• Journal of the Korean GEO-environmental Society
• /
• v.8 no.5
• /
• pp.31-38
• /
• 2007

The practical design method on sandmat uses a drain length, rate of consolidation settlement and permeability of sand as a major design factors. And, on the basis of this design process, it has been installed beneath the embankment with same thickness. However, the possibility the underestimation on the thickness of sandmat and the delayed drain have been pointed out by several authors caused by a differential settlement at the center and the end of embankment. In this study, therefore, the effect of the differential settlement on the thickness of sandmat and delayed drain through the numerical analysis of embankment was analyzed. As a result, a substantial sandmat thickness becomes small and the possibility of the delayed drain can be certified because of the development of differential settlement at the center and ends of embankment. As a countermeasure to overcome this problem, the applicability of the mound type sandmat was also investigated by the numerical method. It can be concluded that it maintains the designated substantial sandmat thickness throughout consolidation process, and is useful method to maintain the drain capacity. Especially, the mound type sandmat is effective method for a construction site where can cause a differential settlement such as embankment. Furthermore, it has to be designed on the basis of the accurate prediction of consolidation settlement as well as rate of consolidation settlement, drain length and permeability of sand.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.225-230
• /
• 2005

At present, there are several problems related with sand mat which is used as a way to accelerate consolidation settlement, to act like an underground drainage layer and to increase trafficability simultaneously. First of all, the unbalance of the demand and supply of sand is one of the biggest problems, which causes not only price rise but also delay of the term of the total construction work. Secondly, the damage of ecosystem and scenery is triggered by thoughtless sand dredging or mining. So, the need that sand mat should be replaced with a new environmentally friendly material has been increased. Fiber mat may be one of the proper materials that suits the need. Therefore, we intended to compare the drainage properties of sand mat with those of fiber mat by experimental model tests. On the basis of the test results, fiber mat took shorter period of consolidation than sand mat and the amount of settlement in the farmer showed a little bit bigger than in the latter. As a conclusion, the substitutability of sand mat with fiber mat could be placed highly in view of drainage efficiency. Furthermore, when fiber mat is used, it has an advantage that spoiled soil of the construction site or nearby site can be used for the purpose of increasing trafficability in addition to a role of drainage layer.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.192-196
• /
• 2011

This study was conducted to develop the suitable plant mat for garden mum. The results about growth 2 months after cutting of garden mum (Dendranthema grandiflorum 'White Miri') under 6 different plant-mat treatments using coir tape were as follows. The majorities of cuttings were withered under treatments of non-soiled 15 mm thick mat (C treatment). On the other hand, the same thick mat having a hole filled with soil 3 mm in diameter (D treatment) and the 30 mm thick mat having a hole filled with soil (F treatment) showed the best growth results. The survival rates of treatments D and F showed the higher rates of 100 and 90%, respectively than those of respective 56.3 and 20% of two layers without medium (A treatments) and C treatment having respective 10 and 15 mm thick non-soiled mats. The plant height showing the similar tendency with the result of the survival rate was shown with the lower value of 7.97 and 7.15 cm, respectively under treatments A and C, compared with the higher value of 9.74 and 9.80 cm respectively under treatments D and F. For flower gardening, it is better to adopt treatment D based on the our investigational results that treatment D required less soil than treatment F and had no trouble with forming adventitious roots for manufacturing mats and effective transferring.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.109-116
• /
• 2024

The Rapid Hardening Composite Mat (RHCM) is a product that improves the initial strength development speed of conventional Geosynthetic Cementitious Composite Mats (GCCM). It offers the advantage of quickly securing sufficient strength in railway slopes with insufficient formation level, and provides benefits such as preventing slope erosion and inhibiting vegetation growth. In this study, an analysis of the practical applicability of RHCM in railway settings was conducted through experimentation. The on-site applicability was assessed by categorizing it into fire resistance, durability, and stability, and conducting combustibility test, ground contact pressure test, and daily displacement analyses. In the case of South Korea, where a significant portion of the territory is composed of forested areas, the prevention of slope fires is imperative. To analyze the fire resistance of RHCM, combustibility tests were conducted as an essential measure. Durability was assessed through ground contact pressure tests to analyze the deformation and potential damage of RHCM caused by the inevitable use of small to medium-sized equipment on the construction surface. Furthermore, daily displacement analysis was conducted to evaluate the structural stability by comparing and analyzing the displacement and behavior occurring during the application of RHCM with railway slope maintenance criteria. As a result of the experiments, the RHCM was analyzed to meet the criteria for heat release rate and gas toxicity. Furthermore, the ground contact pressure was observed to be consistently above 50 kPa during the curing period of 4 to 24 hours under all conditions. Additionally, the daily displacement analyzed through field site experiments ranged from -1.7 mm to 1.01 mm, confirming compliance with the criteria.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.45-53
• /
• 2008

The animatronics technique could be very important fact of technique not only to achieve full completion of visible image but also to offer lots of chances to express images by merging CG, special effects and special devices. In this thesis, we design and implement the Zigbee-based wireless transceiver and communication program to control animal animatronics such as a dog and bear. The wireless control utilizing the Zigbee protocol is that electrically consumption is more small than the Bluetooth and reliability of data transmission is better. The implemented control systems and program have the normal and replay function for control of animal models. This functions and operability are tested by a designed animatronics prototype under the wireless environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.172-176
• /
• 2011

