• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.3
• /
• pp.55-70
• /
• 2016

The most critical research issue in MANET environment is on supporting reliable communication between various devices. Various Multi-Hop Routing Protocol studies have proceeded. However, some problems you might have found when you use the existing link state routing technique are that it increases Control Message Overhead and it is unstable when node moves in CR circumstance which has transformation of using channel and MIMC circumstance which uses a number of interfaces. This essay offers a technique which is based on On-Demand Hello and the other technique which used Broadcast Interface of optimization as a solution to decrease Control Message Overhead. Also it proposes Quick Route Restoration technique which is utilized by GPS and MPR Selection technique which consider mobility as a solution of stable communication when node moves. Those offered Routing Protocol and OPNET based simulator result will be expected to be an excellent comparison in related research fields.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.16-23
• /
• 2009

This paper investigates how many optimal routes can be established in terms of a given wireless mesh routing metric. Although many of routing metrics have been devised to precisely derive the wireless link quality in mesh, most (if not all) metrics have not been evaluated their optimality along with routing protocols. We consider stateof-the-art routing metrics and a widely accepted routing protocol in order to observe the optimality of established routes varying the number of source nodes. Also, we propose a unidirectional routing to deal with possible link asymmetry feature in wireless links. Through comparative simulation evaluations, we show that the portion of optimally established routes becomes less as the network traffic load increases, regardless of employed metrics, network topologies, and routing protocols.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1629-1639
• /
• 2009

This paper describes the environmental monitoring system for supporting comfortable subways based on USN. Our development system includes the sensor field based on integrated sensor, monitoring system for supporting the local and remote monitoring and middle-ware performs the collecting, analyzing, and storing the data. In this paper, we installed the temperature, humidity, micro-dust sensor and water-level sensor for supporting the rail-roads and make up the integrated sensor enables to reuse the analog device from 4~20mA output with connection of wireless sensor device. Middleware includes the modules of collecting, analysis, and storing the data and monitoring system supports the local for administrator and remote monitoring for citizen services based on web. The middleware and monitoring in this paper is comprised of some components can reuse and support the change of application and sensors. Our development system supports the mobility of sensor devices and distributes system. Data collection and management function supported by middleware will use assessment.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.227-234
• /
• 2008

The development of wireless network technology allows high data rate seamless communication irrespective of the place and time in various emerging mobile service environment. Unlike wired networks, however, wireless networks utilize expensive limited bandwidth. MBS(Multicast Broadcast Service), which is supported by mobile WiMAX system based on IEEE802.16e, overcomes this problem using a shared downlink channel for efficiently supporting a number of users. However. the coverage and throughput of the system are significantly affected by the channel condition. In this paper we propose on MBS system employing Mobile Multi-Hop Relay(MMR) and adaptive modulation and coding(AMC) scheme. The result of NS-2 computer simulation shows that the throughput and transmission time are substantially improved by the proposed approach compared to the existing MBS system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.29-34
• /
• 2008

In this paper, we proposed a system protocol for detecting injurious insect to support energy saving transmission in wireless bio sensor networks. The main ideas and features of the system are as follows. First, the route establishment method which is based on the energy efficiency and stability by using time-division tree structure. Second, multi-hop direction-based data gatering structure. In this structure, the selected fading method is used to transmit packet via the established tree structure for supporting power saving and route lifetime efficiently. Finally, we can get the node power saving and reduce transmission delay, thus network lifetime and efficiency are improved. The performance evaluation of the proposed protocol is via OPNET(Optimized Network Engineering Tool).

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.10-17
• /
• 2010

Sensor nodes used in Geosensor network are resource limited and power constrained. So it is necessary to research on routing protocols to gather data by using energy efficiently. Wireless sensor networks collect data gathered from sensor nodes by transfering it to the sink using multihop. However, it has two problems. First, the existing works require unnecessary data transmission for choosing a proper parent node to transfer data. Secondly, they have a large number of data transmission because each sensor node has a different path. To solves the problems, we, in this paper, propose a designated path based data aggregation scheme for efficient energy management in WSNs. The proposed scheme can reduce unnecessary data transmission by pre-determining a set of paths and can enable all the sensor nodes to participate in gathering data by running them in round-robin fashion. We show from performance analysis that the proposed scheme is more energy efficient than the existing directed diffusion(DD) and the hierarchical data aggregation(HDA).

