• Journal of Food Hygiene and Safety
• /
• v.37 no.2
• /
• pp.69-79
• /
• 2022

The purpose of this study is to monitor the pesticide residues in frozen fruits and vegetables distributed and sold in online and offline markets in Korea. For the study, 107 samples of 34 types of frozen fruits and vegetables were examined, and a total of 341 pesticide residues were analyzed by using multiclass pesticide multi-residue methods of the Korean Food Code. As a result, pesticide residues were detected from 16 of 64 frozen fruits samples and 15 of 43 frozen vegetables samples. Conclusively, residues were detected from 31 samples in total, showing a detection rate of 29.0%. Specifically, pyridaben exceeded the Maximum Residue Limits (MRLs) based on the Positive list system (PLS) in one of the frozen radish leaves, and the violation rate was 0.9%. Detection on frozen fruits and vegetables was made 23 times for 11 types and 36 times for 21 types. In total, 28 types of pesticide residues were detected 59 times. Fungicides were detected the most in frozen fruits, while insecticides were detected the most in frozen vegetables. The most detected pesticides were the insecticide, acaricide chlorfenapyr (5) and the fungicide boscalid (5). Chlorfenapyr was detected only in frozen vegetables, and boscalid was detected in frozen fruits except one.

• Journal of Food Hygiene and Safety
• /
• v.37 no.4
• /
• pp.260-270
• /
• 2022

In this study, we tested for pesticide residues in 114 samples representing 20 different types of fruit circulating in Gyeonggido. A total of 341 pesticides were identified via a multi-residue method using GC-NPD, GC-ECD, GC-MSMS, and LC-MSMS. In whole fruit, pesticides were detected in 48 cases, with a concentration range of 0.0025-0.1663 mg/kg. In the peels, pesticides were detected in 85 cases, with a concentration range of 0.0026-4.7185 mg/kg and a higher average concentration than was found in whole fruit. In the pulp, pesticides were detected in 8 cases, with a concentration range of 0.0021-0.0993 mg/kg. In most of the peels, pesticides were detected below MRL. In the kiwi peel, deltamethrin (with an MRL of 0.05 mg/kg) was detected at 0.1020 mg/kg. Since MRLs are applied to whole fruit, these levels are not unsuitable for ingestion. However, washing is recommended before ingestion to promote healthier and safer inclusion of the peel in the diet. Continuous monitoring of the peel and pulp is indicated.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.453-459
• /
• 2018

This study was performed to investigate the contamination levels of heavy metals (such as lead, cadmium, arsenic and mercury) and aflatoxin (such as $B_1$, $B_2$, $G_1$ and $G_2$) in commercial herbs for food and medicine. The concentrations of the heavy metals were measured by the ICP-MS and a mercury analyzer. The aflatoxins were analyzed by a HPLC-florescence coupled with photochemical derivatization. The detection ranges of the lead, cadmium, arsenic and mercury were found to be 0.006~4.088 mg/kg, 0.002~2.150 mg/kg, ND~0.610 mg/kg and ND~0.0139 mg/kg respectively. Among the total samples, the 3 samples (2.6%) were not suitable for the specification of cadmium by the MFDS (Ministry of Food and Drug Safety). The 13 samples of the total 117 samples were aflatoxin positive (11.1%). The amount of aflatoxin $G_1$ was $0.7834{\mu}g/kg$ in the Puerariae Radix and aflatoxin $G_2$ were $0.3517{\mu}g/kg$, $0.4881{\mu}g/kg$ in two samples of the Glycyrrhizae Radix et Rhizoma, respectively. The aflatoxins $B_2$ and $G_1$ were simultaneously detected in the 10 Angelicae Gigantis Radix. The detection ranges of aflatoxins $B_2$ and $G_1$ were $0.2324{\sim}1.0358{\mu}g/kg$ and $0.7552{\sim}1.6545{\mu}g/kg$ respectively in Angelicae Gigantis Radix. The results of the current study suggest that continuous monitoring is needed for the proactive management of commercial herbs for food and medicine safety.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.297-303
• /
• 2007

Orimulsion, a bitumen-in-water emulsified fuel, has been used throughout the world as a substitute fuel for heavy oil and coal. Orimulsion has relatively high levels of sulfur, nickel, and vanadium, compared to other fuel oils and coals, and has been the subject of much debate regarding the environmental impacts. In Korea, Y power plant has operated boilers with Orimulsion as a fuel, and they has some drawbacks during the plant operation, such as plume opacity. In this study, we investigated the cause of formation mechanism and factors for the plume opacity by investigating the operation data, and measuring the particle size distribution at EP(Electrostatic Precipitator), FGD(Fuel Gas Desulfurization) and TMS(Telecommunications Management System) units. Resulting data showed the primary particles below 1 ${\mu}m$ formed were regrown by the recombination of $SO_3$ in wet-limestone FGD process, and thus the secondary particles are induced to cause the plume opacity.

• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.59-74
• /
• 2003

Prospecting for energy and mineral resources is essential kind of public fundamentals that manage the nation's economy. Most explorations in the past were concentrated in the simple structural traps in relatively shallow depth. Due to their vast exploitation, recent history has shown that the emphasis in explorations has steadily shifted toward the subtle stratigraphic traps in deeper level. Increasing exploration for the subtle stratigraphic traps in deeper level requires precise correlation and assessment of deeply buried strata in the basin. However, the descriptive strati-graphic principles used for evaluation of the simple structural traps are limited to delineate the subtle stratigraphic traps in deeper depth. As this occurs. it is imperative to establish a new stratigraphic paradigm that allows a more sophisticated understanding on the basin stratigraphy. This study provides an exemplary application of integrated stratigraphic approach to defining basin history of the Middle Ordovician Taebacksan Basin, Korea. The integrated stratigraphic approach gives much better insight to unravel the stratigraphic response to tectonic evolution of the basins, which can be utilized fer enhancing the efficiency of resources exploration and development in the basins. Thus, the integrated stratigraphic approach should be emphasized as a new stratigraphic norm that can improve the probability of success in any type of resources exploration and development project.

• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.549-557
• /
• 2020

Recently, the number of coffee shops has continued to increase, and information searches have been increasing for consumers who want to visit coffee shops. We wanted to find out the impact on the intention of revisiting a coffee shop by adding information search factors to the existing coffee shop's selection properties and search for the actual selection properties, and summarize the results as follows. The analysis of this study was conducted in two ways, before and after visiting a coffee shop through information search. First, the four factors and optional attributes that are important in information retrieval were the reliability of information (the number of reviews and views by coffee shops, recent postings), physical environment (the proximity of stores, the atmosphere, size, presence of side menus), visuality of information (physical environment, background, design, easy composition), merchantability (the taste of coffee, convenience of parking). In addition, the selection properties for satisfaction after visiting coffee shops through information search were derived from five general characteristics of coffee shops, menu, information consistency, taste of coffee, and convenience of parking, and among them, the consistency of information, taste of coffee, and general characteristics of coffee were found to affect the intention of revisiting again.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.35-47
• /
• 2002

Soil and rock were yielded during construction of subway in Taegu. Produced rock is a kind of a sedimentary rock with low strength and low durability of shrinkage. So it is difficult using for resources engineering. But in our country, it is very important to use material resources due to lack of natural resources. In this study, after cracking sedimentary rock like black shale and red shale, they are compared with granite which usually used road constriction field to investigate property of use for road construction. Consequently, the engineering character of origin rock is satisfactory, but the soundness test, black shale and red shale are less than KS 12.9%, 37.5% respectively. The result of concrete freezing-thawing test shows that the strength among three materials is not a wide difference but red shale has relatively low strength. The result of asphalt freezing-thawing test with 50 cycles indicates that the stability of red shale in lower than KS 484~561kg on base course, 336~375kg on surface course respectively. A further research should be needed for propriety to the material of shale.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.65-75
• /
• 2015

The CBM(Coalbed Methane) development technology being developed in mid 1980s is the technology to produce the methane gas absorbed in the coal bed. CBM is easy to be developed and its coal deposit is abundant. Therefore, the CBM industry has a large potential as an energy source as well as to deal with the global regulations for reducing greenhouse gas emission. In order to produce coal, the CBM should first be developed as a preliminary action for mine security. So CBM is advantageous in reducing the global greenhouse gas as well as its advantage not being influenced by the changes in gas market. The ECBM (Enhanced Coalbed Methane) is a new technique producing the methane gas which is substituted and disorbed from coal by injecting $CO_2$ or $N_2$ gas into a coal bed. Especially, $CO_2$-ECMB is a low-carbon, green-growth technology, so can expect to the effect of green gas reduction as well as the improved productivity of methane gas. CBM technology is being developed in about 40 nations including Canada, Australia, China, India, Indonesia and Viet Nam, and the coal output using this technology is continually being increased. The CBM is expected to contribute in changing the energy source paradigm from current coal & petroleum energy to unconventional gas.

• Economic and Environmental Geology
• /
• v.48 no.5
• /
• pp.391-400
• /
• 2015

Korea is a global steel producer and a major consumer while iron ore producing is very low compared to the demand. On the other hand, North Korea holds tremendous amount of iron reserves and, however, its producing rate is limited. Moreover, the data regarding mineral resources of North Korea is very limited and uncertain because of political isolation. This study estimated the amount of iron ore resource and production amount for the Musan Iron mine, the world-known open-pit mine of North Korea, using satellite imagery(Landsat MSS, ASTER) and digital maps between 1976 to 2007. As a result, the mining area of Musan mine was increased by $6.1km^2$ during the 30 years and the mining sector was estimated as $4.9km^2$. We estimated the iron resources and production amount of 0.7 and 0.2 billion metric tons, respectively based on 3D modeling and average iron ore density of Anshan formation in China. This amount indicates 8.1 million tons of annual average production and it coincides well with previous reports. We expect this study would be utilized significantly on inter-Korean exchange programs by providing trustable preliminary data.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.73-83
• /
• 2017

The surveyed mines are located in a polymetallic vein, replacement, and skarn mineral district in the central Andes of Peru. Iscaycruz, which includes underground and open pit mines that produce zinc and lead concentrates, was the largest mineral deposit of an important group of base metal deposits in the Andes of central Peru. The deposits are sub-vertical seams of polymetallic ores(Zn, Cu, and Pb). These seams are hosted by Jurassic and Cretaceous sedimentary rock formation. The intrusion of igneous rocks in these formations originated metallic deposits of metasomatic and skarn types. The Raura mine is composed of polymetallic deposit of veins and replacement orebodies. The main sedimentary unit in the area is Cretaceous Machay Limestone. The Raura depression contains several orebodies each with different mineralization: predominantly Pb-Zn bearing Catuvo orebody; Ag-rich galena-bearing Lake Ninacocha orebody; Cu-Ag bearing Esperanza and Restauradora orebody. Huaron is a hydrothermal polymetallic deposit of silver, lead, zinc, and copper mineralization hosted within structures likely related to the intrusion of monzonite dikes, principally located within the Huaron anticline. Mineralization is encountered in veins parallel to the main fault systems, in replacement bodies known as "mantos" associated with the calcareous sections of the conglomerates and other favourable stratigraphic horizons, and as dissemination in the monzonitic intrusions at vein intersections.