최근 들어 생활수준의 향상과 친수 환경에 대한 인식이 높아지면서 하천환경의 보전과 개선에 대한 필요성이 증대되고 과거 이수 또는 치수 목저으로 정비되었던 하천을 자연형 하천으로 탈바꿈 시키려는 움직임이 많이 일어 나고 있다. 자연형 하천 공법의 연구는 1990년대부터 점차 이루어 지고 있으나, 호안의 식생 공법 연구 및 수리 실험을 이루어 지지 않는 실정이다. 이제 본 연구에서는 자연형 하천 정비의 대표적인 방법인 호안 사면 처리 공법 중 지오셀 식생 매트에 대한 수리모형 실험을 실시하였다. 고정상 실험을 통하여 활착된 지오셀 식생 매트가 허용할 수 있는 유속과 수위를 정하는데 목적을 두었고, 상사법칙 이론을 도입하여 수행된 실험결과를 정리 분석하였다. 분석된 실험치를 왜곡모형에 적용하여 실제 규모로 환산한 결과 현재 설계시 허용되는 유속에도 지오셀 식생 매트의 안정성이 확보되는 것을 확인할 수 있었다. 따라서 호안의 지오셀 식생매트의 적용이 가능 할 것으로 보이나, 제한적인 실험결과에 의해 왜곡모형을 이용하여 현장조건을 추정한 것이므로 적용 및 해석에 있어서는 실제 설치되는 하천의 복잡한 수리 수문학적인 변수가 충분히 고려되어야 할 것이다.

• Korean Journal of Materials Research
• /
• v.7 no.12
• /
• pp.1097-1104
• /
• 1997

인산형 연료전지(PAFC)용 전해질 매트릭스의 표면 거칠기를 감소시켜 분극저항을 줄이고 작업성을 향상시키기 위해 SiC whisker를 사용하여 일반적인 테이프 캐스팅법으로 제조된 매트릭스의 거친 표면을 평탄화 처리하였다. 구형 입자의 분무공정을 이용하여 표면 평탄화 처리(process l)하는 경우와 롤링을 이용하여 표면 평탄화 처리(process 2)하는 두가지 공정을시도하였으며, 두가지 공정 모두 기공율과 인산 함침도를 유지시키면서, 매트릭스의 표면 거칠기를 감소시키고 기공압, 가소성 및 인장강도를 향상시킬 수 있었다. 위와 같이 제조한 매트릭스로 연료전지를 구성하여 교류 임피던스 분석을 한 결과, 표면 평탄화 처리는 매트릭스 표면의 거칠기를 감소시킴으로써 전극과의 접촉시 계면에서의 분극 저항을 감소시켜 전지성능을 향상시키는 것으로 나타났다. process 2는 표면의 거칠기 감소뿐 아니라 표면에서의 인산함침도가 커서 가장 우수한 전지특성을 나타내었으며, process 1은 매트릭스 표면에 불규칙하게 존재하는 거대 기공을 완전히 제거하고 기공압을 크게 향상시킬 수 있기 때문에 대형의 매트릭스 제조를 가능하게 하였다.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.461-467
• /
• 1995

In this study, the release experiments of drug were operated in the phosphate buffer solutions of pH 7.4 and pH 1.2 by using drug carriers(chitosan, chitosan hydrochloride, and sulfonated chitosan)coated by poly(DL-lactide) with prednisolone for delivery drug. The release time of drug was more delayed in pH 7.4 than in pH 1.2. The release time of according to the kinds of drug carrier was delayed in the order of chitosan, sulfonated chitosan, and chitosan hydrochloride. In short, the formulation allows biodegradable coated monolithic polymetic matrices to suppress the burst effect of the drug release mechanism, which led to the sustained release pattern.

• Journal of the KSME
• /
• v.16 no.4
• /
• pp.49-54
• /
• 1976

유한요소법이 처음 연구되기 시작할 때는 변위를 가변수로 하는 매트ㄹ스 변위법(Matrix Displacement Method) 과 외력을 자변수로 하는 매트ㄹ스 힘 방법(Matrix Force Method)외 두 길로 발전되어 갔었으나 경계 조건의 적용과 매트ㄹ스 분활(Partitioning)에 있어서 후자의 방법이 많은 번거로움을 갖는다는 것이 인정되어 오늘날은 전자의 방법 만이 사용되는 형편이다. 본 해 설에서는 유한요소의 기본성질을 모두 가지면서도 제일 간단한 보유한요소(Beam Finite Element )를 예로 다루며 유한 요소법의 기본이론과 응용방법을 설명코저 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2112-2116
• /
• 2009

최근 자연환경보전이라는 새로운 패러다임의 대두로 하천환경의 보전과 개선의 필요성에 대한 공감대가 형성되기 시작하였으며, 하천의 환경적 기능을 고려하는 관리방안이 제시되고 있다. 이를 반영하는 것이 최근 활발히 논의되고 있는 하천기능 복원기술의 개발이다. 이는 하천정비나 관리에 있어서 하천의 생태적 기능에 초점을 맞추는 것으로 1990년대 이후 확산된 환경기능을 고려한 하천정비 및 관리보다 구체화된 하천의 생태환경기능의 회복을 포함하고 있다. 본 연구에서는 내구성이 강화된 식생매트를 개발함에 있어 라텍스를 이용한 친환경 코팅 매트를 개발하여 식물의 정착효과를 비교분석하여 효율적인 저수호안공법을 제시 하였다.