• 세라미스트
• /
• 제6권3호
• /
• pp.12-18
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.291-295
• /
• 2002

Ceramics are very difficult-to-cut materials because of its high strength and hardness. Their machining process can be characterized by cracking and brittle fracture. Generally, ceramics are machined using traditional method such as grinding and polishing. However, such processes are generally costly and have low material removal rate. In this paper, to develop machinable ceramics those have good machinability without losing their material properties, machinability evaluations are performed by applying the experimental design method. In this paper, to evaluate the machinability of the developed ceramics, various workpieces are machined on the CNC machining center, and surface roughness are measured under predefined process parameters obtained using Taguchi method. And the experimental results are investigated to derive optimum cutting parameters for the given materials.

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.15-21
• /
• 2004

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 5, 10, 15, 20, 25 and 30%. The objectives of this paper is to evaluate the fracture phenomenon of the tungsten carbide tool and the variation of surface integrity of the manufactured machinable ceramics under various cutting conditions during end mill machining With CNC machining center.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.597-602
• /
• 2002

Ceramics are very difficult-to-cut materials because of its high strength and hardness. Their machining mechanism is characterized by cracking and brittle fracture. In this paper, to give good machinability to the ceramics, BN powders are added to Si$_3$N$_4$ by volume of 20, 25 and 30%. And the machiniability of the produced ceramics are tested using micro drilling system. Through required experimental works, it is shown that the micro drilling machinability is varied along with the volumetric percentage of BN powders. Also, it is verified that the obtained results can be used to develop new machinable ceramics of good material properties and machinability.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.61-70
• /
• 2004

Generally, ceramics are very difficult-to-cut materials because of its high strength and hardness. The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Ceramics can be machined with traditional method such as grinding and polishing. However, such processes are generally cost-expensive and have low material removal rate. Thus, in this paper, to overcome these problems. BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 5,10,15,20,25 and 30%. And, mechanical properties, R-curve behavior and machining tests are carried out to evaluate the machining properties of the manufactured machinable ceramics.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.33-39
• /
• 2004

Sandblasting has recently been developed into a powder blasting technique for brittle materials. In this study, the machinability of $Si_3N_4$-hBN based machinable ceramics are evaluated for micro - pattern making processes using powder blasting. Material properties of the developed machinable ceramics according to the variation of h-BN contents give a good machinability to the ceramics. The effect of scanning times, the size of patterns and variation of BN contents on the erosion depth of samples without mask and samples with different mask patterns in powder blasting of $Si_3N_4$-hBN ceramics are investigated. The Parameters are the impact angle of $90^{\circ}$, the scanning times of nozzle up to 40, and the stand-off distances of 100mm The widths of masked pattern are 0.1mm 0.5mm and 1mm. The powder used is Alumina particles, WA#600. and the blasting pressure of powder is 0.2MPa. Through required experiments, the results are investigated and analyzed. As the results, the machinability of the developed ceramics increases as the BN contents in the ceramics.

• 한국세라믹학회지
• /
• 제45권1호
• /
• pp.75-81
• /
• 2008

In this study, machining characteristics of AIN-hBN composites were evaluated in end-milling process. As a first step, AIN-hBN composite specimens with various hBN contents were prepared using hot press method. Material properties of the composites, such as relative density, Young's modulus and fracture toughness, were measured and compared. Then, a series of end-milling experinients were performed under various cutting conditions by changing cutting speed, depth-of-cut and feed rate. Cutting force variations were measured using a tool dynamometer during the cutting experiments. Machined surfaces of the specimens were observed using SEM and a surface pro filer to investigate the surface integrity changes. The cutting force decreased with an increases of hBN content. The cutting process was almost impossible for monolithic AIN, owing to severe chipping. In contrast, at high content of hBN, surface damage and chipping decreased, and better surface roughness can be obtained.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.104-111
• /
• 2008

The objective of this study is to evaluate micro end-milling characteristics and tool wear behavior of AlN-hBN composites. First, AlN based composites with hBN contents in the range of 10 to 20vol% were prepared by hot-pressing. Vickers hardness and flexural strength of the prepared composite specimens were measured and compared according to the vol% of hBN variations. Then, cutting force variations were measured and analyzed using a tool dynamometer during the micro end-milling experiments; and machined surface shapes and roughness were investigated using a 3D non-contact type surface profiler. After micro end-milling, worn tools were investigated using a tool microscope and SEM images. From the experimental results, it can be observed that the cutting forces decreased, and surface qualities were improved with increasing hBN contents. At low content of hBN, tool chipping was observed; and tool wear rate decreased with increasing hBN contents. The results of this study insist that proper machining conditions, including tool wear behavior investigation, should be determined for the micro end-milling of AlN-hBN composites for its further application.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.874-880
• /
• 2003

AIN-BN계 머시너블 세라믹의 미세조직, 기계적 성질 및 기계 가공성에 미치는 h-BN 첨가의 영향을 조사하였다. 소결체의 상대밀도는 h-BN 첨가량의 증가와 더불어 감소하였다. 또한, 4점 굽힘 강도도 AIN 단미의 238 MPa에서 30 vo1% BN 첨가에 의해 182 MPa까지 감소하였다. 낮은 탄성계수와 AIN 매트릭스와 h-BN 입자와의 열팽창계수의 차이에 의해 발생한 잔류인장응력에 의해 AIN-BN 복합재료의 강도가 감소되었다고 생각된다. 판상형태의 h-BN 입자에 의해 균열편향과 pull-out은 증가하였으나, 파괴인성은 BN 첨가량과 더불어 감소하였다. AIN 분말표면에 존재하는 알루미나와 소결조제인 $Y_2$O$_3$와의 반응에 의해 2차상인 YAG상과 ${\gamma}$-Al$_2$O$_3$상이 생성되었다. AIN에 10～30 vo1%의 BN을 첨가한 복합재료에 대하여 수행한 절삭시험에서 절삭력과 배분력은 h-BN 첨가량에 따라 감소하였으며, 우수한 기계 가공성을 입증하였다. 또한, 모든 시편에서 짧은 시간 내에 0.5 $\mu$m (Ra) 이하의 비교적 양호한 표면 거칠기에 도달할 수 있었다.