• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.51-61
• /
• 2016

New building methods are needed to aid increased inner-city redevelopment and industrial construction. A particular area of improvement is the efficient use of cut slopes, with the minimization of associated problems. A retaining wall of precast panels can resist the horizontal earth pressure by increasing the shear strength of the ground and reinforcing it through contact with the panels. Precast panels allow quick construction and avoid the problem of concrete deterioration. Other problems to be solved include the digging of borrow pits, the disposal of material cut from the slope, and degradation of the landscape caused by the exposed concrete retaining wall.This study suggest the methods of improvement of an existing precast panel wall system by changing the appearance of the panels to that of natural rock and improving the process of adhering the panel to a vertical slope. The panels were tested in the laboratory and in the field. The laboratory test verified their specific strength and behavior, and the field test assessed the panels' ground adherence at a vertical cutting. Reinforcement of the cutting slope was also measured and compared with the results of 3D numerical analysis. The results of laboratory test, identified that the shear bar increase the punching resistance of panel. And as a results of test construction, identified the construct ability and field applicability of the panel wall system adhered to in-situ ground. In addition to that, extended measurement and numerical analysis, identified the long-term stability of panel wall system adhered to in-situ ground.

• Korean journal of food and cookery science
• /
• v.18 no.4
• /
• pp.413-425
• /
• 2002

Quality characteristics of white bread added with lotus root powder(3, 6%) were investigated. Moisture content of white bread added with lotus root powder were higher than control. As the amount of added lotus root powder increased, the lightness, redness and yellowness of bread crust as well as the volume of the bread decreased, but the redness and yellowness of the crumb increased slightly. The content of free amino acids increased by the addition of lotus root powder and the major ones were L-glutamic acid, L-alanine, L-valine and threonine. The major flavor components were 2-methyl butanal and 3-methyl butanal, which were formed by the amino-carbonyl reaction in baking bread at high temperature. Aldehyde flavor components such as 2-ethylfuran, 2-butanedione and 3-butanedione were formed by yeast fermentation. Ethyl acetate and vinyl acetate also influenced the flavor of the bread. The addition of lotus root powder increased the hardness and fracturability, and decreased the gumminess, chewiness and cohesivenes of the bread. Sensory evaluation of white bread indicated that the addition of 3%, 6% lotus root bread enhanced the grain formation, color, mouth feeling, appearance, hardness, moistness, flavor and overall acceptability. Overall, the addition of 6% lotus root powder showed the best performance in the nutritional and functional aspects of the bread.

• The KIPS Transactions:PartB
• /
• v.17B no.6
• /
• pp.421-428
• /
• 2010

It takes a long time for the users to view a whole image from the image server under the low-bandwidth internet environments or in case of a big sized image. In this case, as there needs a technique that preferentially transfers a part of image, JPEG2000 offers a ROI(Region-of-Interest) coding. In ROI coding, the users see the thumbnail of image from the server and specifies some regions that they want to see first. And then if an information about the regions are informed to the server, the server preferentially transfers the regions of the image. The existing methods requested a huge time to compute the mask information, but this thesis approximately computes the regions and reduces the creating time of the ROI masks. If each code block is a mixed block which ROI and background are mixed, the proper boundary points should be acquired. Searching the edges of the block, getting the two points on the edge, to get the boundary point inside the code block, the method searches a mid point between the two edge points. The proposed method doesn't have a big difference compared to the existing methods in quality, but the processing time is more speedy than the ones.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2015

There are many efforts to mechanize the process for underwater port construction due to the severe and adverse working environment. This paper presents an underwater construction robot to level rubbles on the seabed for port construction. The robot is composed of a blade and a multi-functional arm to flatten the rubble mound with respect to the reference level at uneven terrain and to dig and dump the rubbles. This research analyzes the kinematics of the blade and the multi-functional arm including track and swing motions with respect to a world coordinate assigned to a reference depth sensor. This analysis is conducted interfacing with the position and orientation sensors installed at the robot. A hydraulic control system is developed to control a track, a blade and a multi-functional arm for rubble leveling work. The experimental results of rubble leveling work conducted by the robot are presented in land and subsea. The working speed of the robot is eight times faster than that of a human diver, and the working quality is acceptable. The robot is expected to have much higher efficiency in deep water where a human diver is unable to work.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.648-655
• /
• 2020

