• Title/Summary/Keyword: 면처리

Search Result 2,927, Processing Time 0.044 seconds

Experimental Study on the Material Characteristics of Concrete Surface Preparator with Inorganic Composite (무기질 복합체를 이용한 콘크리트 면처리재의 재료특성에 관한 실험적 연구)

  • 서치호;홍순조;전현규
    • Journal of the Korea Concrete Institute
    • /
    • v.13 no.3
    • /
    • pp.206-212
    • /
    • 2001
  • The purpose of this experimental study was to investigate the material properties of concrete surface preparator with inorganic composite, which was modified with plaster and admixture. A series of experiment were conducted to appraise the properties according to KS F 4716. The experimental results were as follows ; When the concrete surface preparator with inorganic composite was used, the hair crack and split, due to early drying shrinkage, was little. So it is superior to concrete surface preparator with cement paste plaster The bonding strength of concrete surface preparator with inorganic composite increased about 60% compared to that of concrete surface preparator with cement paste plaster. The workability of surface flatness and finishing was superior compared to that of existing concrete surface preparator. All specifications on concrete surface preparator were satisfied in the series of this experiments. Therefore, the concrete surface preparator with inorganic composite might be satisfactory applied in field due to its superior material properties.

The Low Temperature Plasma Treatment and Sputte Treatment Compare with Function of One-side Water Repellentcy (저온 Plasma가공과 Sputter가공에 의한 편발수 기능의 비교)

  • Ma, Jae-Hyuk;Koo, Kang
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2011.11a
    • /
    • pp.31-31
    • /
    • 2011
  • 섬유제품은 대부분은 흡수성 또는 흡유성을 가지고 있어 물이나 기름이 등을 쉽게 흡수하는 성질이 있다. 이러한 성질 때문에 물이나 기름 등의 접촉에 의한 얼룩과 오염이 잘 되는 단점을 가지고 있다. 이러한 문제점을 해소하기 위하여 원단에 대한 발수, 발유, 방오가공 등이 연구되어 왔으며 섬유의 고유한 화학적, 기계적 물성을 유지하면서 표면과 이면이 다른 특성을 가지도록 유도하여 기능성을 부여하는 편면가공을 주목을 받게 되었다. 본 연구에서는 불소계로 발수처리 된 PET직물에 저온 Plasma와 Sputter을 이용하여 직물의 한쪽 면에는 친수성과 다른 면에는 발수성이 동시에 나타나는 편발수에 관한 실험을 했다. 불소계로 발수처리 된 시료와 저온 Plasma처리된 시료와 Sputter처리된 시료(처리면, 미처리면)를 접촉각 5회 측정하여 평균값을 나타냈다. 발수처리 된 시료의 평균 접촉각 값은 $149^{\circ}$이며, 저온 Plasma의 평균값은 $45^{\circ}$(처리면) $128^{\circ}$(미처리면), Sputter는 $74^{\circ}$(처리면) $144^{\circ}$(미처리면) 으로 가공처리 된 시료에는 양면의 접촉각이 확연한 차이가 나타난 걸로 미루어 보아 편면발수효과가 얻어졌다고 판단된다. SEM 측정을 통하여 관찰한 경우, 발수처리 된 시료에서는 불소계 발수제의 흔적이 보였다. 저온 Plasma, Sputter 처리된 시료에서는 처리시간이 높아짐에 따라서 시료표면에 코팅된 불소계 발수제 막들이 점점 파괴되는 것을 관찰할 수 있었다. 그리고 건식가공으로 인하여 처리된 표면에는 Etching작용이 일어나 표면적이 넓어져 친수화가 일어난 것으로 생각된다. 이처럼 저온 Plasma가공과 Sputter가공으로 편발수를 얻을 수 있다면 에너지 절약, 처리공정과 시간단축 등 여러 가지 장점이 기대된다.

  • PDF

A Study on the Interface Shear Strength of HDPE Textured Geomembrane (HDPE 표면처리 지오멤브레인의 경계면 전단강도에 관한 연구)

  • Kim, Sejin;Youn, Heejung
    • Journal of the Korean GEO-environmental Society
    • /
    • v.17 no.2
    • /
    • pp.41-49
    • /
    • 2016
  • This paper evaluates the interface shear strength of HDPE textured geomembrane. The interface shear strength between textured geomembrane and marl, and textured geomembrane and woven geotextile were measured; and the smooth geomembrane was used to evaluate the effect of "texture" on the interface shear strength. The interface shear strength was measured using a large direct shear testing device under several conditions including the presence of water, and the normal stresses that were 12, 24, 45, 100, 500, and 1,000 kPa. From testing results, it was found that there was meaningful reduction in the interface shear strength in the presence of water, but the effect of normal stress was not clear. The interface shear strength was measured to be significantly different for smooth geomembrane, whose strength was measured to be as small as half that of the textured geomembrane.

