• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.37-42
• /
• 2007

This paper reconsiders established power conservation models for ubiquitous sensor networks that use relay nodes instead of direct communication and proposes novel network power consumption model with consideration of the channel level and radio chip level simultaneously. We estimate the effect of minimum hop-count policy in terms of network power consumption through simulation of various situations for low power RF module CC2420. It is observed that maximum RF power and minimum hop-count results in lower energy consumption relatively. Also, in total network energy consumption, which is included re-transmission, minimum hop count policy presents decrease by 33.1% of energy consumption in compare with the conventional model.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.323-328
• /
• 2007

Communication systems beyond 3G should provide more than 100 Mbps for wireless access. In addition to smart antennas, wireless multi-hop networks are proposed to increase the cell size and throughput. For example, Zigbee technology is expected to provide low cost and low power connectivity and can be implemented in wireless mesh networks larger than is possible with Bluetooth. Also, home embedded system using wireless mesh network is one of the key market areas for Zigbee applications. If the line-of-sight path is shadowed by home obstacles, a direct connection between the access point (AP) and the node is not possible at high frequencies. Therefore, by using multi-hop relay scheme the end node can be reached to AP. In this paper, the relaying of data between the AP and the end node is investigated and the throughput and PER(Packet Error Rate) are evaluated in multi-hop wireless mesh networks by using DSSS/BPSK system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.116-123
• /
• 2013

In mobile healthcare applications, the reliable transmission of the bio-data is very important. In this article, we present a reliable bio-data transmission technique for mobile healthcare monitoring service at 6LoWPAN multi-hop wireless networks. In particular, we expand IEEE 11073-20601 protocol, and propose the reliable path construction for 6LoWPAN aimed to reliably provide mobile healthcare service over wireless sensor network, using IPv6 network. 6LoWPAN is recognized possibility because it is agree with sensor network by raising Adaptation layer on the MAC layer to transmit IPv6 packets. In this article proposed minimize the algorithm complexity and reliability routing protocol because the 6LoWPAN devices are suitable for low cost, small size and battery that can be used to health care system environment. And detailed procedures and algorithms are presented. We the proposed method to prove the superiority of using NS-3 for compareing with AODV protocol.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1593-1608
• /
• 2009

If a certain relay node in multi-hop wireless networks might become a malicious node that does not cooperate with other nodes or a selfish node, network throughput will be dramatically decreased. Most of existing ad hoc routing protocols assuming that the nodes will fully cooperate with other nodes do not resolve the problem of network performance degradation due to malicious and selfish nodes. This paper presents the CARE (Cooperative Ad hoc routing protocol based REputation) scheme incorporating the reputation management that can achieve a multi-hop wireless network with high throughput performance. The proposed scheme provides the horizontal cross-layer approach which can identify misbehaving malicious, selfish nodes dropped out of the hop-by-hop based packet processing in the network and then set up an optimal packet routing path that will detour misbehaving nodes. And the vertical cross-layer approach contained in the CARE scheme attempts to improve the quality of routing paths by exploiting the quality of link information received from the MAC layer. Besides, it provides high TCP throughput by exploiting the reputation values of nodes acquired from the network layer into the transport layer. A case study on experiments and simulations shows that the CARE scheme incorporating vertical and horizontal cross-layer approaches yields better performance in terms of the low rate of packet loss, fast average packet delivery time, and high TCP throughput between end-to-end nodes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.471-476
• /
• 2015

In this paper, we propose an energy efficient hybrid MAC protocol for multi-hop wireless sensor networks. The proposed MAC protocol used a hybrid mechanism, in which contention-based MAC protocol and contention free MAC protocol are combined. The sensor nodes located far from the sink node usually send few data packet since they try to send measured data by themselves. So contention-based MAC protocol is useful among them. But other nodes located near sink node usually have lots of data packets since they plays as a relay node. Contention-based MAC protocol among them is not suitable. Using contention-based MAC protocol in heavy data traffic environment, packet collisions and transmission delay may increase. In this paper, slot assignment between sender nodes by sink node is used. The proposed mechanism is efficient in energy and latency. Results showed that our MAC protocol outperformed other protocol in terms of data packet delivery delay and energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.688-696
• /
• 2013