The firing pin of modern automatic rifles detonates the primer of loaded ammunition via a hammer. During this process, the firing pin receives an impact load and repetitive force throughout the life of the rifle. An endurance test of a rifle showed that the firing pin breaks prematurely at 96.26% of life. Accordingly, a case study was conducted through cause analysis and a reconstruction test. Optical microscopy and scanning electron microscopy of the broken surface of the firing pin showed that a crack began in the circumferential direction of the surface, resulting in a fatigue crack to the core after repeated impact. Crack growth and fatigue destruction occurred at the end due to the repetitive impact and was estimated using a notch. For verification, a sample that produced a 0.03mm circumferential notch was broken at 64.25% of life in the reconstruction test. A test of breakage according to the notch types showed that a 0.3mm and a 0.5mm one-side notch were broken at 66.53% and 50.76%, respectively, and a 0.03mm six-point notch was broken at 85.65%. The endurance life of a sample firing pin with a rough surface and tool mark was examined, but an approximately 381 ㎛ internal crack formed. Through this study, failure for each notch type was considered. These results show that quality control of the notch and surface roughness is essential for ensuring the reliability of a component subjected to repeated impact.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.305-311
• /
• 2020

Rising sea levels along the coast from global warming causes the increase of wave energy along the coast. This rise in sea levels results in relatively deep water levels, which would incur the loss of sand that had not occurred in the past from erosion in coastal areas. Generally, it has been challenging to protect against coastal erosion, and the slope, cross-sectional shape, and materials are selected for the site conditions depending on the change in external forces. However, the application of counter measures based on insufficient understanding of the phenomenon is causing various damage, indicating the need for technological development and converging technologies to improve credibility. In this study, we developed eco-friendly permeable biopolymer concrete blocks to control the coastal erosion by using the Bio-Coast, an effective porous structure that mitigates the destructive erosion caused by the rising sea levels. The hexagonal design of Bio-Coast was derived from the honeycomb, columnar joints, and clover, which are durable and stable structures in nature, and the design was changed to apply bumps on the Bio-Coast filling in the form of a clover to reduce wave overtopping and run-up. Applying the field condition of beaches on the east coast of Korea, the block weight and size were decided and the prototype blocks were manufactured and are ready for field placement. In particular, it is intended to protect coastal areas from destructive erosion by natural and artificial external forces, and to extend the design to river,s lakes, and natural walking trails, to improve the efficiency of quality control and process control through the use of blocks.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.99-106
• /
• 1998

In order to investigate the impact properties of structural materials for LNG tank, instrumented Charpy impact tests were carried out at cryogenic temperatures. $9\%$ Ni steel showed a superior fracture resistance because of less degradation in toughness until 77 K. From the load-deflection curve obtained by an instrumented methods it was found that with the decrease of temperature from 173 K to 77 K, the peak load in the curve increased, but the total absorbed energy decreased. In addition, the energy absorbed during the crack growth was larger than one absorbed in the process of crack initiation. In SUS304L material, the energy absorbed in the process of the crack initiation was relatively large, but the energy absorbed in the process of crack growth was small, the behavior of absorbed energy was well agreed with the observations of the fracture surface which showed a relatively smooth fracture surface. The absorbed Charpy impact energy in the case of A5083 alloy was lower as compared with other steels, and some cracks were observed along the crack propagation direction at the fracture surface of 77 K.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2002.11b
• /
• pp.76-76
• /
• 2002