Effects of Organic Acids on Textural Properties and Storage Stabilities of Long Life Noodles (유기산의 첨가에 따른 Long Life 면의 조직감과 저장 안정성)

  • Jeong, Jae-Hong
    • Journal of the Korean Society of Food Culture
    • /
    • v.13 no.3
    • /
    • pp.191-196
    • /
    • 1998
  • The influence of organic acid dips on the quality properties, color, cooking quality, textural and sensory properties, and reducing microbial population of LL(Long Life) noodles was studied. The contents of organic acid used were 0.2% based on flour weight and LL noodles were treated by dipping in pH $2.5{\pm}0.1$ for $60{\sim}90sec$. The whiteness of LL noodles treated with dl-malic acid was higher than that of others. The shear extrusion force and hardness of LL noodles treated with dl-malic acid were shown much higher value than those of others except treated with dl-malic acid. acetic acid(=1:1). At cooking quality examination of LL noodles treated with organic acids, weight of cooked LL noodles treated with dl-malic acid was decrease but volume was appeared in vice versa. Extraction amounts of LL noodles treated with dl-malic acid, dl-malic acid : acetic acid(=1:1) during cooking were much smaller than those of others. Total counts of microorganism of LL noodles treated with dl-malic acid,dl-malic acid. acetic acid(=1:1) were disappeared during storage at $30^{\circ}C$ but treated with latic acid, acetic acid were increase during storage. Sensory properties of cooked LL noodles which was treated with dl-malic acid showed quite acceptable.

  • PDF

A Modified FSA Technique Using Full-aperture for SAR Spotlight Mode (SAR 집중조사모드를 위해 전 개구면을 사용하는 수정된 FSA 기법)

  • Jung, Young-Kwang;Ra, Won-Sang
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.44 no.10
    • /
    • pp.921-932
    • /
    • 2016
  • In this paper, a modified FSA(Frequency Scaling Algorithm) is proposed for KOMPSAT-5 high-resolution SAR image generation. In order to enhance performance of azimuth compression, degraded in sub-aperture processing due to the imperfect geometric parameter of data acquisition, the full-aperture signal processing algorithm is designed based on the exact time-frequency analysis. In addition, an azimuth scaling function is newly devised to make the full-aperture processing algorithm suitable for KOMPSAT-5 sliding-spotlight mode. Different from the previous sub-aperture FSA schemes, the suggested technique could accommodate the merit of unified signal processing structure regardless of operational modes of KOMPSAT-5. Through the point target simulation, it is verified that the suggested algorithm provides superior performance of azimuth compression over the existing full-aperture processing methods. The experimental results using real data acquired by KOMPSAT-5 are also given to demonstrate the effectiveness of our scheme as well.

Effect of Blending Rate of Waste Rockwool in Nursery Media on Growth of Marygold Plug Seedlings (육묘용 상토내의 폐암면 혼합비율이 메리골드 플러그묘의 생육에 미치는 영향)

  • Jun, Ha-Joon;Hwang, Jin-Gyu
    • Journal of Bio-Environment Control
    • /
    • v.16 no.1
    • /
    • pp.27-31
    • /
    • 2007
  • The experiment has investigated the effects of blending rate of waste rockwool in nursery media on growth of Marygold 'Yellow boy' plug seedlings. A commercial plug medium containing 10% zeolite, 10% vermiculite, 5% perlite, 10% peatmoss and 65% cocopeat was used as the control, and the other media compounded with 10% of zeolite, vermiculite, perlite and peatmoss and 10, 30, and 50% of waste rock-wool. There was not significant difference in germination rate ot Marygold between treatments. Plant height, number of leaves, stem diameter and leaf area were higher in commercial plug medium and compound nursery media containing 50% of waste rockwool than 30 or 10% of waste rockwool. Fresh weight and dry weight of shoot and root increased in the treatment of commercial plug medium and the medium of 50% waste rockwool than 10 and 30% of waste rockwool. These results suggested the possibility of utilization of waste rockwool for medium components of plug seedlings.

Generation of Running Motion on Complex Terrain (복합 지형에서의 달리기 동작 생성에 대한 연구)

  • Song, Mi-Young;Cho, Hyung-Je
    • Annual Conference of KIPS
    • /
    • 2004.05a
    • /
    • pp.153-156
    • /
    • 2004
  • 이 연구에서는 동작 포착 데이터에서 최적의 동작을 얻기 위한 비용과 시간을 줄이고, 캐릭터의 체형 크기에 무관하게 복합 지형에서 적응적인 이동 동작을 빠르고 효율적으로 생성하는 방법을 제안한다. 즉 캐릭터의 신장이나 걷는 속도, 걸음폭 등의 매개변수들을 사용하여 평지면, 경사면, 계단면 그리고 굴곡면 등 다양한 지형에서의 달리기 동작을 생성하며 역운동학(Inverse Kinematics) 개념을 적용하여 관절들의 위치나 각도를 산출하고 관절의 이동 궤적을 계산하기 위해 큐빅 스플라인 곡선을 활용한다.

