• Journal of Korea Multimedia Society
• /
• v.14 no.10
• /
• pp.1287-1302
• /
• 2011

Clustering protocol that is used in wireless sensor network is an efficient method that extends the lifetime of the network. However, when this method is applied to an environment in which collected data of the sensor node easily overlap, sensor nodes unnecessarily consumes energy. In the case of clustering technique that uses a threshold, the lifetime of the network is extended but the degree of accuracy of collected data is low. Therefore it is hard to trust the data and improvement is needed. In addition, it is hard for the clustering protocol that uses multi-hop transmission to normally collect data because the selection of a cluster head node occurs at random and therefore the link of nodes is often disconnected. Accordingly this paper suggested a cluster-formation algorithm that reduces unnecessary energy consumption and that works with an alleviated link disconnection. According to the result of performance analysis, the suggested method lets the nodes consume less energy than the existing clustering method and the transmission efficiency is increased and the entire lifetime is prolonged by about 30%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.609-616
• /
• 2023

In a wireless network environment, since sensors are not always connected to power, the life of a battery, which is an energy source supplied to sensors, is limited. Therefore, various studies have been conducted to extend the network life, and a layer-based routing protocol, LEACH(: Low-energy Adaptive Clustering Hierarchy), has emerged for efficient energy use. However, the LEACH protocol, which transmits fused data directly to the sink node, has a limitation in that it consumes as much energy as the square of the transmission distance when transmitting data. To improve these limitations, this paper proposes an algorithm that can minimize the transmission distance with multi-hop transmission where cluster heads are chained between cluster heads through relative distance calculation from sink nodes in every round.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3A
• /
• pp.287-295
• /
• 2010

In wireless sensor networks(WSNs), the studies that support sink mobility without global position information exploit a Backbone-based Virtual Infrastructure (BVI) which considers one-hop clusters and a backbone-based tree. Since the clusters of a sink and a source node are connected via flooding into the infrastructure, it causes high routing cost. Although the network could reduce the number of clusters via multi-level clusters, if the source nodes exist at nearest clusters from the cluster attached by the sink and they are in different branches of the tree, the data should be delivered via detour paths on the tree. Therefore, to reduce the number of clusters, we propose a novel multi-hop cluster based communication protocol supporting sink mobility without global position information. We exploit a rendezvous cluster head for sink location service and data dissemination but the proposed protocol effectively reduces data detour via comparing cluster hops from the source. Simulation shows that the proposed protocol is superior to the existing protocols in terms of the data delivery hop counts.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1201-1206
• /
• 2007

In this paper, we propose an algorithm that improve network lifetime by adjusting cluster size according to location information of sensor node in wireless sensor network (WSN) using clustering algorithm. The collected sensing information by sensor nodes in each cluster are transferred to sink node using inter-cluster communications method. Cluster head (CH) that located nearby sink node spend much more energy than those of far from sink node, because nearer CH forwards more data, so network lifetime has a tendency to decrease. Proposed algorithm minimizes energy consumption in adjacent cluster to sink node by decreasing cluster size, and improve CH lifetime by distributing transmission paths. As a result of mathematical analysis, the proposed algorithm shows longer network lifetime in WSN.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.91-105
• /
• 2010

A wireless sensor network communication technique has been broadly studied with continuous advances in ubiquitous computing environment. Especially, because the resource of the sensor node is limited, it is important to reduce the communication energy by using an energy-efficient routing protocol. The existing cluster-based routing protocols have a problem that they cannot select a cluster head efficiently by randomly choosing a head. In addition, because the existing cluster-based routing protocols do not support the large scale of network, they cannot be used for various applications. To solve the above problems, we, in this paper, propose a new cluster-based routing protocol using representative paths. The proposed protocol constructs an efficient cluster with distributed cluster heads by creating representative paths based on hop count. In addition, a new routing protocol supports multi-hop routing for data communication between a cluster member node and a cluster head as well as between cluster heads. Finally, we show that our protocol outperforms LEACH and Multihop-LEACH in terms of reliability and scalability.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.364-370
• /
• 2008

