• Journal of Engineering Education Research
• /
• v.11 no.3
• /
• pp.33-43
• /
• 2008

In this paper, mechatronics education in South Korea is analyzed and its improvement is proposed. For this purpose, discussion on the definition and evolution of mechatronics in South Korea, USA and EU is deployed first. It is revealed that most of the mechatronics education in USA and EU is remained in cross-disciplinary stage or curriculum stage, whereas that in South Korea is evolved to curriculum stage or organizational stage. The comparison of mechatronics curriculum between Korea and other countries and the problems of mechatronics education are included. The automation of machinery and factory plays one of major roles in mechatronics education in Korea, while mechatronics curriculum in USA and EU does not emphasize the automation. Mechatronics experiment in South Korea is organized to meet the National Qualification Test on mechatronics, and it is recommended to be more inventive. The way of improving the National Qualification Test of South Korea on mechatronics field is proposed. And, finally, efficient way of linking technical high school and university in mechatronics education is also proposed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.331-334
• /
• 2020

항만에서 액체화물 취급이 증가함에 따라 로딩암의 사용빈도가 늘어나고 있다. 이에 본 논문에서는 로딩암 교육생들이 실전에 투입되기 전에 충분히 교육할 수 있도록 교육용 시뮬레이션을 제시한다. 그와 더불어 시뮬레이션과 연동되는 로딩암모형의 디지털트윈 연동을 통해, 교육생들의 로딩암 조종기술 향상을 이루어, 보다 안전한 로딩암작업과 항만의 액체화물사고 빈도를 크게 줄일 것으로 기대한다.

• Ceramist
• /
• v.19 no.4
• /
• pp.74-79
• /
• 2016

창원대학교 스마트융합 메카트로닉스 인력양성 사업단의 교육 목표는 1) 창조적 교육과정을 통한 지역거점 특성화, 2) 세계적인 수준의 경쟁력을 갖춘 기술 인력 양성, 3) 분석력, 창의력, 적응력 및 설계능력을 갖춘 능동적 기술인력 양성, 4) 시대의 환경변화를 선도하는 진취적 기술인력 양성, 5) 인재공급 및 취업률향상으로 정하였다. 이를 달성하기 위한 교육전략은 1) Major전문성(메카트로닉스심화, 공통실험교육 강화), 2) Global국제적감각(팀기반능력, 근접학문이해능력), 3) Creative지속성장 (Capstone Design, 현장적응교육)으로 정하였다. 따라서 메카트로닉스공통융합심화트랙 교육과정으로 기계, 전기전자제어, 신소재분야의 공통트랙으로 이론 30학점, 실험 6학점(16과목, 36학점)을 신설하여 운영하였다. 수강지도를 통한 교차이수권장 학생들의 자율선택기반을 조성하고, 현장적응교육, 캡스톤 디자인 2과목 7학점을 수강하도록 하였다. 학생의 본인주도 학습권을 인정하여 2학년 진학 시 학생본인직접 100% 자기 전공 선택 기회 제공하는 구조조정을 실하고, 타 전공 관련정보 상호교류, 학문간 통합교육, 조직의 유연성확보가 가능하도록 하였다. 교과목(정규/비정규)개편을 통해 개선된 현장 실무 형 내실화 교육의 실시하여 취업률을 향상시켰다. 따라서 창원대학교 신소재공학부는 기계, 전기전자에 관련된 기본소양을 의무적으로 학습하기 때문에 메카트로닉스 분야에서 필요한 신소재공학도를 육성하는 기반을 마련하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.121-125
• /
• 2022

This paper deals with the development of a deep-learning-based robot that recognizes various types of stairs and performs a mission to go up to the target floor. The overall motion sequence of the robot is performed based on the ROS robot operating system, and it is possible to detect the shape of the stairs required to implement the motion sequence through rapid object recognition through YOLOv4 and Cuda acceleration calculations. Using the ROS operating system installed in Jetson Nano, a system was built to support communication between Arduino DUE and OpenCM 9.04 with heterogeneous hardware and to control the movement of the robot by aligning the received sensors and data. In addition, the web server for robot control was manufactured as ROS web server, and flow chart and basic ROS communication were designed to enable control through computer and smartphone through message passing.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1315-1323
• /
• 2023

