• Analytical Science and Technology
• /
• v.36 no.6
• /
• pp.300-314
• /
• 2023

The quality of the products was investigated by analyzing fluorine content, pH, preservatives and tar colors in 31 dentifrice products (6 items for children) and 15 mouthwash products (2 items for children) marketed. It was intended to provide correct information to consumers by checking whether the standards and product indications match. As a result of measuring the fluoride concentration, 26 dentifrice and 15 mouthwash products contained from 48 to 1,472 ppm and from 85 to 225 ppm, respectively. Fluorine detection rates of dentifrice and mouthwash products were 83.9 and 83.3 %, respectively showing similar levels. Of the 41 fluoride-detected dentifrice and mouthwash products, 40 were 90.7~109.8 % of the displayed amount and suitable for the fluorine content standard of 90.0 to 110.0 %, but one dentifrice was found to be inappropriate at 36.3 % of the content indicated on the product. The pH of the dentifrice was 5.1~9.4, and the mouthwash was 4.2~6.2, which met all standards. As a result of simultaneous analysis of the concentration of six preservatives, benzoic acid was detected the most in 15 cases with a 30.6 % detection rate, sorbic acid was detected in 9 cases (detection rate of 18.4 %), and all four types of methyl p-hydroxybenzoate, ethyl p-hydroxybenzoate, propyl p-hydroxybenzoate, butyl p-hydroxybenzoate were not detected. As a result of analyzing the concentration of 10 types of tar colors, six types including red40, yellow4, yellow5, yellow203, green3, and blue1 were detected in a total of 9 cases (2 dentifrices and 7 mouthwashes) with blue1 being the most frequently detected. Detected fluorine concentration, added preservatives and tar colors were consistent with the product markings and it was well written on product packaging. The detected preservatives and tar colors were at a safe level due to low risk compared to Acceptable Daily Intake.

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.78-87
• /
• 2023

This study was conducted to evaluate the effect of different 1-methylcyclopropene (1-MCP) concentrations on fruit quality of small-sized RubyS apples during cold storage. After harvesting, the fruits were treated with 1-MCP at 0.5 or 1 µL/L concentrations and, subsequently, stored at 0℃ for 6 months. After 6 months, the flesh firmness of untreated fruits, which was 85.4 N at harvest, had gradually decreased to 46.5 N; however, that of 1-MCP-treated fruits was maintained at 59.1 and 59.5 N. Titratable acidity (TA) of untreated fruits had also decreased from 0.42 to 0.24%, whereas that of 1-MCP-treated fruits was maintained at 0.26 and 0.27%. Soluble solids content (SSC) did not differ in all fruits. However, the 1-MCP-treated fruits had lower levels of SSC/TA ratio than untreated fruits. Moreover, after 6 months, the ethylene production had increased to 47.0 µL/kg/h in the untreated fruits, whereas 1-MCP blocked the ethylene production at 1.4 and 1.7 µL/kg/h. The weight loss and peel color variables remained unaffected by 1-MCP treatments. Thus, these results indicated that, for RubyS apples, the storability was only 2 months at 0℃ without treatment, which can be extended to 6 months with 1-MCP treatments. The application of 1-MCP at 0.5 µL/L concentration is effectively and economically sufficient to maintain the quality of RubyS apples.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2003

Research was Initiated to investigate germination characteristics of cool-season grasses (CSG). Several turfgrasses were tested in different experiments. Experiments I and III were conducted under a room temperature condition of 16$^{\circ}C$ to 23 $^{\circ}C$ and under a constant light condition at 25 $^{\circ}C$, respectively. An alternative environment condition that is a requirement for a CSG germination test by International Seed Testing Association (ISTA) was applied in the Experiment II, consisting of 8-hr light at 25 $^{\circ}C$ and 16-hr dark at 15 $^{\circ}C$. In each experiment, data such as early germinating vigor, germination speed and germination rate were evaluated. Six turfgrass entries were comprised of two varieties each from Kentucky bluegrass (KB, Poa pratensis L.), perennial ryegrass (PR, Lolium perenne L.), and tall fescue (TF, Festuca arundinacea Schreb.), respectively. Significant differences were observed in early germinating vigor, germination speed and germination rate. Early germinating vigor as measured by days to 70% seed germination was variable according to environment conditions, turfgrasses and varieties. It was less than 6 days in PR and 6 to 9 days in TF. However, KB resulted in 11 to 13 days under an alternative condition and 11 to 28 days under a room temperature condition. The germination speed was fastest in PR of 7 to 10 days and slowest in KB of 14 to 21 days. However, intermediate speed of 10 to 14 days was associated with TF. There were considerable variations in germination rate among turfgrasses according to different conditions. Generally, PR and TF germinated well, regardless of environment conditions. However, a great difference was observed among KB varieties, when compared with others. Under a room temperature condition, total germination rate was 71.0% in Midnight and 77.7% in Award. And it increased under an alternative condition, which was 81.7% and 91.7% in Award and Midnight, respectively. However, the poorest rate was found under a constant temperature condition, resulting in 18.0% in Award and 15.3% in Midnight. These results suggest that an intensive germination test required by ISTA be needed prior to the decision of seeding rate, including early germinating vigor and germination speed as well as total germination rate. KB is very sensitive to environment conditions and thus its variety selection should be based on a careful expertise.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.101-108
• /
• 2012

