• Water for future
• /
• v.23 no.3
• /
• pp.341-350
• /
• 1990

Precise run-off forecasting depends on the ability to predict quantitative rainfall intensity. This study suggests a stochastic model for 1 hour order rainfall prediction. The model simultaneously predicts rainfall intensity at all telemetered rain-gauge locations. All model parameters, velocity and direction of storm movement, radial spectrum, dimensionless time distribution of rainfall, are estimated from telemetered and historical data for the basin being predicted. Also the estimated parameters are based on the previous study. The results are the influence of dimensionless time distributions on the prediction and the model on run-off.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.50-50
• /
• 2016

하천에서 유사 및 오염물질의 이동을 예측하기 위하여 초점을 두는 것에는 두 가지 요소가 있다. 입자의 농도로 나타낼 수 있는 양의 개념과 입자의 위치로 나타낼 수 있는 공간의 개념이 그것이다. 유사 입자와 같이 그 비중이 물보다 큰 경우, 흐름 내에서 침전과 부상의 메커니즘을 반복하게 되는데 최종적으로 바닥에 침적하는 위치는 하상변동, 서식처 등 하천관리의 다양한 측면에서 매우 중요하다. 유사 입자가 바닥에 침적하는 위치를 예측하는 데에는 난류와 지형 같은 많은 불확실한 요소가 내포되어 있어, 같은 크기의 유사 입자라 하여도 하나의 exact point로 도달하지 않는다. 이러한 불확실한 요소를 고려하여 침전 위치를 산정하는 방법에 대한 연구가 필요하다. 따라서 본 연구에서는 침전 위치를 확률밀도함수로 나타내어 분석하고자 한다. 입자의 침전 위치를 확률밀도함수로 나타내기 위하여 입자 기반의 추적 모형을 사용하여 위치 데이터를 얻었으며, 이를 실험데이터와 비교하여 검증 후 확률밀도함수로 나타내었다. 그 결과 입자의 침적 위치에 대한 확률밀도함수는 로그정규분포를 띠고 있음을 확인하였으며, 확률밀도함수를 나타내는 매개변수를 물리 기반 회귀모형식으로 일반화 하여 나타낼 수 있었다.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.383-391
• /
• 2005

In this paper, a new anisotropic diffusion based on Alvarez, Lions, and Morel (ALM) diffusion model is proposed for the suppression of blocking artifact caused by discrete cosine transform (DCT) based image compression. The proposed diffusion model, which incorporates a 'rate control parameter' (RCP), makes it possible to reduce blocking artifacts while to preserve the edge. The RCP controls the rate between isotropic and anisotropic diffusion. Isotropic diffusion is encouraged to eliminate the blocking artifacts in a block boundary of a smooth region, while anisotropic diffusion is encouraged to keep the edge or texture sharp in edge and a block boundary within an edge region. Additionally, to avoid oversmoothness of the texture region, a 'speed control parameter' (SCP), which makes diffusion process slow in the texture region, is employed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5A
• /
• pp.361-367
• /
• 2011

This study introduces an elastic parabolic cable element for initial shaping analysis of cable-supported structures. First, an elastic catenary cable theory is shortly summarized by deriving the compatibility condition and the tangent stiffness matrices of the elastic catenary cable element. Next, the force-deformation relations and the tangent stiffness matrices of the elastic parabolic cable elements are derived and discussed under the assumption that sag configuration under self-weights is small. In addition the equivalent cable tension is defined in the chord-wise direction. Finally, to demonstrate the accuracy of the elastic parabolic cable element, nonlinear relationships of nominal cable tension-chord length and nominal cable tension-tangential stiffness for a single element are presented and compared with results using an elastic catenary cable theory as the slope is varied.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.192-197
• /
• 2012

In this paper, a non-contact microwave technique was presented to detect the surface crack of the metals. An open-ended coaxial cable line was used as a sensor at 11 GHz, and the reflection coefficients were measured by scanning along the metal surface including artificial surface cracks. A parameter, the K value which was defined as the difference between maximum and minimum reflection coefficients, was measured and used to estimate the crack depth. A linear relationship between the K value and crack depth was found. This study showed that non-contact detection of the surface cracks of metals is possible using the open-ended coaxial line sensor at X-band.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.79-88
• /
• 1999

In this paper we address the tracking method which tracks only target object in image sequence including moving object. We use a contour tracking algorithm based on intensity and motion boundaries. The motion of the moving object contour in the image is assumed to be well describable by an affine motion model with a translation, a change in scale and a rotation. The moving object contour is represented by B-spline, the position and motion of which is estimated along the image sequence. we use pattern recognition to identify target object. In order to use linear Kalman Filters we decompose the estimation process into two filters. One is estimating the affine motion parameters and the other the shape of moving object contour. In some experiments with dial plate we show that this method enables us to obtain the robust motion estimates and tracking trajectories even in case of including obstructive object.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.1113-1120
• /
• 2004