  • PDF

A Narrowband Detection Performance for Small Objects on Seabed by the Active Synthetic Aperture Sonar (능동 합성개구면소나에 의한 해저 소형물체 협대역 탐지 성능 고찰)

  • Kim, Boo-Il
    • Journal of the Korea Society for Simulation
    • /
    • v.23 no.4
    • /
    • pp.41-49
    • /
    • 2014
  • Detection and processing techniques for small objects on seabed by the active synthetic aperture sonar can be increased the detection performance because it can be used by short sensor array in small unmanned underwater systems that are spatially constrained. But the limited conditions on constant speed and straight movement of the platform cause a large error in the number of external environmental factors and exact phase synthesis process. In this study, analyzed the applicability of active synthetic aperture processing that is mounted on such a system, and compared detection resolution change in accordance with the phase difference mismatch caused by the along track disturbance. Various simulations were performed as a coherently focus processing model by adding along track disturbance mismatched parameter on the configuring simulator. As the result, detection performance of active synthetic processing for small objects on seabed was found a number of changes by the phase difference mismatch errors according to track disturbances and S/N ratio variations.

Characteristics of Transparent Conductive Films of Single-Walled Carbon Nanotubes with Treatment of Surfactants and Nitric Acid

  • Kim, Myeong-Su;Gwak, Jeong-Chun;Lee, Seung-Ho;Lee, Nae-Seong
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2009.05a
    • /
    • pp.32.1-32.1
    • /
    • 2009
  • 현재 ITO를 대체할 재료로 투명 전도성 탄소나노튜브(carbon nanotube, CNT) 필름에 대한 연구가 진행 되고 있다. 이러한 연구에서 특히 CNT 필름의 투과도에 따른 전기저항을 향상시키기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 단일벽 CNT (single-walled CNT)를 여러 가지 계면활성제로 최적 분산시킨 수용액으로부터 제조한 CNT 필름의 투과도에 따른 면 저항 (sheet resistance) 변화를 관찰하였다. 우선 계면활성제로 분산시킨 CNT 수용액을 알루미나 재질의 필터에서 정량적으로 진공 필터링하여 CNT 필름을 제조하였다. 알루미나 필터를 sodium hydroxide (NaOH) 수용액으로 용해시켜 제거함으로써 얻은 CNT 필름을 유리기판 위에 부착시켰다. 필름의 전기저항을 낮추기 위해 유리기판 위에 부착된 CNT 필름을 질산 (HNO3) 용액으로 처리하였다. Scanning electron microscopy, UV-Vis spectroscopy를 이용하여 각각 필름의 형상과 광 투과도를 분석하였고, 4-point probe로 면 저항을 측정하였다. 계면활성제로 분산시킨 CNT 필름 대부분의 면 저항은 질산 처리에 의해 감소하였다. 이는 CNT 표면에 코팅되어 있던 계면활성제가 질산에 의해 제거되었기 때문인 것으로 예상된다. 여러 계면활성제 중 sodium dodecyl benzenesulfonate로 분산시킨 CNT 필름이 산 처리 후에 가장 낮은 면 저항을 보였다. 그리고 Polyvinyl pyrrolidone (PVP)과 cetyltrimethylammonium bromide (CTAB)를 사용하여 제조한 CNT 필름의 면 저항이 가장 뚜렷한 감소를 보였다.

  • PDF

The Design of DID Non-Face-To-Face Education Platform on Blockchain (블록체인 기반 DID 비대면 실습교육 플랫폼 설계)

  • Kong, Young-Jae;Chang, Hang-Bae
    • Annual Conference of KIPS
    • /
    • 2021.11a
    • /
    • pp.352-354
    • /
    • 2021
  • 코로나 19의 확산으로 인해 온·오프라인의 경계가 희미해짐과 동시에 비대면 형태 서비스가 확산되고 있으며, 교육 분야에서도 비대면 화상 강의와 원격수업의 적용이 일상화되고 있다. 기존의 비대면 화상 강의 시스템의 경우, 피교육자 신원확인 미흡에 따른 비인가자 접근 및 교육 방해 행위가 발생하였고, 교육내용 및 보고서 등 교육자와 피교육자 간 송·수신 내용 노출의 위험성이 있으며, 대량의 트래픽 유발에 따른 수업 방해가 가능하여 보안상의 대책이 요구된다. 본 논문에서는 기존의 비대면 형태의 피교육자 신원확인 미흡에 따른 비인가 접근 및 교육 방해 행위와 교육자와 피교육자 사이의 송·수신 내용의 위험성을 해결하고, 대량의 트래픽 유발에 따른 수업 방해에 대한 보안대책으로 블록체인 기반 DID 비대면 실습교육 플랫폼 설계를 제안한다.