment treatment group. Since this type of GM-CSF has highly glycosylated side chains, the effectiveness might be retain longer and stable, regarding acceleration of wound healing in the animal model. The present study has important implications for further development of the therapeutic manipulation of wound healing using rrhGM-CSF.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.15-28
• /
• 2015

As personal devices and pervasive technologies for interacting with networked objects continue to proliferate, there is an unprecedented world of scattered pieces of contextualized information available. However, the explosive growth and variety of information ironically lead users and service providers to make poor decision. In this situation, recommender systems may be a valuable alternative for dealing with these information overload. But they failed to utilize various types of contextual information. In this study, we suggest a methodology for context-aware recommender systems based on the concept of contextual boundary. First, as we suggest contextual boundary-based profiling which reflects contextual data with proper interpretation and structure, we attempt to solve complexity problem in context-aware recommender systems. Second, in neighbor formation with contextual information, our methodology can be expected to solve sparsity and cold-start problem in traditional recommender systems. Finally, we suggest a methodology about context support score-based recommendation generation. Consequently, our methodology can be first step for expanding application of researches on recommender systems. Moreover, as we suggest a flexible model with consideration of new technological development, it will show high performance regardless of their domains. Therefore, we expect that marketers or service providers can easily adopt according to their technical support.

• Journal of Information Technology Services
• /
• v.1 no.1
• /
• pp.57-66
• /
• 2002

We are looking at the two different kinds of IT on this paper. One is VoIP and the other is VR (voice recognition). We are more interesting at the evolving techniques and services produced by combining the two techniques mentioned above. Recently, there are so many services and products appeared in the market using voice recognition technique. Now the technique has progressed on the level that can even replace the user interfaces using the QUI or general DTMF. Therefore, we are expecting so many various new services showed UP In the market which is combination of the VoIP and VR. Up until now, three models are available in the field which are wired telephone, wireless telephone, and wireless internet. We know the effectiveness of the VoIP is maximized more when this technique is combined with others rather than used alone without other techniques.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.228-228
• /
• 2007

전력선 통신용 비접촉식 커플러는 고속형(2~30 MHz)과 저속형(100~450KHz)으로 나누어 볼 수 있는데, 고속형은 현재 국내에서 독자적으로 개발되어 다양한 모델이 적용되고 있는 상황이지만, 저속형은 시작품수준으로 제조되어 있으나 신호전송 특성의 향상절구가 필요한 상황이다. 전력선 통신용 커플러는 전력선 또는 모뎀으로 통신신호를 전달하는 기능을 하는 것으로서, 전력선 통신을 위한 핵심부품이다. 따라서 본 연구에서는 100~450 KHz 대역에서 사용 가능한 저속형 비접촉식 커플러를 제조하기 위해, 권선조건, 대전류형 자심재료의 모의 해석, 노이즈 필터조건, 임피던스 매칭, 하우징방법 등의 각 공정 변수를 확립하고자 하였다. 자심재료의 모의해석에서 자심재료의 높이와 전력선 도체 단면적 변화는 자심재료의 전류포화특성에 영향을 미치지 않으며, 유효길이와 에어-갭 크기가 증가할수록 전류포화특성은 향상되는데, 자심재료의 내경이 64 mm일 때 자심재료의 폭((외경-내경)/2)은 15 mm 이상이어야 하고, 에어-갭은 약 $600\;{\mu}m$ 정도의 에어-갭을 형성시켜야함을 확인할 수 있었다. 또한 저속용 비접촉식 커플러 제조조건 실험에서 내경${\times}$외경${\times}$높이가 $64{\times}94{\times}140mm$인 자심재료를 이용하여 권선 수와 에어-갭을 각각 3회, $400{\sim}600\;{\mu}m$ 삽입했을 때, 가장 우수한 특성을 나타내었다. 그리고 저역 통과 필터를 출력부에 내장하여 통신신호 이외의 노이즈를 제거할 수 있었다. 본 연구에서 제조된 300 A급 지중선용 저속형 비접촉식 커플러는 내경${\times}$외경${\times}$높이가 $58{\times}1144{\times}158mm$이고, 100~450 KHz 통신대역에서 약$7{\pm}2dB$의 삽입손실을 나타내었다.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.97-111
• /
• 2009

