• The KIPS Transactions:PartA
• /
• v.9A no.2
• /
• pp.259-266
• /
• 2002

In this paper we implemented various image processing filtering using the format converter. This design method is based on realized the large processor-per-pixel array by integrated circuit technology. These two types of integrated structure are can be classify associative parallel processor and parallel process DRAM (or SRAM) cell. Layout pitch of one-bit-wide logic is Identical memory cell pitch to array high density PEs in integrate structure. This format converter design has control path implementation efficiently, and can be utilize the high technology without complicated controller hardware. Sequence of array instruction are generated by host computer before process start, and instructions are saved on unit controller. Host computer is executed the pixel-parallel operation starting at saved instructions after processing start. As a result, we obtained three result that 1) simple smoothing suppresses higher spatial frequencies, reducing noise but also blurring edges, 2) a smoothing and segmentation process reduces noise while preserving sharp edges, and 3) median filtering may be applied to reduce image noise. Median filtering eliminates spikes while maintaining sharp edges and preserving monotonic variations in pixel values.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.277-284
• /
• 2020

The remaining range between missile and target can be used to calculate the guidance command as well as to determine the explosion time of the warhead. Since the range, however, is not directly measured by on-board sensors of the missile, it is usually estimated by filter-based techniques using angle-only measurements. Conventional filter-based techniques are complex and require huge computation. In this paper, we propose a range estimation algorithm based on the geometrical triangulation principle for two points of missiles and a target. The proposed algorithm has a simple structure but the accuracy is largely dependent on the measurement errors. To improve the accuracy of estimation, Digital Fading Memory Filter (DFMF) is applied. The performance of the proposed algorithm is analyzed through numerical simulations.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.718-723
• /
• 2011

In this paper, we propose a visual multi-touch air input device using vision cameras. The implemented device provides a barehanded interface which copes with the multi-touch operation. The proposed device is easy to apply to the real-time systems because of its low computational load and is cheaper than the existing methods using glove data or 3-dimensional data because any additional equipment is not required. To do this, first, we propose an image processing algorithm based on the HSV color model and the labeling from obtained images. Also, to improve the accuracy of the recognition of hand gestures, we propose a motion recognition algorithm based on the geometric feature points, the skeleton model, and the Kalman filter. Finally, the experiments show that the proposed device is applicable to remote controllers for video games, smart TVs and any computer applications.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.231-243
• /
• 2009

Many DSP systems are streaming applications in which streams of data constantly flow through a set of filters. Dataflow programming paradigm is one of effective methods for representing these streaming applications. Dataflow programming model explicitly exposes parallelisms within an application, which helps compiling of the application onto a multicore platform. We propose SPEX(Signal Processing Extension), a language extension to a standard imperative language based on the parameterized dataflow model. Parameterized dataflow model is a kind of dataflow model that can express a modest fashion of dynamism contrary to the synchronous dataflow that can represent only static dataflow. SPEX facilitates characterizing an application written in conventional imperative languages such C/C++ as a streaming application. SPEX is comprised of a few keywords augmented to the conventional C++ syntax for representing dataflow paradigm. SPEX also restricts the syntax and semantics of C++ in order to fit the program within a certain streaming programming category. In this paper, we focus on the capability of SPEX in representing streaming computations within filters and streaming communications among filters.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.381-384
• /
• 1998

본 논문은 주행중인 자동차 환경에서 운전자의 안전성 및 편의성의 동시 확보를 위하여, 보조적인 스위치 조작없이 상시 음성의 입, 출력이 가능하도록 한다. 이때 잡음에 강인한 threshold 값을 구하기 위하여, 일정한 시간마다 기준 에너지와 영교차율(Zero Crossing Rate)을 변경하며, 밴드패스 필터(bandpass filter)를 이용하여 1차, 2차로 나누어 실시간 상태에서 자동으로, 정확하게 끝점검출(End Point Detection)을 처리한다. 기준패턴(reference pattern)은 DMS(Dynamic Multi-Section)을 사용하며, 화자의 변별력을 높이기 위하여 2개의 모델사용을 제안한다. 또한 주행중인 차량의 잡음환경에 강인하기 위하여 일반주행(80km/h 이내), 고속주행(80km/h 이상)등으로 나누며 차량의 가변잡음 크기에 따라 자동으로 선택하도록 한다. 음성의 특징 벡터와 인식 알고리즘은 PLP 13차와 One-Stage Dynamic Programming (OSDP)를 이용한다. 실험결과, 자주 사용되는 차량 편의장치 제어명령 33개에 대하여 중부, 영동 고속도로(시속 80Km/h 이상)에서 화자독립 89.75%, 화자종속 90.08%의 인식율을 구하였으며, 경부 고속도로에서는 화자독립 92.29%, 화자종속 92.42%의 인식율을 구하였다. 그리고 저속 주행중인 자동차 환경(80km/h 이내, 시멘트, 아스팔트 등의 서울시내 및 시외독립)에서는 화자독립 92.89%, 화자종속 94.44% 인식율을 구하였다.

• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.123-136
• /
• 2006

The prefetching technique is an effective way to reduce the latency caused memory access. However, excessively aggressive prefetch not only leads to cache pollution so as to cancel out the benefits of prefetch but also increase bus traffic leading to overall performance degradation. In this thesis, a prefetch filtering scheme is proposed which dynamically decides whether to commence prefetching by referring a filtering table to reduce the cache pollution due to unnecessary prefetches In this thesis, First, prefetch hashing table 1bitSC filtering scheme(PHT1bSC) has been shown to analyze the lock problem of the conventional scheme, this scheme such as conventional scheme used to be N:1 mapping, but it has the two state to 1bit value of each entries. A complete block address table filtering scheme(CBAT) has been introduced to be used as a reference for the comparative study. A prefetch block address lookup table scheme(PBALT) has been proposed as the main idea of this paper which exhibits the most exact filtering performance. This scheme has a length of the table the same as the PHT1bSC scheme, the contents of each entry have the fields the same as CBAT scheme recently, never referenced data block address has been 1:1 mapping a entry of the filter table. On commonly used prefetch schemes and general benchmarks and multimedia programs simulates change cache parameters. The PBALT scheme compared with no filtering has shown enhanced the greatest 22%, the cache miss ratio has been decreased by 7.9% by virtue of enhanced filtering accuracy compared with conventional PHT2bSC. The MADT of the proposed PBALT scheme has been decreased by 6.1% compared with conventional schemes to reduce the total execution time.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.41-47
• /
• 2007

The first geostationary satellite made by Korea, COMS, has the three different payload ; Meteorological sensor, Oceanographic sensor and Ka-band communication payload. There are Meteorological & Ocean Data Communication Subsystem(MODCS) and Telemetry, Command and Ranging Subsystem(TC&R) as other RF radiation sources. MODCS transmits and receives Meteo and Ocean measurement data from/to earth using L-band and TC&R using S-band. The Ka-band communication payload will provide high-speed multimedia services and communication services for natural disaster such as prediction, prevention, and recovery services in the government communications network.Ka-band beacon is for the earth antenna pointing and the experiment of rain fading. This paper gives the analysis results about the mutual radiation effect on Ka-band communication payload, Ka-band beacon, MODCS and TC&R. Up/Down link power and coupling factor including the geometrical position and distance of antenna, filter rejection and degradation factor due to the different polarization are considered. The results show MODCS and TC&R are compatible for Ka-band communication payload and Ka-band beacon does not interfere with MODCS and TC&R normal operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.225-236
• /
• 2017

In this paper, a simulation test bed is presented which operates to provide full-scale simulation of airborne multi-function phased array radars. This simulation test bed provides a capability to evaluate the target tracking performance. To realize aircraft operation scenario, we developed 6DOF aircraft dynamics model which can generate trajectories and attitude of an aircraft. This procedure includes steady state flight trim search, autopilot design, and aircraft guidance command design. Also, the radar-environment integrated simulator includes target detection/measurement model and tracking filter. Developed simulator is validated by creating an air-to-air scenario.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.708-717
• /
• 2017

Tracking of sound-location is widely used in various area such as intelligent CCTV, video conference and voice commander. In this paper we introduce the real-time sound-location tracking method for smart lecture system using TDoA(Time Difference of Arrival) with orthogonal microphone array on the ceiling. Through discussion on some models of TDoA detection, cross correlation method using linear microphone array is proposed. Orthogonal array with 5 microphone could detect omni direction of sound-location. For real-time detection we adopt the threshold of received energy for eliminating no-voice interval, signed cross correlation for reducing computational complexity. The detected azimuth angles are processed using median filter for lowering the angle deviation. The proposed system is implemented with high performance MCU of TMS320F379D and MEMs microphone module and shows the accuracy of 0.5 and 6.5 in degree for white noise and lectured voice, respectively.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.440-445
• /
• 2013

This paper proposes a local estimation system which combines Cell Divide Algorithm with low-cost GPS/INS fused by Extended Kalman Filter(EKF) for localization of Quad-rotor when it returns to the departure point. In the research, the low-cost GPS and INS are fused by EKF to reduce the local error of low-cost GPS and the accumulative error of INS due to continuous integration of sensor error values. When the Quad-rotor returns to the departure point in the fastest path, a moving path can be known because it moves straight, where Cell Divide Algorithm is used to divide moving route into the cells. Then it determines the closest position of data of GPS/INS system fused by EKF to obtain the improved local data. The proposed system was verified through comparing experimental localization results obtained by using GPS, GPS/INS and GPS/INS with Cell Divide Algorithm respectively.