• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.869-877
• /
• 2018

The area of desert in East Asia is increasing every year, and it cause a great cost of social damage. Because desert is widely distributed and it is difficult to approach people, remote sensing using satellites is commonly used. But the study of desert area comparison is insufficient which is calculated by satellite sensor. It is important to recognize the characteristics of the desert area data that are calculated for each sensor because the desert area calculated according to the selection of the sensor may be different and may affect the climate prediction and desertification prevention measures. In this study, the desert area of Northeast Asia in 2001-2013 was calculated and compared using Moderate Resolution Imaging Spectroradiometer (MODIS) and Vegetation. As a result of the comparison, the desert area of Vegetation increased by $3,020km^2/year$, while in the case of MODIS, it decreased by $20,911km^2/year$. We performed indirect validation because It is difficult to obtain actual data. We analyzed the correlation with the occurrence frequency of Asian dust affected by desert area change. As a result, MODIS showed a relatively low correlation with R = 0.2071 and Vegetation had a relatively high correlation with R = 0.4837. It is considered that Vegetation performed more accurate desert area calculation in Northeast Asian desert area.

• Journal of the Korean earth science society
• /
• v.41 no.1
• /
• pp.31-39
• /
• 2020

Cheonji, the largest caldera lake in Asia, is located at the summit of Baekdu Mountain. Cheonji is covered with snow and ice for about six months of the year due to its high altitude and its surrounding environment. Since most of the sources of water are from groundwater, the water temperature is closely related to the volcanic activity. However, in the 2000s, many volcanic activities have been monitored on the mountain. In this study, we analyzed the dimension of ice produced during winter in Baekdu Mountain using Sentinel-1 satellite image data provided by the European Space Agency (ESA). In order to calculate the dimension of ice from the backscatter image of the Sentinel-1 satellite, 20 Gray-Level Co-occurrence Matrix (GLCM) layers were generated from two polarization images using texture analysis. The method used in calculating the area was utilized with the Support Vector Machine (SVM) algorithm to classify the GLCM layer which is to calculate the dimension of ice in the image. Also, the calculated area was correlated with temperature data obtained from Samjiyeon weather station. This study could be used as a basis for suggesting an alternative to the new method of calculating the area of ice before using a long-term time series analysis on a full scale.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.161-161
• /
• 2011

지진, 산사태, 액상화 등의 지질재해 예측을 위한 지역적 지반특성을 규명하기 위해서 지질도 또는 지형도를 이용하여 간접적인 방법이 사용되기도 한다. DEM에서 추출한 경사도는 지반분류 시 하나의 기준으로 사용되어질 수 있고, 이때 DEM의 해상력에 따라 그 결과가 다르게 산출될 수도 있다. 이번 연구에서는 DEM의 해상력에 따라 우리나라 일부지역의 지반분류 결과에 어떤 영향을 미치는지 살펴보았다. 각기 다른 해상도의 DEM을 적용하여 우리나라 동남부 지형을 경사도 기준으로 지반분류한 후 그 면적차이를 해상도별로 비교한 결과, 지반분류 C 지역의 면적 변화가 가장 뚜렷하였다. $V_s30$ 범위로 분류한 결과에서는 180 m/sec 이하의 지역에서 해상도별로 가장 큰 변화가 있었다. 고해상도에서는 지반분류 B와 E의 지역에서 면적이 저해상도 보다 크게 산출되는 경향이 있었고, 저해상도에서는 지반분류 C와 D 지역의 면적이 고해상도 보다 크게 산출되는 경향이 있었다. 이는 DEM의 해상도가 낮아질수록 각기 다른 지반정보를 함유한 작은 셀이 큰 셀로 만들어지는 과정에서 평균화되는 지반정보가 과대평가 또는 저평가되었기 때문이다. 연구지역 내 시추지역의 지반과 지반분류 결과를 비교하면 해상도별로 78%~52%까지 일치하였고, 고해상도에서 일치율이 더 높았다. 지형의 변화가 심하고 인구나 산업시설이 밀집된 재해 고위험군 지역은 고해상도의 지도를 이용하고, 지형의 변화가 없거나 단단한 지반의 지역은 재해가 상대적으로 작아서 저해상도의 사용으로 자료처리 시간의 효율성을 증대시키는 방안도 생각할 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.867-870
• /
• 2003

현재 한국과 일본은 실제 대지선을 디지털 맵으로 정비되어 있지 않은 상황에 따라 실 대지선에 대한 근접한 이론적 대지 선을 산출 및 작도하여 시가지 분석에 조력의 역할을 도모하게 하는 것을 목적으로 본 연구를 수행하였다. 도로와 건물간의 관계와 건물과 건물간의 위상관계를 감안하고 GIS 기술을 적용하여 이론 대지면적을 추출하고 실제측량에 의한 실제 대지와의 차의 정도를 파악하여 시가지 공간분석에 있어서의 필수 불가결한 평면적인 토지이용상황을 나타내는 지표인 건폐율을 산출하는데 필수 불가결한 대지면적산출의 정합성을 증명하였다.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.137-153
• /
• 2016

The price of agricultural products has changed from year to year, the m ajor c ause o f price fluctuation is the imbalance of supply and demand. Materials which are mainly used in korean cabbage production volume is the forecast model, using the cadastral result, slope calculation is impossible to achieved. For this reason, this implies the drastic decrease of prices and the prediction of supply and demand of field crops that is cultivated in a highland slope area, this situation is being repeated. Therefore, the target area of this research is the slopes of high land, by using 2D and 3D Lidar data for the analysis of the cultivated area. Experiment was carried out in the same area to compare the data differences. The rate of change in the area of slope is quantitatively increasing presented by the regression model. An alternative methodology that can improve the reliability of the calculated slope area using 2D is through cadastral map.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.135-142
• /
• 2020