This study was conducted to confirm the mass production of male pupae and sex-limited larval marking variety as a host for synnemata production of Isaria tenupes in RDA(Rural Development Administration). Silkworm pupation, infection rate and synnemate formation of I.tenuipes were examined. Among the silkworm varieties tested, male Hansaengjam showed the highest pupation rate at 98.7%. I. tenuipes infection rate of larvae of newly-exuviated 5th instar silkworm was 83.7 ~ 90.4% in the spring rearing season and 91.7 ~ 96.6% in the autumn rearing season. Synnemata production of I. tenuipes was execellent in female Yangwonjam with an incidence rate of 99.5% followed by male Yangwonjam(99.5%) and Baegokjam(99.4%) in the spring and autumn rearing season. Synnemata living weight ranged from 0.93 ~ 1.25 g in the spring rearing season. The female Hansaengjam had the heaviest synnemata weight(1.25 g). Synnemata dry weight ranged from 0.27 ~ 0.35 g in the spring rearing season. The female Yangwonjam had the heaviest synnemata weight(0.35 g).

• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.105-127
• /
• 1989

Although poultry industry in Japan has been much developed in recent years, it still needs to be developed , compared with developed countries. Since the poultry market in Korea is expected to be opened in the near future it is necessary to maximize the Productivity to reduce the production costs and to develop the scientific, technologies and management organization systems for the improvement of the quality in poultry production. Followings ale the summary of poultry industry in Japan. 1. Poultry industry in Japan is almost specized and commercialized and its management system is ： integrated, cooperative and developed to industrialized intensive style. Therefore, they have competitive power in the international poultry markets. 2. Average egg weight is 48-50g per day (Max. 54g) and feed requirement is 2. 1-2. 3. 3. The management organization system is specialized and farmers in small scale form complex and farmers in large scale are integrated.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1059-1066
• /
• 2005

The objective of this study was to investigate the physico-chemical characteristics of chicken breast surimi processed by four times washing (C) and adjustment to pH 3.0 (T1) and pH 11.0 (T2). Water, crude protein, myofibrillar protein and yield of the treatment C were lower compared to other two treatments. Crude fat of T2 was higher than other two treatments. pH, WHC, breaking force and deformation were not different among the treatments. Shear force of T2 was the highest, followed by T1 and C. L* of T2 and a* of T1 were lower than other two treatments. b* of C was the highest, while T2 was the lowest. Brittleness and hardness in textural properties were not different among the treatments. Cohesiveness of T1 was the lowest among three treatments. Springiness and chewiness of T1 and T2 were higher than those of treatment C, respectively. Gumminess of T2 were higher compared to C and T1. Appearance and flavor in sensory evaluation were the highest in T1 and the lowest in C among three treatments. Color, aroma, juiciness, tenderness and overall acceptability were not different among the treatments. In conclusion, physico-chemical quality of chicken breast surimi was the highest in T2 among three treatments.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.63-68
• /
• 2013

Ethyl carbamate (EC) is a contaminant generated in the fermentation processes of various fermented foods. In this study, residue levels of EC in 95 alcoholic beverage samples were determined by using Gas Chromatography/Tandem Mass Spectrometry (GC/MS/MS). All the samples were purified by a liquid-liquid extraction (LLE) method using dichloromethane. The LLE method enables an improvement in time and cost to detection and specificity over the conventional extraction methods. The limits of detection and quantification (LOD and LOQ) to analyze EC were 1.3 and 4.0 ng/mL, respectively. The recovery rates of EC were ranged from 90.0 to 97.5% at the levels of 50, 100, and 500 ug/L. Among traditional grain-based alcoholic beverage samples (n = 34), the average residue levels of EC in takju, yakju, and cheongju were 0.63, 7.01, and 14.11 ug/L, respectively. Among fruit-based alcoholic beverage samples (n = 48), those of EC in japanese apricot spirits, bokbunjaju, grape wines, and other fruit wines were 79.18, 1.66, 2.64, and 2.39 ug/L, respectively. Among distilled or diluted alcoholic beverage samples (n = 13), those of EC in soju (distilled or diluted), general distillates, liquors, and brandies were 0, 3.30, 8.20, and 8.52 ug/L, respectively. Therefore, this study reports that the residue levels of EC in the alcoholic beverages, distributed in the current domestic markets, did not reach its maximum allowed levels of 30 and 400 ug/L established for grape and fruit wines in Canada, respectively.