This paper proposes a novel hybrid genetic algorithm for the feature selection. Local search operations are devised and embedded in hybrid GAs to fine-tune the search. The operations are parameterized in terms of the fine-tuning power, and their effectiveness and timing requirement are analyzed and compared. Experimentations performed with various standard datasets revealed that the proposed hybrid GA is superior to a simple GA and sequential search algorithms.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.47-58
• /
• 2018

Duncan & Chang(1970) proposed the Duncan-Chang model that a linear relation of transformed stress-strain plots was reconstituted from a nonlinear relation of stress-strain curve of triaxial compression test using hyperbolic theory so as to estimate an initial tangent modulus and ultimate deviator stress for the soil specimen. Although the transformed stress-strain plots show a linear relationship theoretically, they actually show a nonlinearity at both low and high values of strain of the test. This phenomenon indicates that the stress-strain curve is not a complete form of a hyperbola. So, if linear regression analyses for the transformed stress-strain plot are performed over a full range of strain of a test, error in the estimation of their linear equations is unavoidable depending on ranges of strain with non-linearity. In order to reduce such an error, a modified regression analysis method is proposed in this study, in which linear regression analyses for transformed stress-strain plots are performed over the entire range of strain except the range the non-linearity is shown around starting and ending of the test, and then the initial tangent modulus and ultimate deviator stresses are calculated. Isotropically consolidated-drained triaxial compression tests were performed on compacted weathered soil with a modified Proctor density to obtain their model parameters. The modified regression analyses for transformed stress-strain plots were performed and analyzed results are compared with results estimated by 2 points method (Duncan et al., 1980). As a result of analyses, initial tangent moduli are about 4.0% higher and ultimate deviator stresses are about 2.9% lower than those values estimated by Duncan's 2 points method.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.8
• /
• pp.363-377
• /
• 2021

The present study investigated the effects of dynamic tubing gait training(I and II) on the postural alignment, gait, and quality of life in chronic patients with Parkinson's disease. This study is based on the case study that recruited a total of 3 patients with chronic Parkinson's disease (Hoehn and Yahr Stage of 1 to 3 each one person). Dynamic tubing gait training (I and II) applied to chronic patients with Parkinson's disease for 25 sessions, 30 minutes a day, 5 days a week, over 5 weeks period. To investigate the effects of this study, evaluating using the postural alignment test, muscle activity tests, gait analysis, and quality of life scale for patient with Parkinson's disease. After the intervention of Dynamic tubing gait training (I and II), Trunk flexion was decreased. Also, during walking from initial contact (IC) to mid stance (Mst), muscle activity of Quadriceps, Hamstring, and Tibialis Anterior (TA) was increased and muscle activity of Gastrocnemius was decreased. The muscle activation of Erector Spinae (ES T12, L3) was increased in the H&Y I and III stages and decreased in the H&Y II stage. Length of gait line, single support line, ant/post position and lateral symmetry of center of pressure (COP) parameters improved. The spatio-temporal gait parameters including of step length, stride length, and velocity was increased, and cadence decreased. Further the quality of life of patients with Parkinson's disease was improved. Based on these findings, Dynamic tubing gait training (I and II) could be applied as a new approach to improve posture, gait, quality of life in chronic patients with Parkinson's disease for more than 5 years, whose drug resistance is halved.

• Geophysics and Geophysical Exploration
• /
• v.1 no.3
• /
• pp.161-169
• /
• 1998

The Kunsan basin is a pull-apart basin which was formed during Tertiary. The pre-Tertiary section consists of various rock types, such as meta-sediments, igneous rocks, carbonates, clastics, and volcanics. Tertiary sections are the main targets for the petroleum exploration. In order to determine the optimum processing parameters of the basin, about 12 kinds of test processings were performed. The first main steps for the quality control is to determine the noisy or bad traces by examining the near trace section and shot gathers. The true amplitude recovery was applied to account for the amplitude losses due to spherical divergence and inelastic attenuation. Source designature and predictive deconvolution test were conducted to determine the optimum wavelet parameters and to remove the multiples. Velocity analysis was performed at 1km intervals. The optimum mute function was picked by locating the range of offsets which gives the best stacking response for any particular reflections. Post-stack deconvolution was tested to see if the quality of stacked data improved. The stacked data was migrated using a finite difference algorithm. The migration velocity was obtained from the stacking velocities using the time varying percentages. The AGC sections were provided for the structural interpretation. The RAP sections were used for DHI analysis and for the detection of volcanics.