Rehabilitation assistive devices not only assist the rehabilitation therapy and daily life of the disabled and the elderly, but also assist the labor of their caregivers, so various functions are required to improve their quality of life. In this study, a design method considering its practicality is introduced for an active rehabilitation assistive device that can perform both standing and walking assistance by driving various actuators. For this purpose, the force required to assist standing was calculated using statics with the body segmentation method. Also, the overturning stability of the device was verified for various physical conditions and postures. The actuator in the active rehabilitation assistive device was operated by a patient using a graphical user interface in an embedded computer and a touch panel for easy usage. The detailed design was performed for implementation through the help of 3D-CAD and the finite element analysis, and a prototype was produced. Finally, it was proven that the design goal was satisfied by experimental validation.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.229-237
• /
• 2024

The logistics industry is converging with digital technology and growing into various logistics automation systems. However, inspection and loading/unloading, which are mainly performed in logistics work, depend on human resources, and the workforce is shrinking due to the decline in the productive population due to the low birth rate and aging. Although much research is being conducted on the development of automated logistics systems to solve these problems, there is a lack of research and development on load stacking stability, which has the potential to cause significant accidents. In this study, loading boxes with various sizes and positions of the center of gravity were set up, and a method for stacking that with high stability is presented. The size of the loading box is measured using a depth camera. The loading box's weight and center of gravity are measured and estimated by a developed device with four loadcells. The measurement error is measured through various repeated experiments and is corrected using the least squares method. The robot arm performs load stacking by determining the target position so that the centers of gravity of the loading boxes with unbalanced masses with a random sequence are transported in alignment. All processes were automated, and the results were verified by experimentally confirming load stacking stability.

• Journal of Engineering Education Research
• /
• v.8 no.2
• /
• pp.5-15
• /
• 2005

This paper describes the development of curriculum for the division of Mechatronics in Samcheok University to meet the requirement of Accreditation Board for Engineering Education of Korea(ABEEK). The curriculum of the department of mechatronics in South Korea and overseas university is analysed and then the curriculum is developed considering the synergistic combination of mechanical engineering, electronic engineering, control engineering and computer engineering. And then the geopolitical condition of university is reflected in the curriculum. ABEEK requirements for major of engineering are also reflected. As a result, interdisciplinary curriculum that provides analytic capability and pragmatic qualification to students is developed.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.140-145
• /
• 2021

This paper deals with the development of a deep-learning-based runway cleaning robot using an optical camera. A suitable model to realize real-time object detection was investigated, and the differences between the selected YOLOv3 and other deep learning models were analyzed. In order to check whether the proposed system is applicable to the actual runway, an experiment was conducted by making a prototype of the robot and a runway model. As a result, it was confirmed that the robot was well developed because the detection rate of FOD (Foreign Object Debris) and cracks was high, and the collection of foreign substances was carried out smoothly.

• Journal of Practical Engineering Education
• /
• v.14 no.3
• /
• pp.543-553
• /
• 2022

A collaborative robot(Cobot) is one of the production systems presented in the 4th industrial revolution and are systems that can maximize efficiency by combining the exquisite hand skills of workers and the ability of simple repetitive tasks of robots. Also, research on the development of an efficient interface method between the worker and the robot is continuously progressing along with the solution to the safety problem arising from the sharing of the workspace. In this study, a method for controlling the robot by recognizing the worker's hand signal was presented to enhance the convenience and concentration of the worker, and the safety of the worker was secured by introducing the concept of a safety zone. Various technologies such as robot control, PLC, image processing, machine learning, and ROS were used to implement this. In addition, the roles and interface methods of the proposed technologies were defined and presented for using educational media. Students can build and adjust the educational media system by linking the introduced various technologies. Therefore, there is an excellent advantage in recognizing the necessity of the technology required in the field and inducing in-depth learning about it. In addition, presenting a problem and then seeking a way to solve it on their own can lead to self-directed learning. Through this, students can learn key technologies of the 4th industrial revolution and improve their ability to solve various problems.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.32-38
• /
• 2017

This paper is about the analysis on the vibration characteristic of tooling units on the precision bed in high-speed automatic lathe for precision machining. An automatic lathe operating at about 25,000 RPM is a critical factor in the self-weight stress and deformation of the bed. Especially, the resonance frequency should be grasped in advance to prevent abnormal vibration that may occur during processing. If the wrong bed is used, the resonant frequency can have a fatal influence on the precision machining and increase the defective rate of precision machined parts such as semiconductor parts. In this paper, vibration characteristics were evaluated through static load and resonance frequency analysis of automatic lathe bed. As a result, the maximum stress was 0.14MPa, the maximum deformation amount was $17.9{\mu}m$, and the natural frequency was 364.72Hz. The resonance frequency was calculated as 718Hz, and the stability was confirmed by being in the range of 400Hz or more, which is the processing condition.