• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.180-189
• /
• 2006

Mercerization of cotton fabrics affects their various properties including physical properties and dyeing behavior. In this study, the concentration levels of NaOH solution, with 18% and 25%, and the mercerization temperature levels, $22^{\circ}C,\;10^{\circ}C$, and $5^{\circ}C$, were changed in order to investigate the physical properties and dyeing behavior using Gardenia, a natural dyestuff, and direct dyes. The effect of tension during the mercerization was also investigated. In order to investigate the dyeing behavior of Gardenia, a direct dyestuff was employed as a comparative material for better objective analysis and evaluation. It was found that the mercerization condition of 18% NaOH concentration at $10^{\circ}C$, without tension, resulted in the highest ${\Delta}E$ value, when dyed with Gardenia.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.82-87
• /
• 2001

본 연구에서는 PET 직물의 물성개선과 품질의 향상을 위해 직물 제조 공정 중 제직준비공정인 1TY, P/W, 2-FOR-1공정에서 여러 가지 공정인자의 변화를 주어 염색·가공 공정을 거친 최종 11가지 직물의 역학적 특성치 및 각 공정별 시료의 물성을 측정하여 의류의 감성특성은 Handle, 의복성능 및 봉제성을 평가하여 직물 제조 공정특성이 의류 감성에 미치는 영향에 대해 분석하였다. 그 결과 1TY, P/W, 2-for-1공정에서 균일하고, 안정된 장력으로 제조한 직물은 신축성 및 drape성이 장력이 과다하게 주어진 직물보다 우수하고, 의류봉제시 신장성이 양호한 봉제 범위를 가져 의복 착용시 감성면에서 부드럽고 쾌적한 성능을 가진다. 그리고 공정에서 고장력, 고속의 spindle 회전은 사물성 및 직물의 물성변화를 야기시키고 교략강도의 불안정성으로 최종 직물에서 유연성과 탄력성 및 volume감이 떨어지는 의류촉감을 가지며 또 stiff한 의류 감성을 나타냄으로서 의류용 소재로는 부적당함을 확인하였다.

• Fashion & Textile Research Journal
• /
• v.12 no.2
• /
• pp.219-223
• /
• 2010

In this study, the comfort properties of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite were evaluated and compared. Results were as follows; 1) W/T values and WC/W values of cotton and Hanjee fabrics were decreased when they were dyed with Inonotus obliquus and treated with illite. 2) Although air permeability of cotton fabrics was higher than that of Hanjee fabrics, air permeability of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite was decreased. 3) Thermal conductivity of cotton and Hanjee fabrics dyed with Inonotus obliquus was increased whereas thermal retain property was decreased. 4) Water absorption of Hanjee fabrics was higher than that of cotton fabrics. Water absorption of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite was increased. 5) Deodorization rate of Hanjee fabrics was greater than that of cotton fabrics.

• Fashion & Textile Research Journal
• /
• v.3 no.2
• /
• pp.168-173
• /
• 2001

In order to overcome the disadvantage of the conventional two bath dyeing method of wool/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish savings in energy, water usage and time. To improve the dyeability of cotton toward direct dyes in a non-electrolytic and acidic dyebath, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate almost equal color strength between wool component and cationized cotton component when wool/cationized cotton blends was dyed with acid dye/direct dye by the one bath two step method in a non-electrolytic and acidic dyebath.

• Journal of the Korean Home Economics Association
• /
• v.30 no.2
• /
• pp.45-52
• /
• 1992

The dyeing characteristics of Dylon hand dyes on the cotton & silk fabric were studied, and the fastnesses of Dylon hand dyes were compared with those of direct & acid dyes. The results are as follows. 1. Dye adsorption of Dylon hand dyes increased as the concentration of dye increased. 2. Dye adsorption was increased as treatment time increased, and reached to eqilibrium after forty minutes treatment. 3. The temperature at mixiumum adsorption was 6$0^{\circ}C$, in the range of lower temperature than 6$0^{\circ}C$ color was changed, in the range of higher temperature adsorption of dye was decreased. 4. Dye adsorption was increased in direct proprotion to NaCl concentration and reached to equilibrium. But NaCl concentration of even and maximum adsorption was 5%. 5. Wash fastness of Dylon hand dyes was better than direct & acid dyes, but light fastness was worse.

• Korean Journal of Human Ecology
• /
• v.5 no.2
• /
• pp.93-99
• /
• 2002

In this paper, the effect of the mud of an inorganic substance dyed on cotton knitted fabrics have been studied. The structure and chemical composition of mud was analyzed. And the far-infrared emissivity and emission power, colorfastness, anti-bacterial properties cotton knitted fabrics dyed with mud were also evaluated. The structure and chemical composition of mud was almost identical structure and to be alike main components were SiO2, A1203 and Fe203. The cotton knitted fabrics dyed with mud have good components and anti-bacterial properties. when the dyed fabrics was after-treated with diphenyl ether, the anti-bacterial property were improved. Far-infrared emissivity and emission fewer cotton knitted fabrics dyed with mud have very good.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.275-276
• /
• 2008

광 검출기 앞에 미세한 구멍을 대물렌즈의 켤레 초점면에 놓음으로써 초점에 정확하게 일치하는 빛만 검출하는 공초점 광학 현미경은 마이크로미터 이하의 불투명한 샘플 표면, 구조뿐만 아니라 투명한 샘플인 경우 절단 없이 선택적으로 단면을 관찰하는데 사용된다. 이런 장점 때문에 특정 원자나 분자에 인위적으로 염색 시킬 수 있는 형광물질을 사용하여 세포의 기관 구조나 세포 기관간의 활동을 3차원적으로 관찰하는 생물학연구에서도 공초점 광학 현미경이 사용된다. 본 논문에서는 공진 스캔 미러를 이용하여 공초점 광학 현미경을 구현 하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1207-1216
• /
• 1988

The most 3-Dimensional problems of composite materials, especially three-dimensional stress or strain distribution on jointed boundary in composite materials remains unsolved due to the limitations of analytic techniques. The purpose of this paper is to apply the Embedded Grid Method to model development to measure the three-dimensional strain distribution along the jointed boundary of composite materials which consist of two different materials. It was confirmed that the Embedded Grid Method was very useful in model development and measuring the three-dimensional strain distribution in a local region near the jointed boundary.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.485-491
• /
• 2002

Dyeing properties of rosemary colorants on cotton fabrics were investigated. Effect of dyeing conditions on dye uptake and effect of mordanting and cationizing on dye uptake, color change and colorfastness were explored. Also, antimicrobial activity of rosemary colorants was ascertained and further effect of cationizing on antimicrobial activity was investigated. Affinity of rosemary colorants to cotton fiber was considerably low, and its isotherm adsorption curve was Freundlich type, indicating that hydrogen bonding was involved in the adsorption of rosemary colorants to cotton fiber. The cotton fabrics showed generally high colorfastness except fastness to washing and light. The cationized cotton with Cationon UK(quarterly ammonium salt) showed higher dye uptake and shorter dyeing time, compared with the untreated cotton. The cationized cotton showed good colorfastness to washing, perspiration and rubbing. Antimicrobial activity of rosemary colorfastness was confirmed. The cationized cotton itself showed high bacterial reduction rate. For cationized and dyed samples, as dye uptake increased, bacterial reduction rate was decreased slightly.