• 제목/요약/키워드: 면품질

Search Result 1,186, Processing Time 0.027 seconds

Evaluation of Environmental Stability and Durability of Cementitious Mixed Soil (시멘트계 혼합토의 환경안정성 및 내구성 평가)

  • Oh, Sewook;Bae, Wooseok;Kim, Hongseok
    • Journal of the Korean GEO-environmental Society
    • /
    • v.23 no.9
    • /
    • pp.17-23
    • /
    • 2022
  • Using cement as a road subbase is economical, easily modified and supplemented and has excellent road pavement quality control. In addition, cement adheres well to sandy soils without adhesion, and it plays a role of permanently preserving adhesion in viscous soils with adhesion, so it can be widely applied as stable treatment with the advantages of increased strength, reduced compressibility. and improved durability. However, while cement is excellent in terms of strength for a road subbase, the material properties mean that it is difficult to maintain and reinforce when cracks or fractures occur due to dry shrinkage, and the pH increases in the ground due to hexavalent chromium eluting from cement. which can cause environmental problems such as groundwater contamination. Therefore, this study evaluates the usability of alternatives in the road base layer such as environmentally cementitious stabilizer and on-site soil generated from the site. We intend to reduce the environmental damage and evaluate the durability. To evaluate the applicability of the site, Environmental stability test and freeze-thaw test and wetting-drying test was conducted to evaluate the strength characteristics of alternative materials on the road through the limited performance evaluation of environmentally cementitious stabilizer. The test ranges were set at mixing ratios of 10%, 20%, and 30% and ages of three days, and 28 days old to evaluate the early strength and reference strength according to the mixing ratio of the environmentally cementitious stabilizer.

Rice Cultivar Breeding for Rice Flour with Low Amylose by Tissue Culture (저아밀로스 특성 및 쌀가루 적합 벼 품종 육성)

  • Park, Jae-Ryoung;Kim, Eun-Gyeong;Jang, Yoon-Hee;Kim, Kyung-Min
    • Journal of Life Science
    • /
    • v.32 no.9
    • /
    • pp.698-705
    • /
    • 2022
  • Rice consumption in Korea is continuously decreasing; therefore, methods for reducing rice stocks are now being proposed. Increasing the consumption of rice and reduce these stocks will require that the rice processing industry be developed beyond simply using cooked rice as food. The Korean people's eating habits have also diversified recently, and the consumption of bread is increasing. Therefore, breeding a cultivar for rice flour is now necessary. Here, a line suitable for processing into rice flour was cultivated by deriving a mutant line by tissue culture of Ilpum. Mutant populations were investigated for major agricultural traits in the field, and grain characteristics and endosperm characteristics were investigated after harvest. Among the lines, line 29111 had similar agricultural characteristics to the background Ilpum, and excellent grain quality, and was selected for further analysis. The physicochemical properties that determine taste were similar or improved. However, unlike Ilpum, 29111 had a non-uniform starch structure and a characteristic powdery endosperm because large and male starch grains are evenly distributed. Therefore, 29111 was viewed as a breeding line suitable for processing and for excellent agricultural characteristics and taste. The added value can be increased by diversifying the uses of rice. The taste was improved and a method for breeding cultivars with grain characteristics for glutinous rice that would satisfy both producers and consumers was presented.

Analysis of the Hydrological Components of the Seolmacheon Catchment 2019 Year (2019년 설마천 유역의 수문성분 분석)

