• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.426-427
• /
• 2016

본 논문에서는 Unmaned Aerial Vehicle(UAV)를 이용하여 양식어장에 유입될 수 있는 적조 모니터링에 대한 연구를 실시하였다. 적조는 한반도 주변 해역을 포함한 전 세계 연안 지역에서 물고기의 집단 폐사, 해안구조물에 대한 물리적 손상등과 같이 사회 경제적인 피해를 야기 시켜왔고, 최근 해수면 온도상승과 같은 기후 변화에 의한 영향으로 증가되고 있는 실정이다. 특히 남해안과 같이 생활하수가 다량 유입되고 저층에 퇴적된 영양물질이 용출되는 곳에서 상습적으로 발생한다. 1995년에 발생한 코클로디니움에 의한 적조는 764억원의 기록적인 피해를 입히면서, 적조에 대한 신속한 대응과 효과적인 방제작업의 필요성이 대두되었다. 이렇게 양식어장 운영에 다양한 문제가 발생이 된 후 대응하는 것보다 모니터링을 통해 사전에 유입을 차단하고 대처하는 연구가 필요하고 판단된다. 원격탐사를 활용한 적조 탐지 및 모니터링 연구는 UAV에서 취득한 RGB color 영상을 통한 적조 추출 및 분석, 시계열 분석을 위한 영상자료 수집, 현장관측 자료와 위성영상에서 추출한 클로로필 농도 비료글 통해 이루어 졌다. 또한 매년 발생하는 적조생물에 관한 속성정보를 통해 적조발생지역에 대한 적조생물종과 국내 연안에서 발생한 적조의 발생 범위 등의 정보를 지리정보기반에 의한 공간분석을 실시하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.278-279
• /
• 2017

북한 대부분이 미계측 지역으로서 자연재해 연구의 기초 데이터인 기상정보가 매우 부족한 실정이다. 이러한 지역은 천리안 기상위성 등 원격탐사 기술을 활용하여 재해 모니터링을 하여야한다. 천리안 기상위성은 기상청에서 운영하는 강우 알고리즘을 이용하면서 재해예측 보다는 일반적인 강우 예보에 중점을 두고 있다. 따라서 기상청 강우 알고리즘은 35 mm/hr를 초과하는 강우에 대해서는 탐지를 하지 못하므로 홍수위험 모니터링에 적합하지 않다. 본 연구에서는 이러한 문제를 해결하기 위해 기존의 천리안 강우강도 알고리즘에 GPM 위성 산출물(L3)과 같은 다중센서 자료를 적용하여 홍수유발 강우까지 측정할 수 있는 추정기술을 개발하였다. 개발된 강우 추정기술은 한국의 기상관측지점 94개소 자료와 비교 검증했을 때, 상관계수가 0.6 이상으로 기존의 알고리즘보다 개선된 강우를 추정할 수 있었다. 따라서 기존의 천리안 강우강도 알고리즘에서 추정하지 못했던 집중호우나 태풍의 강우강도를 정확하게 추정할 수 있으므로 미계측 지역의 홍수위험 모니터링에 도움이 될 것이다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2011.10a
• /
• pp.173-174
• /
• 2011

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.231-242
• /
• 2017

Monitoring of facilities such as roads, dams and bridges is important for their long-term sustainable usage. It has usually suffered with safety and cost problems, which makes more frequent monitoring difficult. As an efficient and economicalsolution to these problems, one may consider the use of smartphone to capture the status of the facilities. To derive quantitative analysis results with the smartphone images for facility monitoring, one should first rectify the images in a way as automatic and economical as possible. In thisstudy, we propose such a rectification method, which rectifiessmartphone images acquired from arbitrary locations based on reference images.In the proposed method, we determine the camera extrinsic parameters of each smartphone images using the reference imagesrather than ground control points, and project the image to the target surface of the facility based on the determined camera parameters. The method were applied to test data acquired from a small dam toward water-area facility monitoring. The experimental results showed that the camera extrinsic parameters were determined with the accuracy of 5 cm and $0.28^{\circ}$ in the position and attitude. The accuracy of the distance measured from the rectified image was evaluated to 10 cm. With the rectified images, one can accurately determine the location and length of the target objects required for facility monitoring.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2006

Geological storage of captured $CO_2$ is a new way of reducing greenhouse gas emissions to protect the climate, but is based on the established technology associated with injection of fluids underground. The geological formations of interest for this technique include operational and depleted oil and gas fields, and deep saline aquifers. Prediction of storage performance will depend on models of the behaviour of $CO_2$ in geological formations; these need to be refined and verified, and methods of monitoring developed and proved. These needs can be met through monitored demonstration and research projects. Current commercial projects that are demonstrating $CO_2$ storage include Sleipner, Weyburn, ORC, and In Salah; research projects include West Pearl Queen, Nagaoka, and Frio. In this paper, some of the monitored injection projects are described. The reservoirs employed for storing $CO_2$, and the associated monitoring techniques, are briefly reviewed. It is argued that small-scale research projects, used to develop techniques and prove models, are complementary to the large-scale monitored injections that will establish the viability of this technique for mitigating climate change.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.311-323
• /
• 2023