In wireless sensor networks, real-time applications have to ensure the timely delivery of real-time data. Recently, OMLRP (On-demand Multi-hop Look-ahead Routing Protocol) has been proposed to improve the timeliness of wireless sensor networks. The protocol needs initialization time to establish multi-hop information based routing path because it performs incremental look-ahead of the information. Consequently, the protocol deteriorates DDSR (Deadline Delivery Success Ratio) as an event moves because it takes little consideration of event mobility. In this paper, we proposed a Real-time Routing for Events Mobility (RREM) which exploits a data redirection in order to improve the DDSR of moving events. Instead of recollecting muti-hop look-ahead information, the RREM redirects the data to a sensor node holding the information collected in a previous round. We verify the timeliness and energy efficiency of RREM using various MatLab simulations.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.408-414
• /
• 2007

Research advances in the areas of micro-sensor device and wireless network technology, has made it possible to develop energy efficient and low cost wireless sensor nodes. In this paper, the forward error control (FEC) scheme for lower power consumption and excellent BER(Bit Error Rate) performance during transmission propose in multi-hop wireless sensor network based on FSK modem. The FEC technique uses extra processing power related to encoding and decoding, it is need complex functions to be built into the sensor node. The probability of receiving a correct bit and codeword for relaying a frame over h nodes to the sink node is calculated as a function of channel parameter, number of hops, number of bits transmitted and the distance between the different nodes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.470-475
• /
• 2008

6LoWPAN 센서 노드의 이동성을 지원하기 위해 기존의 Mobile IPv6 (MIPv6)와 같은 프로토콜을 활용하는 것은 저전력에 제한적 사양의 하드웨어로 구성된 6LoWPAN 센서 노드에서 구동되는 것이 현실적으로 불가능하다. 따라서 Mobile Access Gateway (MAG)가 6LoWPAN 센서 노드의 이동시 발생하는 바인딩 시그널링을 대신 처리해주는 Proxy Mobile IPv6 (PMIPv6) 프로토콜을 6LoWPAN에 적용하면 효율적으로 이동성을 지원할 수 있다. 하지만 Proxy Mobile IPv6는 6LoWPAN 이동 센서 노드와 1홉으로 연결되는 경우에 6LoWPAN 이동 센서 노드의 이동을 인지하고 Proxy Binding Update(PBU)를 하게 되지만, 6LoWPAN 센서 네트워크와 같이 멀티 홉으로 구성되는 네트워크에는 Proxy Mobile IPv6를 바로 적용할 수 없다. 따라서 본 논문에서는 기존의 1홉 단위로 연결된 6LoWPAN 이동 센서 노드의 이동성을 지원하는 Proxy Mobile IPv6 프로토콜을 멀티를 환경의 6LoWPAN 센서 네트워크에 적용하기 위한 방법을 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.578-580
• /
• 2009

Wireless Sensor Networks(WSNs) has been used for various applications. It is optimized to low power operation than various function and transmission reliability because of limited power by batteries. but it is necessary to guarantee of reliability for using exact data for more diversity purpose. In WSNs environment composed by multi-hop, it is guarantee to end-to-end transmission reliability based hop-by-hop reliability. however, IEEE 802.15.4 standard is not consider link-layer reliability. in this paper, we propose energy efficient Reliable Link-layer Protocol for Wireless Sensor Networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1120-1127
• /
• 2007

In this paper, we propose a generalized processor sharing - dynamic resource allocation (GPS-DRA) scheme which allocates the required amount of resources to each hop dynamically in cellular-based multi-hop systems. In the hybrid-distributed system considered in this paper, a central controller such as a base station (BS) should allocate resources properly to each hop. However, due to changing channel condition with time, it is difficult to allocate as much amount of resources as each hop needs for transmission. GPS-DRA scheme allocates the required amount of resources dynamically to each hop based on the amount of resources used in previous frames by each hop. The amount of control overhead generated by GPS-DRA scheme can be very small because a central controller doesn't need to collect all link information for resource allocation. Our simulation results show that channel utilization increased about 16% and cell capacity increased about 65% compared to those of fixed resource allocation (FRA) scheme.