Image-based traffic information collection systems have entered widespread adoption and use in many countries since these systems are not only capable of replacing existing loop-based detectors which have limitations in management and administration, but are also capable of providing and managing a wide variety of traffic related information. In addition, these systems are expanding rapidly in terms of purpose and scope of use. Currently, the utilization of image processing technology in the field of traffic accident management is limited to installing surveillance cameras on locations where traffic accidents are expected to occur and digitalizing of recorded data. Accurately recording the sequence of situations around a traffic accident in a signal intersection and then objectively and clearly analyzing how such accident occurred is more urgent and important than anything else in resolving a traffic accident. Therefore, in this research, we intend to present a technology capable of overcoming problems in which advanced existing technologies exhibited limitations in handling real-time due to large data capacity such as object separation of vehicles and tracking, which pose difficulties due to environmental diversities and changes at a signal intersection with complex traffic situations, as pointed out by many past researches while presenting and implementing an active and environmentally adaptive methodology capable of effectively reducing false detection situations which frequently occur even with the Gaussian complex model analytical method which has been considered the best among well-known environmental obstacle reduction methods. To prove that the technology developed by this research has performance advantage over existing automatic traffic accident recording systems, a test was performed by entering image data from an actually operating crossroad online in real-time. The test results were compared with the performance of other existing technologies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.319-330
• /
• 2016

Recently, 3D printing technology has been applied to make a concept model and working mockup of an industrial application. On the other hand, this technology has limited applications in industrial products due to the materials and reliability of the 3D printed product. In this study, the components of a full cord switch module are proposed as a case of a 3D printed component that can be used as a substitute for a short period. These are hub-driven and lever lockup components that have the structural characteristics of breaking down frequently in the emergency operating status. To ensure the structural strength for a substitute period, research of structure optimization was performed because 3D printing technology has a limitation in the materials used. After optimizing the structure variables of the hub-driven component, reasonable results can be drawn in that the safety factors of the left and right switching mode are 1.243 (${\Delta}153.67%$) and 3.156 (${\Delta}404.96%$). The lever lockup component has a structural weak point that can break down easily on the lockup-part because of a cantilever shape and bending moment. The rib structure was applied to decrease the deflection. In addition, optimization of the structural variables was performed, showing a safety factor of 7.52(${\Delta}26%$).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.810-814
• /
• 2004

This research was conducted to evaluate the safety of the herbicide-resistant rice, a genetically modified organism (GMO) developed by the Rural Development Administration by exposing it to 12 months old Sprague-Dawley rats for 8 weeks. The composition of herbicide-resistant brown rice with/without heating treatment was compared with those of conventional Ilpum brown rice with/without heating treatment to assess composition equivalence. Compositional analysis was performed to measure proximates, fiber, and minerals. The nutritional components of herbicide-resistant rice were similar to those of the nontransgenic control or were within the normal range of nontransgenic rice. Four groups of experimental male rats were fed one of the following diets for eight weeks: Ilpum brown rice (I) and its heated rice (IH) as non-GMO, and herbicide-resistant brown rice (G) and its heated rice (GH) as GMO- We checked clinical symptoms (anorexia, salivation, diarrhea, polyuria, anuria, fecal change), food intake, and water consumption every day, change of body weight once a week, and serum biochemistry and organ weights after 8 weeks of experimental feeding We did not find any significant differences in the above-mentioned items. These results suggested that genetically modified herbicide-resistant rice was compositionally equivalent to conventional Ilpum rice, and nutritional characteristics and safety of herbicide-resistant rice in old male rats treated for 8 weeks were not different from those of Ilpum rice, non-GMO.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.289-298
• /
• 2008

An algorithm was developed to retrieve both cloud optical thickness and effective particle radius considered the aerosol effect on clouds. This study apply the algorithm of Nakajima and Nakajima (1995) that is used to retrieve cloud optical thickness and effective particle radius from visible, near infrared satellite spectral measurements. To retrieve cloud properties, Look-up table (LUT) was made under different atmospheric conditions by using a radiative transfer model. Especially the vertical distribution of aerosol is based on a tropospheric aerosol profile in radiative transfer model. In the case study, we selected the extensive forest fire occurred in Russia in May 2003. The aerosol released from this fire may be transported to Korea. Cloud properties obtained from these distinct atmospheric situations are analysed in terms of their possible changes due to the interactions of the clouds with the aerosol particle plumes. Cloud properties over the East sea at this time was retrieved using new algorithm. The algorithm is applied to measurements from the MODerate Resolution Imaging Spectrometer (MODIS) onboard the Terra spacecrafts. As a result, cloud effective particle radius was decreased and cloud optical thickness was increased during aerosol event. Specially, cloud effective particle radius is hardly greater than $20{\mu}m$ when aerosol particles were present over the East Sea. Clouds developing in the aerosol event tend to have more numerous but smaller droplets.