• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.212-215
• /
• 2005

The needs of larger screen in mobile device would be increased as the time of ubiquitous and convergence is coming. And, the type of mobile device has been evolved from bar, slide to row. Recently, the study on the multi-display screen which has seamless gap between two display panel has been published, and moreover the System On Chip(SOC) design strategy of core chip has been the most promising Field-Programmable Gate Array(FPGA) technology in the display system. Therefore, in this paper, we proposed the design technique of SOC and evaluated the effectiveness with Very high speed Hardware Description Language(VHDL) Intellectual Property (IP) for the operation of multi display device driver. Also, This IP design would be to allow any kind of user interface in control system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.414-418
• /
• 2007

멀티프로세서 환경에서 OpenMP는 MPI 에 비해 병렬 프로그래밍을 쉽게 할 수 있다는 장점을 가지고 있고, OpenMP는 표준이 없는 병렬 프로그래밍 세계에서 실질적인 표준으로써 인정받고 있다. OPenMP는 대상 플랫폼에 따라 OpenMP 구현을 다르게 해야 하기 때문에 새로운 프로세서가 등장하면 그에 맞는 OpenMP구현을 만들어야 한다. 이 논문에선 다중 프로세서 시스템-온-칩 시스템인 ARM11MPCore 시스템 위에 POSIX 쓰레드에 기반하여 OpenMP 환경을 구축하고 그 성능을 측정한다.

• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.251-254
• /
• 2010

현대사회의 전자와 물리공간의 융합인 유비쿼터스가 진행되고 있다. 이 유비쿼터스 사회가 가능하려면 모든 사물에 컴퓨터 칩인 RFID태그가 부착되어야 한다. RFID는 무선을 통하여 사물의 ID정보를 제공하며, 향후 주변의 상황정보(온도, 습도, 오염정보, 균열정보 등)까지 탐지하여 이를 실시간으로 네트워크에 연결하여 정보를 관리하는 것이다. 앞으로 이 RFID가 가정에서 모든 기기에 부착되어. 시스템화가 된다면 유비쿼터스 가정이 된다. 본 논문에서는 유비쿼터스 사회의 기술적 정의와 자동화 된 지역내 환경제어를 위한 네트웍크를 구현하기 위한 RFID/USN에 대하여 연구하였다.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.2
• /
• pp.39-49
• /
• 2019

Recently, CPU-GPU integrated heterogeneous multicore processors have been widely used for improving the performance of computing systems. Heterogeneous multicore processors integrate CPUs and GPUs on a single chip where CPUs and GPUs share the LLC(Last Level Cache). This causes a serious cache contention problem inside the processor, resulting in significant performance degradation. In this paper, we propose the partitioned LLC architecture to solve the cache contention problem in heterogeneous multicore processors. We analyze the performance impact varying the LLC size of CPUs and GPUs, respectively. According to our simulation results, the bigger the LLC size of the CPU, the CPU performance improves by up to 21%. However, the GPU shows negligible performance difference when the assigned LLC size increases. In other words, the GPU is less likely to lose the performance when the LLC size decreases. Because the performance degradation due to the LLC size reduction in GPU is much smaller than the performance improvement due to the increase of the LLC size of the CPU, the overall performance of heterogeneous multicore processors is expected to be improved by applying partitioned LLC to CPUs and GPUs. In addition, if we develop a memory management technique that can maximize the performance of each core in the future, we can greatly improve the performance of heterogeneous multicore processors.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.76-84
• /
• 2009

This paper proposes a SOC platform which is eligible for education and application SOC design. The platform, fully synthesizable and reconfigurable, includes the OpenRISC embedded processor, some basic peripherals such as GPIO, UART, debug interlace, VGA controller and WISHBONE interconnect. The platform uses a set of development environment such as compiler, assembler, debugger and RTOS that is built for HW/SW system debugging and software development. Designed SOC, IPs and Testbenches are described in the Verilog HDL and verified using commercial logic simulator, GNU SW development tool kits and the FPGA. Finally, a multimedia SOC derived from the SOC platform is implemented to ASIC using the Magnachip cell library based on 0.18um 1-poly 6-metal technology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.36-42
• /
• 2008

40Gb/s CMOS Clock and Data Recovery circuit design for optical serial link is proposed. The circuit generates 8 multiphase clock using LC tank PLL and controls the phase between the clock and the data using the $2{\times}$ oversampling Bang-Bang PD. 40Gb/s input data is 1:4 demultiplexed and recovered to 4 channel 10Gb/s outputs. The design was progressed to separate the analog power and the digital power. The area of the chip is $2.8{\times}2.4mm^2$ for the inductors and the power dissipation is about 200mW. The chip has been fabricated using 0.18um CMOS process. The measured results show that the chip recovers the data up to 9.5Gb/s per channel(Equivalent to serial input rate of up to 38Gb/s).

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.1-7
• /
• 2008

This paper proposes 3.3V input and 1.8V output voltage mode step-down DC-DC buck converter for wireless mobile system which is designed in a standard 0.35$\mu$m CMOS process. The proposed capacitor multiplier method can minimize error amplifier compensation block size by 30%. It allows the compensation block of DC-DC converter be easily integrated on a chip. Also, we improve efficiency to 3% using low power buffer. Measurement result shows that the circuit has less than 1.17% output ripple voltage and maximum 83.9% power efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.148-156
• /
• 2001

This paper proposed embedded application-specific microprocessor(YS-RDSP) whose structure has an additional DSP processor on chip. The YS-RDSP can execute maximum four instructions in parallel. To make program size shorter, 16-bit and 32-bit instruction lengths are supported in YS-RDSP. The YS-RDSP provides programmability. controllability, DSP processing ability, and includes eight-kilobyte on-chip ROM and eight-kilobyte RAM. System controller on the chip gives three power-down modes for low-power operation, and SLEEP instruction changes operation statue of CPU core and peripherals. YS-RDSP processor was implemented with Verilog HDL on top-down methodology, and it was improved and verified by cycle-based simulator written in C-language. The verified model was synthesized with 0.7um, 3.3V CMOS standard cell library, and the layout size was 10.7mm78.4mm which was implemented by using automatic P&R software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.482-489
• /
• 2010

In this paper we have proposed a new architecture of DQ-IRM(Double-Quadrature Image Rejection Mixer) for image rejection in the low-IF receiver. It consist of a frequency-tunable RF PPF(Poly Phase Filter) and the quadrature mixers. The conventional DQ-IRM generates the quadrature RF signals for the RF wide band at once. But the proposed DQ-IRM with the frequency-tuable RF PPF generates the quadrature RF signals for the narrow band of 2~3 channels bandwidth, which is partitioned from the RF wide band. We designed the CMOS RF tuner for T-DMB(Terrestrial Digital Multimedia Broadcasting) with the proposed 3rd DQ-IRM using a 0.18um CMOS technology and verified the performances of the designed receiver such as the image rejection ratio, the noise figure and the power consumption. The overall NF of the RF tuner is about 1.26 dB and the image reject ratio is about 51 dB. The power consumption is 55.8 mW at 1.8 V supply voltage. The chip area is $3.0{\times}2.5mm^2$.