• Radiation Oncology Journal
• /
• v.21 no.3
• /
• pp.238-244
• /
• 2003

Purpose: The Planning of High-Dose-Rate (HDR) brachytherapy treatments are becoming individualized and more dependent on the treatment planning system. Therefore, computer software has been developed to perform independent point dose calculations with the integration of an isodose distribution curve display into the patient anatomy images. Meterials and Methods: As primary input data, the program takes patients'planning data including the source dwell positions, dwell times and the doses at reference points, computed by an HDR treatment planning system (TPS). Dosimetric calculations were peformed in a $10\times12\times10\;Cm^3$ grid space using the Interstitial Collaborative Working Group (ICWG) formalism and an anisotropy table for the HDR Iridium-192 source. The computed doses at the reference points were automatically compared with the relevant results of the TPS. The MR and simulation film images were then imported and the isodose distributions on the axial, sagittal and coronal planes intersecting the point selected by a user were superimposed on the imported images and then displayed. The accuracy of the software was tested in three benchmark plans peformed by Gamma-Med 12i TPS (MDS Nordion, Germany). Nine patients'plans generated by Plato (Nucletron Corporation, The Netherlands) were verified by the developed software. Results: The absolute doses computed by the developed software agreed with the commercial TPS results within an accuracy of $2.8\%$ in the benchmark plans. The isodose distribution plots showed excellent agreements with the exception of the tip legion of the source's longitudinal axis where a slight deviation was observed. In clinical plans, the secondary dose calculations had, on average, about a $3.4\%$ deviation from the TPS plans. Conclusion: The accurate validation of complicate treatment plans is possible with the developed software and the qualify of the HDR treatment plan can be improved with the isodose display integrated into the patient anatomy information.

• Korean Journal of Organic Agriculture
• /
• v.16 no.2
• /
• pp.219-230
• /
• 2008

This trial was conducted to assess effects of cattle slurry application on productivity and feed values of barley and hairy vetch when they were influenced by single or mixed-sowed cultivation in paddy fields, and to obtain good quality of organic forage resources. The results summarized are as follows. For barley and hairy vetch, single-sowed cultivation was lower in annual dry matter (DM) and total digestible nutrients (TDN) yields than mixed-sowed (P<0.05). Although crude protein (CP) contents for the barley within single-sowed treatments were lowest as 6.5%, those of hairy vetch within the same sowed method were highest as 16.7%. However, mixed-sowed cultivation with barley and hairy vetch, showing 13.8% CP content, was significantly (P<0.05) higher than CP and relative feed value (RFV) of barley alone treatment. For barley alone treatment, cattle slurry application significantly increased annual DM and TDN yields in comparison with treatments of P+K fertilization as chemical fertilizers and no fertilizer as controls. Results from cattle slurry application showed 84% and 82% in contrast with chemical fertilizer for annual DM and TDN yields, respectively. For mixed-sowed cultivation with barley and hairy vetch, cattle slurry application showed 90% and 94% annual DM and TDN yields, respectively as compared with N+P+K fertilization as chemical fertilizers. Crude protein contents ($14.2{\sim}15.9%$) for cattle slurry application treatments were significantly (P<0.05) higher than those of other treatments. Moreover, cattle slurry application treatment had the highest TDN and RFV among treatments, showing $60.7{\sim}61.8%$ and $112.2{\sim}118.1$, respectively. For hairy vetch alone treatments, annual DM and TDN yields of cattle slurry alone application treatment were highest among fertilization treatments. Furthermore, CP, TDN and RFV of cattle slurry alone application treatments were significantly (P<0.05) higher than those of other treatments. The results showed that mixed-sowed cultivation rather than single-sowed for barley or hairy vetch improved their nutritive value and quality, and also within mixed-sowed cultivation, cattle slurry application increased production yield per ha and CP contents. In the application of above system to organic livestock farming, it would be expected that forages produced by cattle slurry application under mixed-sowed method might become a substitute for foreign organic grain as protein sources.

• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.131-135
• /
• 2006

A commercial ion chamber matrix was examined the characteristics and its performance for radiotherapy qualify assurance. The device was the I'mRT 2D-MatriXX (Scanditronix-Wellhofer, Schwarzenbruck, Germany). The 2D-MatriXX device consists of a 1020 vented ion chamber array, arranged in $24{\times}24cm^2$ matrix. Each ion chamber has a volume of $0.08cm^3$, spacing of 0.762 cm and minimum sampling time of 20 ms. For the investigation of the characteristics, dose linearity, output factor, short-term reproducibility and dose rate dependency were tested. In the testing of dose linearity. It has shown a good signal linearity within 1% in the range of $1{\sim}800$cGy. Dose rate dependency was found to be lower than 0.4% (Range: 100-600 Mu/min) relative to a dose rate of 300 Mu/min as a reference. Output factors matched very well within 0.5% compared with commissioned beam data using a ionization chamber (CC01, Scanditronix-Wellhofer, Schwarzenbruck, Germany) in the range of field sizes $3{\times}3{\sim}24{\times}24cm^2$. Short-term reproducibility (6 times with a interval of 15 minute) was also shown a good agreement within 0.5%, when the temperature and the pressure were corrected by each time of measurement. in addition, we compared enhanced dynamic wedge (EDW, Varian, Palo Alto, USA) profiles from calculated values in the radiation planning system with those from measurements of the MatriXX. Furthermore, anon-uniform IMRT dose fluence was tested. All the comparison studies have shown good agreements. In this study, the MatriXX was evaluated as a reliable dosimeter, and it could be used as a simplistic and convenient tool for radiotherapy qualify assurance.