• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.369-379
• /
• 2011

During the routing process between nodes on the CR(Cognitive Radio) network conducting for efficient use of limited frequency resources, spectrum handover process due to the appearance of the PU occupies most of the routing latency, and also decreases the reliability of the path. In this paper, a cooperative routing protocol in a multi-channel environment is proposed. The source node broadcasts a message with available channel lists and probability of PU appearance during its route guidance. The intermediate nodes re-transmit the message, received from the source node, and update and maintain the information, status table of the path. The destination node determines the optimal path and sends a reply message to the selected path after it receives the messages from the intermediate nodes. The average probability of the PU appearance and the average time of the PU appearance are updated while transferring data. During data transmission the channel with the lowest probability of appearance of the PU is selected dynamically and if a PU appears on the current channel partial repairment is performed. It is examined that reliability of the selected path considerably is improved and the routing cost is reduced significantly compared to traditional routing methods.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.29-36
• /
• 2013

In wireless sensor networks, energy is the most important consideration because the lifetime of the sensor node is limited by battery. Most of the existing energy efficient routing protocols use the minimum energy path to minimize energy consumption, which causes an unbalanced distribution of residual energy among nodes. As a result, the power of nodes on energy efficient paths is quickly depletes resulting in inactive. To solve these problems, a method to equalize the energy consumption of the nodes has been proposed, but do not consider the link error rate in the wireless environment. In this paper, we propose a uniform energy consumption of cluster-based multi-hop routing mechanism considering the residual energy and the link error rate. This mechanism reduces energy consumption caused by unnecessary retransmissions and distributes traffic evenly over the network because considering the link error rate. The simulation results compared to other mechanisms, the proposed mechanism is energy-efficient by reducing the number of retransmissions and activation time of all nodes involved in the network has been extended by using the energy balanced path.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.1
• /
• pp.11-14
• /
• 2015

WSN (Wireless Sensor Network) based on low-power is one of the core technologies in the ubiquitous society. In this paper, we present a border surveillance and control system in WSN environment. The system consists of static sensor node, mobile sensor node, static gateway, mobile gateway, server and mobile application. Mobile applications are divided into user mode and manager mode. So users monitor border surveillance through mobile phone and get information of border network environment without time and space constraints. In manager mode, for the flexible operation of nodes, manager can update to the software remotely and adjust the position of the mobile node. And also we implement a suitable multi-hop routing protocol for scalable low-power sensor nodes and confirm that the system operates well in WSN environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.37-48
• /
• 2014

Wireless mesh networks have emerged as a key technology in environment that needs wireless multi-hop communication without infrastructure and IEEE 802.11s mesh network standard have currently been established. One of big differences between this standard and the legacy IEEE 802.11 is that MCCA MAC is included to support QoS. MCCA supports bandwidth reservations between neighbors, so it can satisfy the QoS of bandwidth guarantee. However, MCCA has dis-advantages as follow; 1) it can not guarantee end-to-end bandwidth, 2) in multi-interface multi-channel wireless environments, the IEEE 802.11s does not provide a bandwidth reservation protocol and a wireless channel assignment etc. In this paper, we have proposed MIMC R-HWMP, which expands R-HWMP that was proposed in our previous work[3], to support multi-interface multi-channel. By simulation, we showed end-to-end bandwidth guarantee and the increase in the available bandwidth in multi-interface multi-channel wireless mesh networks.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.222-230
• /
• 2009

A sensor network is an important element of the ubiquitous and it consists of sensor fields that contain sensor nodes and sink nodes that collect data from sensor nodes. Since each sensor node has limited resources, one of the important issues covered in the past sensor network studies has been maximizing the usage of limited energy to extend network lifetime. However, most studies have only considered fixed sink nodes, which created various problems for cases with multiple mobile sink nodes. Accordingly, while maintaining routes to mobile sink nodes, this study aims to deploy the hybrid communication mode that combines single and multi-hop modes for intra-cluster and inter-cluster transmission to resolve the problem of failed data transmission to mobile sink nodes caused by disconnected routes. Furthermore, a 2-level hierarchical routing protocol was used to reduce the number of sensor nodes participating in data transmission, and cross-shape trajectory forwarding was employed in packet transmission to provide an efficient data dissemination method.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.427-434
• /
• 2014