Oil spill accidents can cause various environmental issues, so it is important to quickly assess the extent and changes in the area and location of the spilled oil. In the case of oil spill detection using satellite imagery, it is possible to detect a wide range of oil spill areas by utilizing the information collected from various sensors equipped on the satellite. Previous studies have analyzed the reflectance of oil at specific wavelengths and have developed an oil spill index using bands within the specific wavelength ranges. When analyzing multiple images before and after an oil spill for monitoring purposes, a significant amount of time and computing resources are consumed due to the large volume of data. By utilizing Google Earth Engine, which allows for the analysis of large volumes of satellite imagery through a web browser, it is possible to efficiently detect oil spills. In this study, we evaluated the applicability of four types of oil spill indices in the area of various land cover using Sentinel-2 MultiSpectral Instrument data and the cloud-based Google Earth Engine platform. We assessed the separability of oil spill areas by comparing the index values for different land covers. The results of this study demonstrated the efficient utilization of Google Earth Engine in oil spill detection research and indicated that the use of oil spill index B ((B3+B4)/B2) and oil spill index C (R: B3/B2, G: (B3+B4)/B2, B: (B6+B7)/B5) can contribute to effective oil spill monitoring in other regions with complex land covers.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.179-195
• /
• 2002

This paper examined the applicability of geophysical prospecting for water leakage detection of the water utilization facilities. Electrical resistivity survey and spontaneous-potential survey were carried out for the water leakage detection of dike and embankment, and the applicability was confirmed from many case studies. However, in order to efficiently maintain and detection of the more accurate water points in the embankment, the efficiently maintain and detection of the more accurate water leakage points in the embankment, the requirements are as follows; 1) It is necessary to use the electrical resistivity survey jointly with the spontaneous-potential survey in order to improve the reliability of water leakage information. 2) It is important to understand physical properties of the soil which influences the electrical resistivity of embankment in order to accurately grasp the water leakage points from the result of the electrical resistivity survey. 3) It is necessary to introduce the three-dimensional prospecting in order to improve the reliability of the measured value. 4) Introductions of the monitoring measurement system are necessary in order to efficiently and economically maintain of the water utilization facilities.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.137-151
• /
• 2019

Geophysical exploration techniques are effective for monitoring changes in the ground condition around the excavation project to prevent subsidence risks during excavation work, therefore, improving analysis techniques is required for applying and supplementing various geophysical exploration technologies. In this study, a field-scale on-site test was conducted to detect possible ground subsidence hazards and areas of relaxation zone that may occur during excavation work and due to underground water level changes. In order to carry out the field test, a real-scale excavation test bed was constructed and the geophysical exploration methods, such as electrical resistivity survey and multi-channel analysis of surface wave (MASW) survey for urban sites condition, have researched for optimal geophysical exploration parameter, design and correlation analysis between the results by reviewing the validity of each individual geophysical exploration and modeling. The results of this study showed the impact of each geophysical exploration on the relaxation zone and, in particular, the location of the underground water surface and the effects of excavation were identified using electrical resistivity survey. Further research on modeling will be required, taking into account the effects of excavation and groundwater.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.90-94
• /
• 2008

1999년과 2002년 각각 Terra와 Aqua센서를 탑재하여 발사된 MODIS 위성은 36개의 분광밴드, 250m, 500m, 1km에 이르는 다양한 공간해상력 및 주.야간 각 2회의 촬영을 통하여 전 세계에서 발생되고 있는 다양한 지구환경 및 변화를 연구하는데 사용되고 있다. NASA MODIS Science Team에서는 이를 위해 44개에 이르는 표준 product를 정의하여 알고리즘 처리 결과를 웹사이트를 통해 제공하고 있다. 또한 우리나라의 경우에도 한국항공우주연구원, 기상청, 국립수산과학원등에서 MODIS자료를 직수신하여 분석 및 활용하고 있다. 본 연구에서는 이러한 MODIS 자료를 활용하여 한반도 국토모니터링을 위한 자료 획득 및 처리 시스템 설계에 대한 연구를 하고자 한다. 이를 위해 한반도 일대의 MODIS 자료를 직수신하고 있는 기관으로부터 KREONet을 이용하여 준 실시간으로 영상자료를 획득 및 저장하도록 설계하였다. 또한 자료의 분석 및 처리를 위한 관련된 MODIS 표준 product를 살펴보고 이를 분석처리 할 수 있는 시스템 구성에 대해 제시하고자 한다.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2017

This study investigated the effectiveness of Unmanned Aerial Vehicle (UAV) and 3D modeling on mine reclamation monitoring. The high spatial resolution of 3.8 cm ortho-mosaic image and Digital Elevation Model (DEM) are constructed based on UAV air survey. The ortho-mosaic image effectively shows mine reclamation activities and recognize objects and topological changes in the image. The comparative analysis of 3D models between UAV based DEM and report based DEM reveals that total amount of $268,672m^3$ additional dumping of contaminated soil is equivalent to 710,000 ton. It concludes that a UAV based survey enables high accuracy spatial information extraction for mine reclamation activities with high efficiency. It is expected that UAV survey will be very effectively used for preliminary data acquisition and project monitoring for mine reclamation activities.