• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.9-14
• /
• 1990

맥동 연소기는 기존의 연속 연소식 연소기에 비하여 높은 열효율, 소형화, 연소과정의 개선, 시동후 점화플러그 및 송풍팬의 불필요, 자력 배기와 장시 간 안전 운전등의 장점들로 인하여 최근 연구대상으로서 주목을 받고 있다. 맥동연소 현상은 1800년경부터 알려졌음에도 불구하고 기본적인 연소메카니 즘 및 기본동작 원리에 대한 미비점 및 높은 소음 등으로 인하여 종래의 연 구는 거의 실험을 통하여 이루어 졌으며 이러한 것들이 현재까지도 맥동 연 소기의 발전에 걸림돌이 되고 있다. 맥동 연소기가 산업용 및 가정용 열기기 로서 사용되기 위하여 진동과 소음의 감소에 대한 엄격한 요구를 만족하지 않으면 안된다. 따라서, 그에 대한 효과적인 방지 설계를 하기 위하여 진동 원과 소음원이 어느 부위에서 전달되어 오는지를 파악하는 것이 중요하다.. 본 연구에서는 맥동연소기의 소음원을 규명하기 위하여 종래에 사용되어 온 주파수 응답함수법과 소음원간에 강한 상관관계가 존재하는 경우에 사용되 는 기여도함수법을 이용하여 다차원 스펙트럼해석법에 의하여 입출력간의 기여관계를 규명하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1727-1736
• /
• 1991

본 연구에서는 자체 제작된 헬름홀쯔형 맥동 연소기를 이용하여 작동원리와 연소특성을 조사함으로써 맥동연소현상을 물리적으로 이해하는 것이다. 주기적 화염 의 직접가시화, 연소장의 시간평균 온도 및 농도분포, 변동압력의 크기와 공기흡입량 을 조사함으로써 맥동에 영향을 미치는 요인이 무엇인지 그리고 이것이 어떠한 변화를 야기시키는가를 살펴보고자 한다. 이렇게 얻어진 결과의 종합을 통해 장치의 형상이 결정된 일반적인 맥동연소기가 자발적인 상태에서 작동될 때 작동결정인자가 무엇인가 를 알수가 있을 것으로 사료된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.810-820
• /
• 1985

배기 decoupling chamber룰 갖고 있는 맥동 연소 급수가열기에 대한 수학적인 모델링과 관련된 컴퓨터 시뮬레이션을 하였고, 이 때 계에 대한 맥동 현상과 관련된 열적 및 동적 특성을 고려 였다. 시뮬레이션결과 시동기간에 대한 계의 각 부분에서 일어나는 열전달, 압력 및 온도를 구 였고 또한 해석의 제한성과 개선의 필요성을 논의하였다. 이 연구에서 얻어진 결과는 도관에서 맥동에 의한 대류열전달을 예측하기 위한 모델을 세우는데 활용될 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.508-516
• /
• 1989

The objective of this study is to investigate on the pulsating combustion of a granular coal in a Rijke type pulse combustor. The combustor is made of a 120cm long pipe with a honeycomb as a fire grate in the lower half. A fixed amount of coal is laid on the honeycomb and burned downward after ignition by using propane gas. Then the combustion driven acoustic oscillation occurs and makes the combustion pulsate with a very high amplitude. The effect of the pulsation and the air flow rate on the combustion characteristics is examined in comparison with the normal combustion. The non-pulsating combustion is made possible by placing absorbing material under the honeycomb. The combustion phenomena are observed visually, the burning time is measured in order to evaluate the combustion rate, and the variation of the gas temperatures is recorded. It is found that the fuel particle is greatly agitated like boiling by the flow pulsation and the burning-down velocity is so fast that the fuel is burned almost simultaneously. The combustion rate can be increased as twice as that of non-pulsating combustion with increase of the air flow rate. And the combustion becomes clean with less soot deposit and emission.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.64-72
• /
• 1997

An analytical study has been performed to investigate the unsteady ignition characteristics of pulse combustion. In many combustion applications, strain rate of the flow can significantly affect the combustion features; ignition, extinction, and reignition. In the pulse combustion, two jets (hot combustion gases and fresh mixtures) coming from the opposite side of the combustor will collide in the combustor forming a stagnation region where the chemical reaction is suppressed by the strain rate until this becomes below the critical value. In this research, the method of large activation energy asymptotic is adopted with one step irreversible kinetics to examine the ignition response to the periodic variation of the strain rate of flow. The results show the variation of the maximum value of strain rate can determine whether the ignition or extinction occur.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.676-684
• /
• 1990

This study is on the pulsating combustion of premixed gas in a Rijke type combustor made of a honeycomb flame holder in a tube. Modelling for the onset condition of the oscillation is made by the ratio of the acoustic power generation based on the analysis of heat transfer to the power loss due to the thermoviscous dissipation and radiation. Experiment is performed for the characteristics of acoustic, thermal and combustion. It is shown that the theoretical modelling for the oscillation may be used as a limit condition. And the combustion analysis for the acoustic power generation is needed for better prediction of the onset condition. Experimental result shows that, by pulsation, the flame length is shortened and the flame temperature is decreased with increase in the heat transfer coefficient. The NO$_{x}$ concentration in the exhaust gas is significantly reduced by pulsation and the concentration of unburned hydrocarbon shows a little increase.e.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1372-1380
• /
• 1988

A heat transfer model for a pulse combustion water heater is developed, and an associated computer simulation is conducted to determine the temperature distribution as well as heat transfer rate. Parametric studies are performed to examine the effects of the operating and design variables on the thermal performance and heat transfer rate. They are found to be influenced mainly by energy input rate, the amount of excess air, the volume of combustion chamber, and the diameter of flue tube.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.539-545
• /
• 2011

Combustion characteristics of industrial radiant tube (RT) burners with forced oscillating combustion technology are investigated using a real-scale (125,000 kcal/h) industrial RT burner facility in both laboratory and field tests. Three different types of industrial RT burners using a by-product gas from the iron-and-steelmaking process are examined in a laboratory facility equipped with a W-type RT. During the field tests, an industrial RT burner is characterized in a large facility equipped with multiple RTs. Their performance and emission controls are investigated under diverse operating conditions. The feasibility of the forced oscillating combustion technology is evaluated by the extent of $NO_x$ reduction and the efficiency improvement. These improvements are able to save energy, extend the RT lifetime, and enhance productivity. The operating conditions that achieve the best performance and emission control for each RT burner are determined.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.2
• /
• pp.123-133
• /
• 1987

• 한국기계연구소 소보
• /
• s.17
• /
• pp.13-21
• /
• 1987