• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.384-389
• /
• 1997

고분자 촉매 담체인 스티렌-디비닐벤젠의 제조시 중합반응 개시제의 함량에 따른 영향과 반응기의 재질에 따른 영향을 수소흡착실험을 통하여 확인하였다. 담체의 중합반응시 제조조건이 동일하다 할지라도 개시제의 함량에 따라서 담체의 기공 특성이 달라지므로 개시제의 함량은 모노머 양의 1%를 사용한 시료가 수소흡착능이 가장 좋은 것으로 나타났다. 반응기의 재질은 teflon으로 직접 제조한 것보다는 teflon으로 코팅 처리한 것이 더 수소흡착능이 좋은 것으로 확인되었다.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.935-941
• /
• 1998

New type of chitosan deriertives was synthesised by graft copolymerization of mono(2-methacryloyl oxyethyl) acid phosphate into chitosan. The reaction conditions showing the highest percentage of grafting were an initiator concentration of $3.5{\times}10^{-3}M$, monomer concentration of 0.19 M, and reaction temperature of $40^{\circ}C$, while rate of grafting showed same value after elapsing 4hours of reaction time. The antifungal activity of chitosan depending on content of free amine and kind of monomer was examined against Candida albicans, Trichophyton rubrum and Trichophyton uiolaceum by shake flask method. The pH value of buffer solution to show the highest antifungal activity was 5.75, and the selectivity of mold strain was observed.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.182-188
• /
• 2001

Thin films of $SiO_xC_y$ deposited by means of PECVD(plasma enhanced chemical vapor deposition) using HMDSO(hexamethyldisiloxane)/$O_2$ were characterized. The effects of deposition conditions such as RF power, oxygen flow rate and hydrogen flow rate on the chemical bond structure, atomic composition, surface roughness and wear characteristics of the films were investigated by means of FTIR, XPS, AFM and Hazemeter. The deposition rate of $SiO_xC_y$ was greater than 100 nm/min, which is relatively high rate. The XPS results showed that the carbon content in a deposited film was lower than that of previous studies where different organosilicone materials were used. The optimum wear resistance was attained when RF power was 200 Watt and oxygen flow rate was 100 sccm. This study implies that the $HMDSO/O_2$ system is effective in forming a film with a lower carbon content and good abrasion resistance.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.71-71
• /
• 2011

전류를 흘렸을 때 양극과 음극에 따라 움직이는 미세한 나노입자를 이용하여 색, 글자, 그림 등을 표시하는 응용디스플레이 기술이 전기영동디스플레이(electrophoretic display)이다. 최근 전자종이 등 상품화가 진행되면서 전기영동디스플레이에 대한 관심증대와 함께 기술개발이 지속적으로 진행되고 있다. 본 연구에서는 분산중합을 이용하여 $TiO_2$ core 입자에 polystyrene을 shell로 코팅하여 마이크로캡슐형의 전기영동디스플레이에 적합한 입자를 제조하고 성능을 분석하였다. 먼저 분산제의 종류, 모노머의 농도, 개시제의 농도에 따라 제조된 대전복합입자의 크기 및 분포를 보면, 분산제의 종류를 달리 하였을때를 제외하고 대체로 균일하였다. 입경의 변화를 보면, 약 200-300nm의 $TiO_2$가 개질에 의해 400-500nm의 입경을 나타내는 것으로부터 200nm 두께의 shell층을 갖는다는 것을 확인 할 수 있었다. 또한 분산제의 종류에 따라서는 분산제를 사용하지 않는 경우가 오히려 제조된 입자의 분포가 균일함을 알 수 있었고 모노머의 농도에 따른 변화는 볼 수 없었으며 입경분포가 균일한 입자가 제조되었음을 알 수 있었다. 대전복합입자의 TGA 곡선으로부터 $300^{\circ}C$ 부근에서 polystrene shell에 의한 분해를 볼 수 있었고 $600^{\circ}C$ 이후에 잔류된 core의 $TiO_2$ 입자를 확인 할 수 있었다. 이 결과로부터 $TiO_2$ core-polystyrene shell형의 전자 종이용 대전복합입자의 제조를 확인 할 수 있었다. 또한 제조된 대전복합입자의 zeta potential을 보면, (+)전하를 띄며 64.8mV의 비교적 높은 zeta potential을 가지는 것을 확인 할 수 있었다. 그리고 $TiO_2$ 대전복합입자와 같은 방법으로 제조된 흑색 대전복합입자를 혼합하여 cell test를 측정한 결과, cell에 ${\pm}$10V의 저전압을 가했을 때에도 비교적 응답속도가 빠른 입자의 구동현상을 확인 할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.178-185
• /
• 1999