In the recent farming industry, there is a growing diffusion of drones, which are recognized as a crucial technology of the 4 th industrial revolution to cope with aging. Especially, filming and pest control using drones are representative fields that have different age groups for obtaining a national license of multicopter that is a ultra-light flying device, and can create profits after getting a license. However, pest control technology using drones has different spray effects depending on levels of operational proficiency, since this highly relies on an operator's operating skills. It is anticipated that if this issue is supplemented, the use of drones for pest control in the farming industry will diversify. For analysis of spraying characteristics of agricultural pest control drones, this study aims to formulate effective spraying hours and effective spraying intervals and suggest an algorithm, which facilitates an accurate calculation of pest control area depending on the kinds of pest control drones. This algorithm can be used in the field of pest control by improving scatterling issues caused by drone flight methods of drone pest controllers and building an optimum pest control manual in future.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.59-71
• /
• 2019

The distribution logistics center has its own inventory, so designing an efficient storage area is very important. The purpose of this study is to present the optimal storage area calculation method for distribution logistics center considering the use of standard pallet unit load, and the results of this study are as follows. First, standard rack modules for storing T-11 and T-12 type pallet, which is generally used in Korea, were defined. Second, a variety of pallet transport equipments were investigated and analyzed to define the standard transport equipment's work passageway by type. Finally, it has great implications in terms of suggesting measures to minimize unused space that may occur during placement of pallet rack modules within storage space, as well as the easy and optimal calculation of the storage area for the distribution logistics center. Future research require a study on the layout of the entire distribution logistics center, which reflects the latest logistics technologies, such as standard rack modules for Mini-Load and GTP picking system.

• Journal of the Korea Society for Simulation
• /
• v.28 no.1
• /
• pp.99-107
• /
• 2019

Until now it has had the limitation of the target in the US JMEM to calculate the Pk with the existing method by our study. In this study, we focused on deriving a method to calculate the Pk of the actual targets except JMEM targets using ANN. We study the initial predictive model of ANN(Artificial Neural Network) from the targets data of the specification and the vulnerable area in the US JMEM(Joint Munitions Effectiveness Manuals), and calculate the actual targets vulnerable area by using this method. Finally, we propose a method to calculate the Pk by applying those data to the existing method of us.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.628-628
• /
• 2015

유역의 형상은 강우, 산사태 등과 같은 지배적인 침식작용과 더불어 지형 지질학적 요인들에 의해 결정되어 진다. 그러므로 유역형상에 대한 공간특성 분석을 위해서는 지형학적 요인과 다양한 침식작용에 대한 분석이 필요하다. 국내 외 많은 연구결과에 의하면 지형학적 인자에 의한 침식 형태는 국부경사와 집수면적의 크기에 의해 다양한 구간으로 나뉘며, 그 특성에 따라 지표침식, 세굴, 산사태 등으로 구분되는 것으로 연구된 바 있다. 일례로 유역 내 세굴과 관련된 지배인자는 집수면적보다는 국부경사에 반대로 지표침식, 산사태는 국부경사보다는 집수면적의 크기에 따라 영향을 받는다. 따라서 지형학적 인자(국부경사, 집수면적)의 임계치(threshold) 산출을 통해 침식특성(불안정지역)을 검토할 수 있으며, 이에 대한 물리적 검증은 여러 연구를 통해 물질플럭스(유량, 에너지)에 대한 Power Law로써 검증된바 있다. 본 연구에서는 이러한 지형학적 침식특성 분석을 위하여 2006년 집중호우에 의해 광역적 산사태가 발생한 강원도 평창군 진부면 일대의 $10m{\times}10m$ DEM로부터 국부경사, 집수면적을 산출하고 경사-면적한계곡선(Slope-Area Threshold Curve, SATC), 배수면적 확률분포곡선(Probability distribution of Drain Areas Curve, PDAC), 에너지지수 확률분포곡선(Probability distribution of Energy Index Curve, PEIC)를 실제 산사태지점과 중첩하여 도시하였다. 그 결과, 특정 임계구간(Threshold Area, Unstable area, 2~3권역)내에서 산사태 발생지점이 분포하는 것으로 분석되었다. 이를 통해 지형학적 인자만을 고려하여 미계측 유역에 대한 잠재적 불안정지역의 판별이 가능할 것으로 판단되며, 추후 광역적 사면안정해석에 적용 가능할 것으로 판단된다.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.504-511
• /
• 2020

This study estimated planned felling volumes to set targets for management planning of nationwide country-owned forests. Estimates were made using timber harvest prediction methods that use probability density functions, including area weighting (AW), area ratio weighting (ARW), and sample area change ratio weighting (SCRW). Country-owned forest areas in 2010 and 2015 were used to estimate planned felling volumes, as shown in basic forest statistics, and calculations were made assuming that the felling areas were the changes in the forest area over the 5-year period. For the age classes of V-VI, the average felling ages for AW, ARW, and SCRW were 5.41, 5.56, and 5.37, respectively, and the felling areas were 594,462, 586,704, and 580,852 ha, respectively, with ARW reaching closest to the actual changes. The actual changes in the areas and chi-squared test results were most stable with the SCRW method. This study showed that SCRW was more adequate than AW and ARW as a method to predict timber harvests for forest management planning.