  • Kim, Dong Phil
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.274-274
    • /
    • 2020
  • 환경부 홍수통제소의 경우는 전국단위의 강수량(지상, 레이더), 하천수위, 유사량 관측과 국부적으로 증발산량과 토양수분 관측이 이루어지고 있는 상황이며, 기상청 및 다른 공공기관도 각 목적에 맞게 수문기상관측이 이루어지나 유역(또는 지역) 단위의 물순환 과정(강우량, 유출량, 증발산량, 지하수함양량, 토양수분량 등 포함)을 규명하는 조사·연구는 매우 미비한 실정이다. 개별적인 물순환 성분별 수문조사에서 벗어난 전체적인 관점을 고려한 유역단위의 물순환 과정을 규명하는 것은 매우 중요하다. 즉 물순환 성분별 명확한 수문량 산정 결과는 수자원 개발과 물환경 보전에 중요한 정보를 제공할 수 있다. 따라서 물순환 성분별 명확한 분석을 위해서는 중·소규모 유역 단위를 대상으로 지속적이고 신뢰성 있는 자료의 획득과 축적이 중요하므로 중·소규모 유역 단위의 대표성 있는 시험유역의 운영은 매우 의미가 있다고 볼 수 있다. 본 논문에서는 한국건설기술연구원에서 운영하는 설마천 유역(유역면적 8.48㎢, 유로경사 2.15%, 경기도 파주시 적성면 소재)의 신뢰성 높은 2019년 관측자료를 이용하여 물순환 성분인 강우량, 하천유출량, 증발산량과 지하수 함양량의 자료를 산정하였으며, 물순환 성분별 균형을 이루는 자료를 생성하였다. 기본 관측자료인 강우량은 각 지점강우량의 관측자료의 비교·검토 등 품질관리를 통해 자료를 확정하고 유역평균강우량을 산정하였다. 하천수위는 기준수위표와의 검토를 통해 자료를 확정하였으며, 하천유출량은 유량측정성과와 단면검토를 통해 수위-유량관계곡선식을 개발하고, 확정된 수위자료를 적용하여 산정하였다. 그리고 증발산량은 유역내의 기상관측자료를 활용하여 잠재증발산량을 산정하였으며, 지하수함양량은 유역내에 관측된 지하수위자료를 이용하여 지하수 함양량을 산정하였다. 각 물순환 성분별로 산정된 자료는 과거년 자료와 비교·평가를 통해 균형성을 판단하였다. 각 성분별 최대치와 최소범위, 평균값을 고려하고, 강우일수, 강우의 강우강도와 지속기간, 기상자료(기온, 일조시간, 습도, 풍속 등)를 충분히 고려하였다. 각 물순환 성분별로 생성된 2019년의 설마천 유역의 총강우량은 1,024.1mm이며, 하천유출량은 608.6mm(총강우량 대비 59.4%), 실제증발산량은 385.1mm(37.6%), 지하수함양량은 30.4mm(3.0%)이다. 여기서, 실제증발산량과 지하수 함양량은 1개 지점에서 산정값이나, 물순환의 폐합 조건을 고려하여 산정된 결과이다. 향후 유역 전체를 대표하는 기법의 개발은 필요한 실정이다. 이와 같이 산정된 물순환 성분별 자료는 유역의 물순환 과정 규명을 위한 기초자료로 매우 유용하게 활용될 수 있으며, 유역 물관리를 위한 의사결정 과정에 중요한 역할을 할 수 있을 것으로 기대된다.

  • PDF

The Status of Maize Production and Distribution in Cambodia (캄보디아 옥수수 생산 및 유통현황 연구)

  • Lee, Kyu-Seong;Park, Ji-Won;Kim, Eun-Ji;Son, Beom-Young;Kim, Wook-Han
    • Journal of the Korean Society of International Agriculture
    • /
    • v.23 no.5
    • /
    • pp.513-519
    • /
    • 2011
  • In recent, the cultivation of maize in the world is being increased as a feed for the animal due to the increase of the large amount of meat consumption. However, reduction of supply for the feeding maize by the natural disaster such as drought, flooding, and demanding materials for bioenergy are attributed to increase the cereal price of the world that caused for the fluctuation of prices. The research has been done to provide useful information to the Korean agricultural investor regarding the current status of maize production and distribution in Cambodia. The maize cultivation of Cambodia in 2009 presented as a second major crop at the area of 6.8% in the total crop production area, and it continuously increased maize production yearly basis for the internal uses as well as for the exportation. The total amount of production showed by amount of 0.92 million tons due to the increased production of unit area. The yield production of unit area in current shows about 4 tones per hectare. About 90% of total production produced during August to September at wet season, and area of Batambang province produced about 70% of the total production. The production of feeding maize cultivated about 70% of the total cultivation area, and the exportation have done around 60% and remains were consumed as a domestic uses. The prospects of maize production in Cambodia will be increased due to the acceleration of livestock industry as 8.7% of annual growth rate.

Correlation Analysis of Cutter Acting Force and Temperature During the Linear Cutting Test Accompanied by Infrared Thermography (선형절삭시험과 적외선 열화상 측정을 통한 픽커터 작용력과 발생 온도의 상관관계 분석)

  • Soo-Ho Chang;Tae-Ho Kang;Chulho Lee;Hoyoung Jeong;Soon-Wook Choi
    • Tunnel and Underground Space
    • /
    • v.33 no.6
    • /
    • pp.519-533
    • /
    • 2023
  • In this study, the linear cutting tests of pick cutters were carried out on a granitic rock with the average compressive strength over 100 MPa. From the tests, the correlation between the cutter acting force and the temperature measured by infrared thermal imaging camera during rock cutting was analyzed. In every experimental condition, the maximum temperature was measured at the rock surface where the chipping occurred, and the temperature generated in the rock was closely correlated with the cutter acting force. On the other hand, the temperature of a pick cutter increased up to only 36℃ above the ambient temperature, and the correlation with the cutter force was not obvious. This can be attributed to the short cutting distance under laboratory conditions and the high thermal conductivity of the tungsten carbide inserts. However, the relatively high temperature of the tungsten carbide inserts was found to be maintained. Therefore, it is recommended that a reinforcement between the insert and the head of a pick cutter or the quality improvement of silvering brazing in the production of a cutter is necessary to maintain the high cutting performance of a pick cutter.

