• Journal of the Korean Chemical Society
• /
• v.52 no.6
• /
• pp.657-662
• /
• 2008

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.907-913
• /
• 1997

Alkyd modified polyester was synthesized by the polycondensation of 1,4-butanediol, trimethylolpropane, adipic acid, and the intermediate obtained by the esterification of 3,5,5-trimethylhexanoic acid(THA) and trimethylolpropane, where the contents of THA as a component of alkyd polyol in the intermediate were changed according to 10, 20, and 30wt%, respectively. Two-component polyurethane coatings were prepared by blending the synthesized alkyd modified polyester with Desmodur L-75 as a component of polyisocyanate. Various tests for coating properties with the prepared coatings show that high fineness of grind of $8^-$point, short drying time of 2~3 hours, and long pot-life of 18~23 hours were observed with the content of 3,5,5-trimethylhexanoic acid.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.228-233
• /
• 2007

The high cost and lack of vegetable oil are limiting the expansion of biodiesel production. The purpose of research was to investigate the potential of animal fats as biodiesel feedstock. In this paper, transesterification using alkali catalyst and methanol was performed to reaction, we carried out experiments that it was changed variables as reaction temperature, methanol molar ratio, catalyst types, amount of catalyst and reaction time. The optimum reaction condition for biodiesel production was reaction temperature 65$^{\circ}C$, potassium hydroxide 1.0% (w/w), oil to methanol molar ratio 1:15 and reaction time 20 min. In this reaction condition, the contents of fatty acid methyl ester was reached to about 98.7%. Also, properties of biodiesel were measured to correspond to domestic quality standard of acid values, density and viscosity.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.222-227
• /
• 2007

Biodiesel (fatty acid methyl esters) have used to as substitutes for petro-diesel by mixed-form with petro-diesel. In several processes of biodiesel production, alkali-catalyst transesterification produced to biodiesel of high contents with short reaction time. In this study, we investigate the optimal condition of alkali-catalyst transesterification of rapeseed oil produced at Jeju island in Korea using response surface methodology. The optimal condition of biodiesel production is reaction temperature 59.7$^{\circ}C$, catalyst amount 1.18%, oil to methanol molar ratio 1:8.75, and reaction time 5.18 min. At that reaction condition, the fatty acid methyl ester contents of product are above 97%. Our results may provide useful information with regard to the development of more economic and efficient biodiesel production system.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.391-398
• /
• 2001

Two-component polyurethane (PU) flame-retardant coatings were prepared by blending tribromo modified polyesters ($TBAO_s$) and isocyanate.$TBAO_s$ were synthesized by condensation polymerization of tribromoacetic acid, a flame-retardant component, with 1,4-butanediol, adipic acid, and trimethylolpropane. The content of tribromoacetic acid was varied by 10, 20, and 30 wt% for the reaction. Various physical properties of these new flame-retardant coatings were comparable to nonflame-retardant coatings. Coatings with 20 wt% tribromoacetic acid did not burn during the vertical burning test.

• Magazine of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.49-54
• /
• 2002

아직까지 우리나라에서 폴리머 시멘트 콘크리트가 콘크리트와 같이 광범위하게 사용되고 있는 것은 아니지만 건설재료로서의 사용이 증가하는 추세에 있다. 폴리머 콘크리트의 제조에는 결합재로서 물이나 시멘트가 전혀 사용되지 않고 수지(resin)만을 사용한다. 각종 수지가운데 많이 이용되고 있는 것은 에폭시 수지, 불포화 폴리에스테르 수지, 우레탄 수지, 퓨란 수지 등이 있다. 그러나 원료사정이 국가마다 다르기 때문에 폴리머 콘크리트의 결합재로 사용되는 액상수지 역시 차이가 있다. 우리나라의 경우는 에폭시수지, 불포화 폴리에스테르 수지 및 우레탄 수지가 주로 사용되고 있으며, 가까운 일본의 경우는 폴리머 콘크리트의 결합재로서 워커 빌리티, 저온경화성, 내후성 등이 우수한 메타크릴산 메틸도 사용되고 있다. 또한 폴리머 모르타르 및 콘크리트의 경화반응에 방해를 주지 않도록 충전재 및 골재 등은 건조시켜 함수율이 0.5 % 이하가 되도록 사용하고 있으나, 지금은 흡수제, 가교제 등의 혼화재료가 개발되어 함수율을 3% 까지 허용하고 있으며, 지금까지 불가능하게 생각되었던 폴리머 콘크리트에 대한 레디믹스트 콘크리트(레미콘) 개발도 흥미를 끌고 있다.(중략)

• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.191-196
• /
• 2001

${\alpha},{\beta}$-Unsaturated carboxanilides 5 with trifluromethylated dihydro-1,4-oxathiins were synthesized for the development of new agrochemical fungicide. Chlorination of trifluoromethylated ${\beta}-keto$ ester 6 followed by the reaction with 1,2-mercaptoethanol gave intermediate 1,4-oxathiane 11. Without purification of 11, substitution of hydroxy group by chlorine, followed by dehydrochlorination of 10 in the presence of triethylamine afforded trifluoromethylated dihydro-1,4-oxathiin ethyl ester 9. Acylation of the hydroxy group of the carboxylic acid 12 followed by treatment of various amines gave the corresponding trifluoromethylated dihydro-1,4-oxathiin carboxamides 5. Antifungal screening (in vivo) of the synthesized compounds against typical plant diseases, which include rice blast, rice sheath blight, cucumber gray mold, tomato late blight, wheat leaf rust, and barley powdery mildew, was carried out. Where meta position of the phenyl group was substituted with isopropoxy or isopropyl group, excellent antifungal activities against rice sheath blight and wheat leaf rust were detected.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.72-77
• /
• 2015

In this study, anti-foaming agents of a fatty acid methyl esters was synthesized and confirmed by FT-IR and $^1H-NMR$ spectroscopy. Synthesized material of characteristic of -C=O group having a $1740cm^{-1}$ and -C-O group $1175cm^{-1}$ peak by using FT-IR, and it was confirmed that k. Surface tensions were measured by surface tensiometer CBVP-43. Their surface tension values was 17.7 to 21 dyne/cm. Anti-foaming abilities in the SLS solution was measured through the Ross-Miles method. Performance of the 4 type of anti-foaming agent was determined and the best anti-foaming agent was prepared using stearic acid methyl.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.595-602
• /
• 1998

${\alpha}$-sulfonated fatty acid methyl esters[$C_mH_{2m+1}CH(SO_3Na)COOC_nH_{2n+1}$], where hydrophobic group has carbon number of 12~18, were prepard by sulfonation of fatty acid methylester. The mole ratio of $SO_3$ to ester used was 1.3 and the reaction temperature was $70{\sim}90^{\circ}C$. The yield was found to be 97% by mixed gas reaction of inactive gas/gaseous $SO_3$. Studies on bleaching and neutralization processes in the pilot scale provided conditions applicable to industrial synthesis process.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.205-210
• /
• 2015

In this paper, microalgae lipid extractions were performed using conventional organic solvent and supercritical carbon dioxide (SC-$CO_2$) for biodiesel-convertible lipid fractions. The highest levels (58.31%) of fatty acid methyl ester (FAME) content in the lipid extracted by SC-$CO_2$ was obtained, and 18.0 wt.% crude lipid yield was achieved for Bligh-Dyer method. In the SC-$CO_2$ extraction, methanol as a co-solvent was applied to increase the polarity of extract. The experimental results indicated that crude lipid yield, FAME content and yield extracted by combination of SC-$CO_2$ with methanol were 12.5 wt.%, 56.32% and 7.04 wt.%, respectively, and this method could reduce the extraction time from 2 hour to 30 min when compared to SC-$CO_2$ extraction. Therefore, SC-$CO_2$ extraction is proven to be an environmentally-friendly and an effective method for lipid extraction from microalgae.