In this paper, we proposed new sensor network architecture with autonomous robots based on beacon mode and implemented real time monitoring system in real test-bed environment. The proposed scheme offers beacon based real-time scheduling for reliable association process with parent nodes and dynamically assigns network address by using NAA (Next Address Assignment) mechanism. For the large scale multi-sensor processing, our real-time monitoring system accomplished the intelligent database processing, which can generate not only the alert messages to the civilians but also process various sensing data such as fire, air, temperature and etc. Moreover, we also developed mobile robot which can support network mobility. Though the performance evaluation by using real test-bed system, we illustrate that our proposed system demonstrates promising performance for emergence monitoring systems.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.29-36
• /
• 2013

In wireless sensor networks, energy is the most important consideration because the lifetime of the sensor node is limited by battery. Most of the existing energy efficient routing protocols use the minimum energy path to minimize energy consumption, which causes an unbalanced distribution of residual energy among nodes. As a result, the power of nodes on energy efficient paths is quickly depletes resulting in inactive. To solve these problems, a method to equalize the energy consumption of the nodes has been proposed, but do not consider the link error rate in the wireless environment. In this paper, we propose a uniform energy consumption of cluster-based multi-hop routing mechanism considering the residual energy and the link error rate. This mechanism reduces energy consumption caused by unnecessary retransmissions and distributes traffic evenly over the network because considering the link error rate. The simulation results compared to other mechanisms, the proposed mechanism is energy-efficient by reducing the number of retransmissions and activation time of all nodes involved in the network has been extended by using the energy balanced path.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.33-39
• /
• 2016

With recent advances in sensor technology, CMOS-based semiconductor devices and networking protocol, the areas for application of wireless sensor networks greatly expanded and diversified. Such diversification of uses for wireless sensor networks creates a multitude of beneficial possibilities for several industries. In the application of wireless sensor networks for monitoring systems' data transmission process from the sensor node to the sink node, transmission through multi-hop paths have been used. Also mobile sink techniques have been applied. However, high energy costs, unbalanced energy consumption of nodes and time gaps between the measured data values and the actual value have created a need for advancement. Therefore, this thesis proposes a new model which alleviates these problems. To reduce the communication costs due to frequent data exchange, a State Prediction Model has been developed to predict the situation of the peripheral node using a geographic autocorrelation of sensor nodes constituting the wireless sensor networks. Also, a Risk Analysis Model has developed to quickly alert the monitoring system of any fatal abnormalities when they occur. Simulation results have shown, in the case of applying the State Prediction Model, errors were smaller than otherwise. When the Risk Analysis Model is applied, the data transfer latency was reduced. The results of this study are expected to be utilized in any efficient communication method for wireless sensor network monitoring systems where all nodes are able to identify their geographic location.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.419-429
• /
• 2013

The Wireless sensor network(WSN) consisting of a large number of sensors aims to gather data in a variety of environments. The sensor nodes operate on battery of limited power. so, To extend network life time is major goals of research in the WSN. In this paper, we state the key point of a energy consumption with minimum&load balancing. The proposed protocol guarantee balance of number of cluster member nodes using the node memory threshold and optimization of distribution of cluster head using the optimized clustering method. The results show that the proposed protocol could support the load balancing and high energy efficiency by distributing the clusters with a reasonable number of member nodes. The simulation results show that our schme ensure longer life time in WSN as compare with existing schemes such as LEACH and CBLM.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.879-884
• /
• 2024

Wireless sensor network technology is becoming increasingly important with the advancement of the Fourth Industrial Revolution. Consequently, various protocols such as LEACH, PEGASIS, and EEACP have been developed in an attempt to increase energy efficiency. However, the EEACP protocol still has room for improvement in terms of energy consumption during transmission. Particularly, inefficient paths associated with data reception settings may compromise the network's survivability. The proposed A-EEACP protocol optimizes data transmission direction around the sink node to reduce energy consumption and enhance the network's survivability.