Analyzing Leakage Defect Types in Educational Facilities and Deriving Key Management Strategies Using the FTA Method (FTA기법을 이용한 교육시설 누수 하자 유형 분석 및 주요 원인 관리방안 )

  • Jung, Daegyo;Park, Hyunjung;Lee, Dongyeop;Kim, Daeyoung
    • Korean Journal of Construction Engineering and Management
    • /
    • v.25 no.1
    • /
    • pp.42-49
    • /
    • 2024
  • In recent years, the construction industry has diligently focused on improving the quality and safety of buildings through smart technologies. However, there is a growing trend of leakage defects, especially in educational facilities, due to aging. The objective of this study is to analyze the causes of these defects in educational environments using the Fault Tree Analysis (FTA) technique and propose preventive measures based on the findings. The FTA technique is explained through a review of domestic literature, and data from the Educational Support Center from 2019 to 2021 are examined to identify major defects. The construction of the Fault Tree (FT) for leakage defects resulted in the identification of 12 basic events. Subsequently, a comprehensive understanding of the causes of leakage is achieved through FTA analysis, leading to the identification of the primary causes of defects. Leakage defects accounted for 46.8% of all reported issues in educational facilities, with roof (ceiling) leaks being the most common problem. FTA analysis revealed that poor substrate treatment was the main cause of roof (ceiling) leaks, which could be attributed to cracks in the waterproof layer, joint cracks, and microvoids in the waterproof layer. The primary achievement of this research is to provide essential data for preventing leakage defects in educational facilities and developing preventive measures through the FTA technique. These results are expected to significantly enhance the management of educational facilities and the prevention of leakage issues.

Creating and Utilization of Virtual Human via Facial Capturing based on Photogrammetry (포토그래메트리 기반 페이셜 캡처를 통한 버추얼 휴먼 제작 및 활용)

  • Ji Yun;Haitao Jiang;Zhou Jiani;Sunghoon Cho;Tae Soo Yun
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.25 no.2
    • /
    • pp.113-118
    • /
    • 2024
  • Recently, advancements in artificial intelligence and computer graphics technology have led to the emergence of various virtual humans across multiple media such as movies, advertisements, broadcasts, games, and social networking services (SNS). In particular, in the advertising marketing sector centered around virtual influencers, virtual humans have already proven to be an important promotional tool for businesses in terms of time and cost efficiency. In Korea, the virtual influencer market is in its nascent stage, and both large corporations and startups are preparing to launch new services related to virtual influencers without clear boundaries. However, due to the lack of public disclosure of the development process, they face the situation of having to incur significant expenses. To address these requirements and challenges faced by businesses, this paper implements a photogrammetry-based facial capture system for creating realistic virtual humans and explores the use of these models and their application cases. The paper also examines an optimal workflow in terms of cost and quality through MetaHuman modeling based on Unreal Engine, which simplifies the complex CG work steps from facial capture to the actual animation process. Additionally, the paper introduces cases where virtual humans have been utilized in SNS marketing, such as on Instagram, and demonstrates the performance of the proposed workflow by comparing it with traditional CG work through an Unreal Engine-based workflow.

Studies on the Roadside Revegetation and Landscape Reconstruction Measures (도로녹화(道路綠化) 및 도로조경기술개발(道路造景技術開発)에 관(関)한 연구(硏究))

  • Woo, Bo Myeong;Son, Doo Sik
    • Journal of Korean Society of Forest Science
    • /
    • v.48 no.1
    • /
    • pp.1-24
    • /
    • 1980
  • One of the most important basic problems for developing the new techniques in the field of road landscape planting practices in Korea, is to clarify, analyse, and evaluate the existing technical level through actual field survey on the various kinds of planting techniques. This study is, therefore, aimed at the good grasp of detail essences of the existing level of road landscape planting techniques through field investigations of the executed sites. In this study, emphasized efforts are made to the detail analysis and systematic rearrangements of such main subjects as; 1) principles and functions of the road landscape planting techniques; 2) essential elements in planning of it; 3) advanced practices in execution of planting of it; 4) and improved methods in maintenance of plants and lands as an entire system of road landscape planting techniques. The road landscape planting techniques could be explained as the planting and landscaping practices to improve the road function through introduction of plants (green-environment) on and around the roads. The importances of these techniques have been recognized by the landscape architects and road engineers, and they also emphasize not on]y the establishment of road landscape features but also conservation of human's life environment by planting of suitable trees, shrubs, and other vegetations around the roads. It is essentially required to improve the present p]anting practices for establishment of the beautiful road landscape features, specially in planning, design, execution, establishment, and maintenance of plantings of the environmental conservation belts, roadside trees, footpathes, median strips, traffic islands, interchanges, rest areas, and including the adjoining route roads.

