• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.344-349
• /
• 2012

This paper describes experimental results and their analysis on the new test images, called as the McMaster image dataset, to develop demosaicking techniques. The well-known image dataset for demosaicking is so far the Kodak image dataset. However, different results have been reported, as the new image dataset is engaged in developing demosaicking techniques. Thus, we conduct a series of experiments on both the McMaster dataset and the Kodak dataset; we analyze and compare those experimental results; and we provide the peculiar features of the new dataset. Also, the experimental results and their analysis indicate that the McMaster dataset deserves to be a test image dataset for future demosaicking techniques; thus, we expect they can be utilized as basic data for demosaicking.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1524-1527
• /
• 1997

로봇기술의 발달로 인하여 로봇의 활용 분야는 점차 확대되고 있으며 의료 및 재활분야에도 이용되는 추세이다. 의료분야에 이용되는 메디칼 로봇은 최소 절개 수술에 적용하는 경우 많은 이점을 얻을 수 있다는 점과 전문의사가 현장에 있기 힘든 오지나 낙도 또는 전쟁터 같은 곳에서도 원격 수술이 가능하다는 장점으로 많은 관심을 받고 있다. 원격 수술은 수술 계획, 로봇에게 환자 등록, 원격 수술 시행의 세가지 과정을 거치게 된다. 본 논문에서는 원격 수술을 위한 위 과정의 연구 동향을 기술하고 현재 본 실험실에서 수행하고 있는 연구 내용을 다룬다. 원격 수술을 위한 의료시스템을 구축하기 위해 팬-틸터 구동부를 가지 스테레어 시각 시스템을 제작하고 여기서 얻어지는 정보를 HMD에 투시하여 현장감을 느끼게 만드는 것과 수술대에서 환자를 수술하는 듯한 느낌을 제공할 수 있는 기술인 매스터 조작기와 슬레이브 조작기 사이의 힘 피드백 구현에 대해 다룬다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1692-1695
• /
• 1997

In this paper, a new control scheme for master-slave control of telerobot is proposed. The porposed method can be classified into unilater master-slave control methods in the aspect of the data flow. But the master arm in the proposed control scheme can deliver operator the similar kinesthetic sense as other bilateral force reflecting master arms do. The principle concept is that the sensed operator's force/torque is used as the reference input for a damping controller type of telerobot controller which track the operators efforts. Master arm and master controller can be implemented in a simple form, and it needs not be driven by actuators, but force sensing capability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.290-294
• /
• 1995

In master-slave teleoperation system, time delay may be a critical problem because a task is performed over a distance. Even if the system is stable without time delay, time delay can make the system unstable. In this paper a new control scheme applicable to the system with time delay would be proposed,which is based on the conventional position-position feedback type controller. The stability of this control system is proved using scattering theory, and is compared with the conventional ones. By performing the simulation of a one-d.o.f master-slave system, the validity of the proposed algorithm is verified.

• The KIPS Transactions:PartA
• /
• v.18A no.1
• /
• pp.25-32
• /
• 2011

NoC is actively being studied recently in order to overcome the limitations of shared-bus architecture. We proposed an NoC architecture which employs a buffer that plays a similar role of a proxy server in a computer network to enhance the communication efficiency of NoC architecture. In the proposed NoC architecture, whenever the master has a difficulty in communicating with the slave directly, the master communicates with the proxy server which is able to communicate with the slave on behalf of the master. With the proposed scheme in NoC, we can increase the speed and the bandwidth of communication channel. The experimental results showed that overall communication efficiency was significantly improved by sending the packets to the proxy server rather than holding them in the switch buffer.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.245-248
• /
• 1997

The control modes used in teleoperation are position control mode, and rate control mode. This paper presents the problems of the conventional control modes, through simulation, proposes an intelligent mixed control mode that converts the operation mode between the position mode and the rate mode intelligently by judging the operator's intention using the real-time measurement data. The effectiveness of the proposed intelligent mixed control mode is demonstrated and compared to other typical control modes through simulation and actual experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.343-347
• /
• 1992

In this paper, an unilateral teleoperation system using an universal master arm is developed. This system is composed of an universal master arm, a slave arm and a telerobot controller. The universal master arm has a vertically articulated type link structure, while an industrial robot is used as a slave arm. As the shapes of master arm and slave arm are different, the workspace mapping is needed, which maps the workspace of master arm to that of slave arm. Experimental results show that the slave arm of the developed system effectively follows the operator's motion.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.833-836
• /
• 1998

The propose of this paper is to implement the master slave control with non-actuated Master Arm scheme by using spaceball. The spaceball is a device which can receive all 6-DOF at once and was selected because it isn't dependent to robot type or it's DOF but can be used to produce information about 3D coordiante system The proposed method's main benefit is that one who has no idea about robot structure can control the manipulator with easy. The simulation is supported with 3 modes of control to accomodate unexpected situation. The proposed implementation has probed that a non-trained user can manipulate the slave with intuition without much difficults.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.594-597
• /
• 1995

A hand controller in teleoperation is a man-machine interface device that provides real-time interaction between a human operator at control site and a slave manipulator at remote site. In this paper, we examine the design issure related to various types of hand controllers in use. Emphasis is placed on bilateral hand controllers and their design parameters. We describe the design of a new 6 degree-of-freedom universal force-reflecting hand controller to control a remote Schilling Titan manipulator. This hand controller allows the operstor to maintain spatial corresponence in remote manipulative operation and fell a sense of contact with the environment. Finally, we demonstrate the graphic simulation of the hand controller to verify its design characteristics.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.461-465
• /
• 1996

Position and rate control modes arc the two common modes for controlling remote manipulators with joysticks or hand controllers. Generally, position mode is easier for teleoperation than rate modes, when the manipulation work space is small or comparable to the human operator's control space. When the telemanipulator's work space is very large, human operator's control motion range must be large to allow telemanipulator's full range of motion resulting poor control resolution. One way to solve the poor resolution problem is to use indexing. However, rate mode can provide any higher degree of resolution without use of indexing. If two modes are mixed, master controller will be more convenient. The mixed mode algorithm, changes operating mode from position mode to rate mode or vise versa using fuzzy logic. The fuzzy logic algorithm, which has been designed to recognize the teleoperator's intended motion properly, provides an intelligence to a master controller.