무주나무(Lasianthus japonicus Miquel)는 일본, 대만, 중국 등에 분포하고 열대 및 아열대의 상록활엽수림에서만 자라는 것으로 알려져 있으며, 우리나라에는 제주도 남쪽계곡에만 분포하는 희귀식물이다. 무주나무는 현재 환경부 지정 보호야생식물로 보호되고 있으나 개체특성 및 자생지에 대한 정확한 조사가 이루어진 바 없다. 본 연구는 무주나무의 자생지 현황과 생육특성을 파악하고자 실시하였다. 무주나무의 자생지는 제주도 남제주군 남원읍 하례리 해발 250m의 계곡 동사면과 서귀포시 돈네코 계곡의 해발 350 m 계곡의 서사면 등 2개소로 확인되었다. 자생지별 개체수는 남원읍 하례리 4개체, 서귀포시 돈네코계곡 5개체 등 총 9개체에 불과하였다. 자생지는 계곡의 상록수림 하부에 바위 위 부엽토나, 습한 계곡 사면이었으며, 교목층에는 구실잣밤나무, 비쭈기나무, 황칠나무, 동백나무 등이 우점하고, 관목층에는 사스레피나무, 백량금, 산호수 등이 우점하는 상록활엽수림이었다. 분포 개체의 수고는 최소 0.4 m, 최대 1.55 m로 평균 1.5 m 였다. 생장특성을 조사한 결과 줄기는 어릴 때는 사각형이지만 점차 원형으로 되며, 일정한 마디가 있고 털이 없으며, 잎은 대생하고, 혁질이며, 중륵과 측맥이 뚜렷한 특성을 갖고 있었다. 열매는 장과형으로 성숙 시에는 남색이며 털이 없으며, 직경 약 6-7 mm, 4-5개의 종자가 들어 있었다. 종자는 반달형이며, 3개의 홈이 지는 특성을 갖고 있었다. 현재의 자생지는 자연적인 요인으로서 토양유실이 심하게 일어나고 있는 지역이었으며, 교목 또는 다른 관목에 의한 피압으로 무주나무의 생장에 부적절한 환경으로 판단되었다. 따라서 자생지의 적절한 식생관리와 지속적인 자생지 조사 및 자생지외 보존에 관한 연구가 이루어져야할 것으로 생각된다.$I_{NO}$ 가 죽절초를 제외한 3종에서 여름철 낮시간에 증가하였다. 겨울철의 O-J-I-P곡선은 모든 종에서 낮시간에 다소 낮아지지만 큰 변화는 없었다. 그리고, 문주란, 박달목서, 파초일엽에서 $\psi$o/(1-$\psi$o)가 낮시간에 다소 증가하였다. 이로부터 P $I_{NO}$ , SF $I_{NO}$ , $\psi$o/(1-$\psi$o)등의 변수는 식물의 활력도를 검정하는 지표로 활용될 가능성이 높다고 할 수 있다.irc}C$) 까지 동시에 냉각된 사실을 지시한다. 각섬석 편암내의 각섬석들은 복잡한 40Ar/39Ar 연대를 보여주며 일부가 평형연대를 보여주지만 특별한 의미 부여가 힘들다.해예방행동을 촉구하는 등의 효과도 높은 것으로 예방의학적인 유용성이 크다고 볼 수 있다. 미침을 알 수 있었다. 대두 단백질로 코팅된 golden delicious는 상온에서60일 동안 보관하였을 경우, 사과표피의 색도 변화를 현저히 지연시킴을 확인하였다. 또한 control과 비교하여 성공적으로 사과에 코팅하였으며, 상온에서 보관하여을 때 사과의 품질을 30일 이상 연장하는 효과를 관찰하였다. 이들 결과로부터 대두단백질 필름이 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.3
• /
• pp.67-71
• /
• 2014

An attempt to grow high quality GaN on silicon substrate using metal organic chemical vapor deposition (MOCVD), herein GaN epitaxial layers were grown on various Si(111) substrates. Thin Platinum layer was deposited on Si(111) substrate using sputtering, followed by thermal annealing to form Pt nano-clusters which act as masking layer during dry-etched with inductively coupled plasma-reactive ion etching to generate nano-patterned Si(111) substrate. In addition, micro-patterned Si(111) substrate with circle shape was also fabricated by using conventional photo-lithography technique. GaN epitaxial layers were subsequently grown on micro-, nano-patterned and conventional Si (111) substrate under identical growth conditions for comparison. The GaN layer grown on nano-patterned Si (111) substrate shows the lowest crack density with mirror-like surface morphology. The FWHM values of XRD rocking curve measured from symmetry (002) and asymmetry (102) planes are 576 arcsec and 828 arcsec, respectively. To corroborate an enhancement of the growth quality, the FWHM value achieved from the photoluminescence spectra also shows the lowest value (46.5 meV) as compare to other grown samples.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1236-1241
• /
• 2013

This study was conduct in order to provide information on formula optimization, salinity, and water content for commercialization of traditional buckwheat Soksungjang. To do this, we determined quality characteristics such as total microbial flora counts, amino-type nitrogen content, total polyphenol content, antioxidant activity, and performed a sensory evaluation. The moisture contents showed a gradual decrease during the fermentation period. There was no significant difference in all samples. During 70 days of fermentation, the pH showed a similar trend starting at a pH of 6, and dropping sharply to 5.5, except Experiment C (15% buckwheat powder in the meju, 10% NaCl, and 130% water in the total Soksungjang). On the other hand, total acidity increased regularly, however, its ranges were various points in all samples. The microbial population was reduced by 1~3 log cycle in all samples during the fermentation period. The content of amino-type nitrogen showed a gradual increase during fermentation, ranging from 160 to 213 mg% after 70 days. No remarkable difference in total polyphenol content and antioxidant activity was observed in all samples. In sensory evaluation, Soksungjang with 30% (control) and 15% (Experiment C) buckwheat showed a significantly higher overall score.