  • PDF

Effects of Applying Cattle Slurry and Mixed Sowing with Legumes on Productivity, Feed Values and Organic Stock Carrying Capacity of Winter Forage Crops in Gyeongbuk Regions (경북지역에서 액상우분뇨 시용과 콩과작물의 혼파가 동계사료작물의 생산성, 사료가치 및 단위면적당 유기가축 사육능력에 미치는 영향)

  • Hwangbo, Soon;Jo, IK-Hwan
    • Korean Journal of Organic Agriculture
    • /
    • v.21 no.3
    • /
    • pp.451-465
    • /
    • 2013
  • This study was conducted to estimate Hanwoo carrying capacity when whole crop barley, rye, wheat and tritcale as winter forage crops was grown on different applying sources (chemical fertilizer, cattle or organic fertilizer) and mixed sowing combination with hairy vetch or forage pea during the period of 2011~2012. The experimental plots within whole crop barley or rye were consisted of 7 treatments, which were non-fertilizer, chemical fertilizer (P+K), chemical fertilizer (N+P+K), organic fertilizer, cattle slurry, cattle slurry with hairy vetch, and cattle slurry with forage pea. Each plot was triplicates and experimental treatments were allocated in the randomized complete block design. For whole crop barley, annual mean dry matter (DM) and total digestible nutrients (TDN) yields were the highest in N+P+K plots, but there were no significant differences among organic fertilizer, cattle slurry and mixed sowing with legumes. The TDN were the highest in mixed sowing plots of forage pea plus cattle slurry application. As 450 kg Hanwoo heifers were fed diets included 70% whole crop barley, organic fertilizer, cattle slurry application and mixed sowing plots of forage pea is capable of raising average 2.8 to 3.1 heads/ha a year. For whole crop rye, annual mean DM were the highest in N+P+K plots, but there were no significant differences among cattle slurry. Organic fertilizer application significantly increased TDN and relative feed value (RFV) in comparison with treatments of N+P+K fertilization as chemical fertilizers. In case of 450 kg Hanwoo heifers fed diets included 70% forage rye, it is estimated that cattle slurry application (mixed sowing with legumes) plots can rear average 2.8~ 3.2 heads/ha a year. For whole crop wheat, annual DM, crude protein, and TDN yields of application groups and mixed sowing treatment with legumes showed 6.90~7.44, 0.53~0.60 and 4.35~5.04 ton/ha, respectively. In case of 450 kg Hanwoo heifers fed diets included 70% forage rye, it is estimated that cattle slurry application (mixed sowing with legumes) plots can rear average 3.1~3.7 heads/ha a year. For Triticale, TDN yield was significantly (P<0.05) higher N+P+K plots, organic ferilizer, cattle slurry, cattle slurry with legumes than for no fertilizer and N+P+K plots. The Crude protein (CP) contents were the highest in mixed sowing plots of forage pea plus cattle slurry application. In case of 450 kg Hanwoo heifers fed diets included 70% forage triticale, it is estimated that cattle slurry application (mixed sowing with legumes) plots can rear average 3.4~3.7 heads/ha a year. It can be concluded that, on the basis of DM yield, not only mixed sowing with legumes by applying cattle slurry rather than single sowing of whole crop barley or whole crop rye enhanced production yield and feed values, but also it could be a substitute for imported grains as dietary protein sources in the case of feeding Hanwoo.

A study on the noodle quality made from pea starch-wheat composite flour (완두 전분을 첨가한 국수의 품질특성)

  • 김은주;윤재영;김희섭
    • Korean journal of food and cookery science
    • /
    • v.18 no.6
    • /
    • pp.692-697
    • /
    • 2002
  • The purpose of this study is to investigate the characteristics of the doughs and noodles cooked with the pea starch-wheat composite flour which was substituted with 20% and 30% of pea starch for the flour by the mechanical and sensory evaluation. Wheat dough had the most cohesive property among various composite non.(p<0.05) There was no significant differences in weight gain after cooking among various noodles. The more the pea starch was subsituted, the lighter the color was shown by increasing L value. It was also noted that the b value was decreased significantly. While pea starch noodle were more transparent in appearance and less smooth in the texture, corn starch-wheat composite flour noodle was sorter in the texture significantly. There was no significant difference on the hardness between wheat and pea stach composite flour noodles. There were also no significant differences in stickiness, chewiness and overall acceptability among various noodles. Considering mechanical and sensory results, the composite flour with 20% substitution of pea starch for flour was more suitable for the production of the noodle than those of 30% substitution of pea starch.