Search | Korea Science

Son Maeng-Hyun;Cho Kee-Chae;Jeon Im-Gi;Lim Han Kyu;Park Min-Woo
- Journal of Aquaculture
- /
- v.18 no.4
- /
- pp.280-286
- /
- 2005
Experiments were conducted to examine the differences in ammonia removal rates with the different filter media between sand and zeolite, the expanding rates between $50\%$ and $100\%$, the water temperatures between $15^{\circ}C$ and $25^{\circ}C$, and the ammonia loading rates between 2 mg/L and 5 mg/L in the seawater fluidized bed filters system (FBF). The 2.1 m high FBF (8.3 cm diameter) consisted of the clear acrylic for the upper half and a PVC pipe for the lower half, Sand and zeolite were used as the filter media in sizes of 0.5$\pm$0.1mm. Each biofilter contained 5.4 L of media. The ammonia removal rates of the biofilter were higher at the $25^{\circ}C$ water temperature than those of the biofilter at $15^{\circ}C$ water temperature, and higher at the $50\%$ expanding rate of filter media than those of the biofilter at $100\%$ expanding rate of filter media. Also, the ammonia removal rates of FBF were higher at 5 mg/L ammonia concentration than those of FBF at 2 mg/L ammonia concentration in rearing water. With these better conditions the ammonia removal rates of FBF per day are practically acceptable and ranged ken 80.6 to $210.6g/m^3$.
PDF KSCI

LEE Byung-hun;KIM Jeong-sook;KANG Im-suk
- Journal of Aquaculture
- /
- v.7 no.4
- /
- pp.239-249
- /
- 1994
This study was conducted to elucidate mixing characteristics of the media to dertermine hydraulic model parameters of the three phase fluidized bed for the water quality management of aquaculture. The volume and H/D ratio of the reactor were 1.76 Liter and 10.9, respectively. The experimental results showed that variance $(\sigma^2)$ and dispersion number $(D/{\mu}L)$ were above 0.47 and $0.35\~\infty$, respectively. Therefore, the condition of the reactor was almost ideal complete mixing. The dependence of the overall oxygen-transfer coefficient $(K_{La})$ on each experimental variables through a multple linear regression was given by the following equation ; $$K_{La}\;=\;44.9(D_i/D_c)^{-0.4611}\;A_f^{0.8622}\;C_m^{-0.0746}\;d_p^{-0.4302}$$
PDF

Sung-Il Noh;Ung-Yong Kim;Sung-Gyun Jo;Hyun-Gon Shin
- Journal of the Korea Organic Resources Recycling Association
- /
- v.31 no.4
- /
- pp.5-11
- /
- 2023
This study was conducted to improve energy efficiency and problems such as clumping and fouling in the glue zone that occur in the moisture content range of 40 to 60% when sewage dehydration residue is directly fed into the dryer. The temperature of the hot air is low at 270~300℃, and the paddle-type flotation method and dehydrated residue are applied to the circulated heat storage media to increase the contact area with the hot air, thereby reducing energy recovery and gas emissions. The water content of the dried residue is 2.7. ~7 .5%, the heat of evaporation of moisture was 608.0~690.6 kcal/kg·H₂O, which confirmed an energy saving effect of about 8.8% compared to the heat of evaporation of moisture of 714.5 kcal/kg·H₂O when no heat storage media was used.
https://doi.org/10.17137/korrae.2023.31.4.5 인용 PDF

Gwon, Hyeok-Chae;Na, Dong-Hyeon;Hong, Man-Su;Ha, Tae-Gyun;Park, Jong-Do
- Proceedings of the Korean Vacuum Society Conference
- /
- 2013.02a
- /
- pp.257-257
- /
- 2013
4세대 방사광가속기를 2014년 말 건설 완공 목표로 언듈레이터 시제품 제작하여 테스트 진행과정에 있다. 좁은 틈의 언듈레이터를 지나가는 펄스전자의 진행이 잘되려면 낮은 임피던스가 요구되는데, 전자의 진행을 방해하는 주요 요인으로 진공 표면 거칠기와 산화층 두께에 영향을 많이 받는다. 이러한 영향을 줄이기 위하여 연질의 알루미늄 6063-T6를 재료로 압출공정에 혼합가스를 주입하여 표면 산화를 최소화하였다. 본 실험은 6 m 압출형 진공용기에 압출공정만 거친 것과 유체연마 메디아 종류별, 크기별, 처리시간에 따른 표면개선 효과와 산화층 변화를 알아보았다. 그리고 최종 유체연마 메디아제거 과정에 경면 연마된 표면에 2차 스크레치가 발생하는 원인을 진단하고 이를 방지하기 위한 알코올 주입형 정압시스템을 개발한 것을소개한다.
PDF