For the process control of silicon nitride gelcasting, the composition effect of acryamide system on the viscosity of slip and mechanical property of gelcast green body were investigated. The slip was prepared by ball milling of silicon nitride suspension prepared with acrylamide monomer and polyelectrolyte dispersant after premixing them by attritor. The slip mixed with initiator was vacuum deaired and cast into molds, and then polymerized. The consolidated green body was obtained by drying the gelated slip. The viscosity measument and the diametral compression test was done to evaluate the rheological behaviro of slip and mechanical property of gelcast body, respectively. Experimental results showed that the high solid loading of silicon nitride slip was obtained up to 46 vol% with a low viscosity. The mechanical property of gelcast body mainly increased with increasing the concentration of monomer. The gelcast body was machinable above the ∼3 MPa of tensile strength. The relative density of pressured-sintered body was 98.5% at 1760$^{\circ}C$, 3 h.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.313-322
• /
• 2004

Thick film photolithography is a new technology in that the lithography process such as exposure and development is applied to the conventional thick film process including screen-printing. In this research, low-temperature cofireable silver paste, which enabled the formation of thick film fine-line using photolithographic technology, was developed. The optimum composition for fine-line forming was studied by adjusting the amounts of silver powder, polymer and monomer, and the additional amount of photoinitiator, and then the effect of processing parameter such as exposing dose on the formation of fine-line was also tested. As the result, it was found that the ratio of polymer to monomer, silver powder loading, and the amount of photoinitiator were the main factors affecting the resolution of fine-line. The developed photosensitive silver paste was printed on low-temperature cofireable green sheet, then dried, exposed, developed in aqueous process, laminated, and fired. Results showed that the thick film fine-line under 20$\mu\textrm{m}$ width could be obtained after cofiring.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.136-144
• /
• 1996

Polyacrylic super absorbent polymer(SAP) containing sorbitol was synthesized by inverse-suspension polymerization method. Sodium acrylate and acrylic acid were used as a monomer, ethylene glycol dimethacrylate(EGDMA) and glycerol polyglycidyl ether(GPGE) were used as a crosslinking agent, potassium persulfate(PPS) was used as an initiator, and cyclohexane was used as a solvent. Content of sorbitol was from 10mol% to 50mol% according to the mol ratio of acrylic acid monomer. The size distribution of the round shaped polymeric particle was $177{\sim}707{\mu}m$. Absorption amount of the polymer containing sorbitol was 785 to 1086 times of the polymer weight in distilled water, was 50 to 83 times in 0.9 % NaCl solution. Absorption and retention amount of the polymer were decreased with increasing the amount of sorbitol, but the polymer has an endothermic property which is +5 cal/g SAP.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.249-255
• /
• 2013

Hydroxypropyl terminated PDMS was synthesized by the hydrosilylation reaction with allyl alcohol in the presence of Karstedt's catalyst. And them, an one-pot reaction with HDI isocyanurate trimer and hydroxyethyl methacrylate was conducted to give a silicone-modified urethane acrylate oligomer (PUA oligomer) having 9000 g/mol, weight average molecular weight. The synthesized PUA oligomer was characterized by using FT-IR and GPC. The UV-curable coatings were prepared by PUA oligomer blending with a reactive monomer (phenylthioethyl acrylate) under the different mole ratios. It was found that the refractive index of cured film increased when the reactive monomer was added but there was no relationship between the refractive index and amount of reactive monomer. Also, their transmittance for cured films was not change as increasing the content of reactive monomer.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.210-219
• /
• 2014

In this study, the acrylic pressure sensitive adhesive (PSA) for the optical functionality sheet was prepared by blending liquid isoprene rubber. The acrylic PSA was synthesized with butyl acrylate, acrylic acid, 2-ethylhexyl acrylate and 2-hydroxyethyl methacrylate. Toluene was used to a solvent for polymerization. Liquid isoprene rubber (LIR-50) was blended with the acrylic PSA and blend ratio was 0 ~ 50 wt%. According to the results, the adhesive transfer, which was the big problem of acrylic adhesive, was reduced with the addition of LIR-50. The secondary bonding of LIR-50 with substrate did not occurred due to absence of polar group in LIR-50. The peel strength and adhesive transfer were decreased by UV curing and the degreed of decrease depended on the amounts of photoinitiator and UV irradiation time. On the other hand holding power increased drastically by increasing amounts of photoinitiator and UV irradiation time.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.771-776
• /
• 2016

The acrylate copolymer having good thermal stability, coating and adhesion properties was designed and prepared. We prepared copolymers in >95% high yield using methyl methacrylate, isobornyl methacrylate and 2-hydroxyethyl methacrylate monomers by the bulk and emulsion polymerization techniques. The $^1H$-NMR spectrum was used to identify chemical structure and glass transition temperatures increased from $123^{\circ}C$ to $140^{\circ}C$ confirmed by DSC, DMA and TGA analysis. In addition, as the content of IBMA increased, storage modulus and thermal decomposition temperature increased. As the content of IBMA increased from 10% to 30% in the composition for the entire monomer, tensile strength increased from 22 to 30 MPa in both polymers prepared by bulk and emulsion techniques. The contact angle increased from 70 to up to 88 degrees due to hydrophobic property of IBMA.