• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.254-259
• /
• 2008

Mesh WLANs, which consist of wireless mesh routers connecting each other in a mesh topology and self-operate after their autoconfiguration, have several advantages in convenience, swiftness and flexibility of deployment and operation over existing WLANs the expansions of which are done by connecting the APs with wires. However, many technical issues still remain to be solved. Among them, network performance degradations due to the interference between the adjacent hops in multi-hop mesh WLANs, and the reusability of the existing wireless network protocols are critical problems to be answered. This work evaluates the VoIP support performance of IEEE 802.11a/g-based mesh WLANs with multiple wireless interfaces with simulations. The results show that there exit an unfairness in VoIP packet delay performances among mobile routers located at different hops, and that although the capacity of the admitted calls can be increased by increasing the size of voice packet payload it is far less than the expected one. This suggests that the existing 802.11 MAC protocols have their limitation when applied in mesh networks and their enhancement or even a newer one nay be required.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.499-502
• /
• 2018

We propose a wireless-powered multihop transmission scheme using inter-node cooperation in a linear network topology. The proposed protocol determines the energy transfer time for each node to make the lifetime of the each node be equal in order to maximize the lifetime of the multihop path. To make the lifetime of each node the same, we apply the flocking algorithm which imitates the behavior of a bird flock flying at the same velocity, so that the lifetime of the nodes is averaged locally. Simulation results show that the proposed algorithm can maximize the lifetime of the multihop path by making all nodes have the same lifetime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2035-2046
• /
• 2015

Recently, researches on resource allocation algorithms operating in a distributed way are widely conducted because of the increasing number of network nodes and the rapidly changing the network environment. In this paper, we propose Multi-Hop DESYNC(MH DESYNC), that is bio-inspired TDMA-based resource allocation scheme operating in a distributed manner in multi-hop networks. In this paper, we define a frame structure for the proposed MH DESYNC algorithm and firing message structure which is a reference for resource allocation and propose the related operating procedures. We show that MH DSYNC can resolve the hidden-node problem effectively and verify that each node shares resources fairly among its neighboring nodes. Through simulation evaluations, it is shown that MH DESYNC algorithm works well in a multi-hop networks. Furthermore, results show that MH DESYNC algorithm achieves better performance than CSMA/CA algorithm in terms of throughput.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.262-265
• /
• 2010

멀티미디어 스트리밍은 인터넷에서 이미 가장 인기있는 서비스가 되었다. 멀티미디어 스트리밍 서비스를 제공하기 위해서는 충분한 대역폭과 딜레이가 유지되어야 한다. 기존의 무선 멀티홉 네트워크는 이러한 요구사항을 만족하기 어렵다. 본 논문에서는 멀티미디어 스트리밍을 보다 좋은 품질로 서비스하기 위해 802.11e를 사용한 Hop Based Priority 테크닉을 제안한다. HBP 테크닉은 패킷이 경로를 따라 이동할때 한홉이 지날때마다 우선순위를 증가시킨다. 그럼으로써 먼저 보낸 패킷과 나중에 보낸 패킷간의 경쟁을 최소화 시키고 먼저 보낸 패킷이 채널을 잡을수 있도록 한다. 이를 모델링을 통해 검증하여 약 43%의 성능 개선 효과가 있음을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.77-80
• /
• 2017

One of the fundamental limits of Bluetooth Low Energy(BLE) is that the data transmission is available via singlehop connection. In this research, we suggested the stable multihop transmission method to overcome this limitation. In multihop connection situation, multiple singlehop connection should be made and disconnected dynamically. Therefore, we stored the data within the GATT layer and tried to send it dynamically. We divided whole process as 4 states, and let each nodes transfers around each states to make data connection safely. Also, we set the transfer policy between each states during the transmission to make a robust system. From the experiment in real-time environment, we proved that our method showed high rate of packet delivery in a multihop network, which consists of more than 3 nodes.

• Convergence Security Journal
• /
• v.15 no.3_1
• /
• pp.75-82
• /
• 2015

Recently, lot of researches on multi-level protocol have been done to balance the sensor node energy consumption of WSN and to improve the node efficiency to extend the life of the entire network. Especially in multi-hop protocol, a variety of models have been studied to improve energy efficiency and apply it in real system. In multi-hop protocol, we assume that energy consumption can be adjusted based on the distance between the sensor nodes. However, according to the physical property of the actual WSN, it's hard to establish this. In this paper, we propose low-power sub-cluster protocol to improve the energy efficiency based on the spread of distance. Compared with the previous protocols, the proposed protocol is energy efficient and can be effectively used in the wireless sensing network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.931-937
• /
• 2015

Distributed relay scheme for wireless ad hoc multi-hop multicast network composed of low-power and low-complexity wireless devices with high density is proposed. The proposed relay scheme is shown to be better than flooding, which is the distributed relay scheme applied to ZigBee, in the outage probability and the multicast transmission rate by simulations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.21-26
• /
• 2012

Intra-session network coding has been proposed to improve throughput by simplifying scheduling of multi-hop wireless network and efficiency of packet transmission. Multi-rate transmission has been used in multihop wireless networks. An opportunistic routing with multirate shows throughput improvement compared with single rate. In this paper, we propose a method of throughput improvement in multi-hop wireless network by using multi-rate and intra-session network coding. We suggest a method to select an local optimal transmission rate at each node. The maximum throughput is evaluated by using linear programming (LP). To solve the LP, we use MATLAB and lp_solve IDE program. The performance evaluation results show that end-to-end throughput is improved by using multirate and intra-session network coding can achieve better throughput than opportunistic routing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.139-145
• /
• 2015

This paper proposes to increase the node energy effienciecy, which rapidly drops during the transmission of LEACH (Low Energy Adaptive Clustering Hierachy), using the method of DL-LEACH (Dual-hop Layered LEACH). By introducing dual-hop method in the data transmission, the proposed single-hop method for short-range transmission and multi-hop transmission method between the cluster heads for remote transmission was introduce. By introducing a partial multi-hop method in the data transmission, a single-hop method for short range transmission method between the cluster heads for remote transmission was introduces. In the proposed DL-LEACH, the energy consumption of cluster head for remote transmission reduces and increases the energy efficiency of sensor node by reducing the transmission distance and simplifying the transmission routine for short-range transmission. As compared the general LEACH, it was adapted to a wider sensor field.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.657-658
• /
• 2015

In an wireless sensor network, energy efficient routing protocol is important for multi-hop transmission because senor nodes are powered by battery. In multi-hop transmission, specifice nodes are used and the battery power becomes low, it induce the asymetric remaining power among the nodes and makes the network lifetime reduced. In this paper, we propose a power-aware routing protocol which determines the routing path considering the remaining power of the nodes. Simulation results shows that the proposed routing scheme minimize the transmission delay and increase the network lifetime.