• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.150-153
• /
• 2014

영상 표시 장치에서 대조 이미지의 왜곡 현상을 보완하기 위해 히스토그램 평활화(Histogram Equalization)와 플래토 평활화(Plateau Equalization)가 사용된다. 히스토그램 평활화(Histogram Equalization)를 이용하여 명암대비를 증가 시킬 경우 과도한 이미지의 밝기 변화에 따른 과포화 현상이 발생하며 실시간 시스템에서는 물체 추적에 왜곡 현상이 발생한다. 특히, 적외선 영상(infrared image)과 같이 명암비가 한쪽으로 치우쳐 있는 영상들을 명암비를 개선하기 위해서는 플래토 평활화(Plateau Equalization)와 같은 영상 개선 방법이 필수적이다. 플래토 평활화에서는 임계값을 사용하는 방법이 제시되고 있지만 실험에 의한 최적 임계값을 찾아내는 방식이며, 이 방법은 입력되는 새로운 영상마다 임계값을 실험에 의해 매번 반복해서 도출해야 문제점이 있다. 본 논문에서 제안하는 방법은 과포화 되는 이미지 영역의 문제를 해결하기 위해 제시하는 방법으로 히스토그램 평활화(Histogram Equalization)의 동적 분할하는 알고리즘에 근거하되, 입력 영상에따라 적응적으로 임계값을 설정하는 기법을 제안한다. 실험을 통해 제안하는 방법이 실시간 영상에서 기존의 동적분할 히스토그램에 비해 자연스럽게 명암비를 개선하여 과포화 되거나 중요한 정보를 누락하여 왜곡 되지 않게 자연스러운 화면을 재생하는 방법을 제안한다.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.269-275
• /
• 2008

Although MR imaging is generally applicable to depict knee joint deterioration it, is sometimes occurred to mis-read and mis-diagnose the common knee joint diseases. In this study, we employed magnetization transfer ratio (MTR) method to improve the diagnosis of the various knee joint diseases. Spin-echo (SE) T2-weighted images (TR/TE 3,400-3,500/90-100 ms) were obtained in seven cases of knee joint deterioration, FSE T2-weighted images (TR/TE 4,500-5,000/100-108 ms) were obtained in seven cases of knee joint deterioration, gradient-echo (GRE) T2-weighted images (TR/TE 9/4.56/$50^{\circ}$ flip angle, NEX 1) were obtained in 3 cases of knee joint deterioration, In six cases of knee joint deterioration, fat suppression was performed using a T2-weighted short T1/tau inverse recovery (STIR) sequence (TR/TE =2,894-3,215 ms/70 ms, NEX 3, ETL 9). Calculation of MTR for individual pixels was performed on registration of unsaturated and saturated images. After processing to make MTR images, the images were displayed in gray color. For improving diagnosis, three-dimensional isotropic volume images, the MR tristimulus color mapping and the MTR map was employed. MTR images showed diagnostic images quality to assess the patients' pathologies. The intensity difference between MTR images and conventional MRI was seen on the color bar. The profile graph on MTR imaging effect showed a quantitative measure of the relative decrease in signal intensity due to the MT pulse. To diagnose the pathologies of the knee joint, the profile graph data was shown on the image as a small cross. The present study indicated that MTR images in the knee joint were feasible. Investigation of physical change on MTR imaging enables to provide us more insight in the physical and technical basis of MTR imaging. MTR images could be useful for rapid assessment of diseases that we examine unambiguous contrast in MT images of knee disorder patients.

• Clean Technology
• /
• v.14 no.2
• /
• pp.136-143
• /
• 2008

The objective of this study is to investigate the visibility of plume at the Y power plant stack, which fires the orimulsion as a fuel. The plume contains numerous primary particles under $1\;{\mu}m$ size and inorganic ions possibly inferred by the chemicals of secondary aerosol formation. We evaluated the visibility of the plume using the modified PLUVUE-II model. The monitoring data on the particle size distribution (PSD) and secondary aerosols of sulfate were applied to estimate and evaluate the main factors of plume opacity. The chemical reactions were applied to the model for the secondary aerosol formation of $(NH_4)_2SO_4(s)$. The maximum plume length was estimated by an optic method using threshold contrast. The results showed that the plume length was strongly dependent upon the PSD and $(NH_4)_2SO_4(s)$ concentration of the plume emitted from the stack.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.114-124
• /
• 2006

The purpose of this study was to evaluate the tooth color changes of resin bonding sites and their adjacent sites on orthodontic bracket bonding. Sixty extracted sound premolars were used and the tooth color was recorded according to the CIE $L^*a^*b^*$ color system using a spectrophotometer. The tooth colors of the twenty premolars were measured and compared before bracket bonding and after removal. On a further twenty premolars, the tooth color was measured before and after only primer application. In the change of $L^*$ values, according to the bracket bonding and primer application, the lightness was decreased, and in the change of $a^*\;and\;b^*$ values, the color was changed into a more yellowish color The color differences $({\Delta}E^*)$ were calculated from the $L^*a^*b^*$ values and compared with the standard value of clinical detection $({\Delta}E^*=3.7)$. The color differences between before the bracket bonding and after removal noted exceeded the standard value and those of between before and after the primer application were not larger than the standard value. Toothbrushing was performed after application of the primer to evaluate the color changes according to the primer abrasion. As a control, toothbrushing was performed on the last twenty premolars. The color differences noted were larger than the standard value after toothbrushing. Also, to evaluate the color changes of the tooth which is exposed to sun irradiation after bracket removal, additional photoaging was performed and the color was measured for all teeth. The additional color differences after photoaging were smaller than the standard value. The above results suggest that the tooth color changes after fixed orthodontic treatment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.40-47
• /
• 2009

This paper proposes a method for vehicle license plate detection using mathematical morphology and symmetry. In general, the shape, color, size, and position of license plate are regulated by authorities for a better recognition by human. Among them, the relatively big intensity difference between the letter and the background region of the license plate and the symmetry about the plate are major discriminating factors for the detection. For the first, the opened image is subtracted from the closed image to intensify the region of plate using the rectangular structuring element which has the width of the distance between two characters. Second the subtraction image is average filtered with the mask size of the plate. Third, the column maximum graph of the average filtered image is acquired and the symmetry of the graph is measured at every position. Fourth, the peaks of the average filtered image are searched. Finally, the plate is assumed to be positioned around the one of local maxima nearest to the point of the highest symmetry. About 1,000 images taken by speed regulation camera are used for the experiment. The experimental result shows that the plate detection rate is about 93%.