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.56-66
• /
• 2013

In MANET, the frequent movement of nodes causes the dynamic network topology changes. Therefore, it is required that the routing protocol should be very stable to effectively respond the changes of the network changes. Moreover, the existing cluster-based routing protocol, that is the hybrid approach, has routing delay due to the re-electing of the cluster header. In addition, the routing table of CBRP has all only one hop distant neighbor nodes. PCBRP, proposed in this paper, ties two clusters in one paired cluster to make longer radius. Then the headers of the paired cluster manage and operate corresponding member nodes. In the current CBRP, when the cluster header leaves out the cluster, the delay, due to the re-electing a header, should be occurred. However, in PCBRP, another cluster header of the paired cluster plays the role instead of the left cluster header. This method reduces the routing delay. Concurrently, PCBRP reduces the delay when they route nodes in the paired cluster internally.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.879-884
• /
• 2024

Wireless sensor network technology is becoming increasingly important with the advancement of the Fourth Industrial Revolution. Consequently, various protocols such as LEACH, PEGASIS, and EEACP have been developed in an attempt to increase energy efficiency. However, the EEACP protocol still has room for improvement in terms of energy consumption during transmission. Particularly, inefficient paths associated with data reception settings may compromise the network's survivability. The proposed A-EEACP protocol optimizes data transmission direction around the sink node to reduce energy consumption and enhance the network's survivability.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.113-114
• /
• 2023

본 논문은 다양한 방향성과 멀티 홉을 고려하여 최적의 콘텐츠 제공을 위한 릴레이 차량 선택 방안을 제안한다. 도로변 기지국의 제한성으로 인해 자율 주행 차량에 탑승한 승객들이 콘텐츠를 충분히 전달받는 데에 있어서, 지연시간과 버퍼링 등의 문제가 발생할 수 있다. 따라서, 도로변 기지국의 보조를 위하여 주위의 다른 차량들을 활용하여 요청된 콘텐츠를 원활하게 제공할 수 있다. 하지만, 기존 방안들은 한 대 또는 너무 많은 차량을 무분별하게 선택함으로써 최적화된 성능을 도출할 수 없었다. 그러므로, 본 논문은 요청 차량과 같은 방향으로 이동하는 1 차 릴레이 차량을 선발하는 데에 있어서 반대쪽에서 오는 2 차 릴레이 차량의 사전 캐싱량을 활용하는 방안을 제안한다. 1차 릴레이 차량의 충분한 요청 차량과의 연결 시간에 비교하여 부족한 사전 캐싱량을 2 차 릴레이 차량들로 보충함으로써 지연시간과 버려지는 패킷을 최소화할 수 있다.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.525-534
• /
• 2005

This paper is concerned with the query slipping and its prevention for trajectory-based matchmaking service in wireless sensor networks. The problem happens when a query propagating along a subscribe trajectory moves through a publish trajectory without obtaining desired information, even though two trajectories intersect geometrically. There follows resubmission of the query or initiation of another subscribe trajectory Thus, query slipping results in considerable time delay and in the worst, looping in the trajectory or query flooding the network. We address the problem formally and suggest a solution. First, the area where nodes are distributed is logically partitioned into smaller grids, and a grid-based multicast next-hop selection algorithm is proposed. Our algorithm not only attempts to make the trajectory straight but also considers the nodal density of recipient nodes and the seamless grid-by-grid multicast. We prove that the publishing and subscribing using the algorithm eventually eliminate the possibility of the slipping. It toms out that our algorithm dissipates significantly less power of neighbor nodes, compared to the non grid-based method, as greedy forwarding, and the fixed- sized grid approach, as GAF (Geographical Adaptive Fidelity)