The Multihop Routing of vehicle communication environment is difficult to maintain due to heavy fluctuation of network topology and routing channel according to the movement of the vehicle, road property, vehicle distribution. We implemented GeoNetworking on the basis of ETSI(European Telecommunication Standard Institute) to maintain the vehicle safety service. GeoNetworking has its own way that delivers the data through the Unicast and Broadcast. In this paper, we compared performance index such as packet delivery ratio, end-to-end delay about GeoNetworking using the QualNet Network Simulator. Previous research assessed performance of GeoUnicast. This research has been additionally performed about GeoBroadcast, and we progressed algorithm performance through the comparison of CBF(Contention based Forwarding) of GeoUnicast with Greedy forwarding of GeoBroadcast.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.118-126
• /
• 2007

An ad hoc network is a system of wireless mobile nodes that dynamically self-organize in arbitrary and temporary network topologies allowing people and devices to internetwork without any preexisting communication infrastructure. Although ad hoc network is attractive solution, there are still some major flaws that prevent commercial growth. Security is one of these main barriers; ad hoc networks are known to be particularly vulnerable to security attack. It is difficult to establish a centralized key distribution center and a trusted certification authority to provide cryptographic keys and digital certificates to nodes. To prevent attacks in ad hoc routing protocols, many algorithms have been used. In this paper, we have depicted a secure framework for multipath routing in wireless multihop network, which is comprehensive solution for secure data forwarding in wireless multihop networks. With the simulation results, the proposed scheme is compared with existing source routing scheme.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.105-111
• /
• 2009

The study aims to propose the intelligent clustering technique that calculates the distance by improving the problems of multi-hop clustering technique for inter-vehicular secure communications. After calculating the distance between vehicles with no connection for rapid transit and clustering it, the connection between nodes is created through a set distance vale. Header is selected by the distance value between nodes that become the identical members, and the information within a group is transmitted to the member nodes. After selecting the header, when the header is separated due to its mobility, the urgent situation may occur. At this time, the information transfer is prepared to select the new cluster header and transmit it through using the intelligent cluster provided from node by the execution of programs included in packet. The study proposes the cluster technique of the intelligent distance estimation for the mobile Ad-hoc network that calculates the cluster with the Store-Compute-Forward method that adds computing ability to the existing Store-and-Forward routing scheme. The cluster technique of intelligent distance estimation for the mobile Ad-hoc network suggested in the study is the active and intelligent multi-hop cluster routing protocol to make secure communications.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1446-1459
• /
• 2008

In an infrastructure-based wireless network, an access point is used for all communications among mobile devices. However, when a mobile device moves into a dead Bone, a connectivity disruption between the mobile device and the access point occurs. Such connectivity disruption consequently leads to another connectivity disruption between the mobile device moving toward the dead zone and other wireless-enabled devices located within the area of the infrastructure-based wireless network. To cope with the connectivity disruption in the infrastructure-based wireless network the ad hoc network that dynamically forms a network without any preexisting communication infrastructure needs to be set up to provide seamless connections among mobile devices. In this paper, we propose the DNSQ-MAC (Dynamic Network State aware QoS-Medium Access Control) technique that meets the deadlines of MAC frames forwarded over hop-by-hop multipaths and guarantees the QoS performance of an ad hoc-based wireless network. Mobile devices incorporating the DNSQ-MAC technique are capable of adjusting to the new dynamic network status in order to enhance the QoS performance in the ad hoc-based wireless network. A case study which exploits the Qualnet simulator shows that the proposed DNSQ-MAC technique can guarantee the deadlines of MAC frames forwarded over hop-by-hop multipaths and enhance the QoS performance of various routing protocols and packet schedulers running on the network layer above the MAC layer.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.64-72
• /
• 2009

Previous research on sensor networks mainly focused on efficient transmission of data from sensors to fixed sink nodes. Recently there has been active research on mobile sink nodes, but the re-search of an environment where both fixed sink nodes and mobile sinks are present at the same time is rather scarce. This paper proposes a technique for context gathering by mobile devices with the sink functionality added through fixed sinks under a previously built, cluster based multi hop sensor network environment. To this end, clustering of mobile devices were done based on the fixed sinks of a previously built sensor network, and by using appropriate fixed sinks, context gathering was made possible. By mathematical comparison with TTDD routing protocol, which was proposed for mobile sinks, it was conformed that performance increases in energy with the number of mobile sinks, and with the number of movements by mobile devices.